Canon projector LXMU500 User Manual

ENGLISH
MULTIMEDIA PROJECTOR
LX-MW500/LX-MU500
User’s Manual 

2
Table of Contents
Table of Contents ........................... 2
Safety instructions ......................... 3
Contents of package ..................... 15
Projector exterior view ................ 16
Controls and functions ................ 17
Positioning your projector  .......... 21
Choosing a location ......................... 21
Obtaining a preferred projected image 
size .................................................. 22
Shifting the projection lens vertically...

3
ENGLISH
Safety instructions
Before installing and operating the projector, read this manual thoroughly.
This projector provides many convenient features and functions. Operating the projector properly enables 
you to manage those features and maintain it in good condition for many years to come.
Improper operation may result in not only shortening the product life, but also malfunctions, fire hazards, 
or other accidents.
If your projector does not seem to be operating properly, read this manual again,...

4
Copyright notice
Please note that enlarging or reducing the size of an image for commercial purposes or public 
presentation any infringe on the legally protected copyright or the copyright holder of the original 
material.
Ensure Network Security
Take measures to ensure network security. Note that Canon is not liable in any way for direct or indirect 
loss from network security incidents, such as unauthorized access.
Examples of Security Measures
• Use in an intranet environment.
• Assign a private IP...

5
ENGLISH
Safety Precautions
WARNING:
• THIS APPARATUS MUST BE GROUNDED.
• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLI-
ANCE TO RAIN OR MOISTURE.
• This projector produces intense light from the projection lens. Do not stare directly into the lens, 
otherwise eye damage could result. Be especially careful that children do not stare directly into the 
beam.
• Install the projector in a proper position. Otherwise it may result in a fire hazard.
• Allowing the proper amount of...

6
Do not place this projector on an unstable cart, stand, or table. The projector may fall, causing serious 
injury to a child or adult, and serious damage to the projector. Use only with a cart or stand recommended 
by the manufacturer, or sold with the projector. For wall or shelf mounting, use a tool such as a mounting 
kit to secure the projector.
An appliance and cart combination should be moved with care.
Sudden stops, excessive force, and uneven surfaces may cause the appliance and cart...

7
ENGLISH
AC Power Cord Requirement
The AC Power Cord supplied with this projector meets the requirements for use in the country you 
purchased it.
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY 
ACCESSIBLE.AC Power Cord for the Un
ited States and Canada:
The AC Power Cord used in the United  States and Canada is listed by the 
Underwriters Laboratories (UL) and certified by the Canadian Standard 
Association (CSA).
The AC Power Cord has a grounding-type AC line plug.  This is a...

8
Safety Symbols in this Manual
This section describes the safety symbols used in this manual. Important projector safety information is 
identified by the following symbols. Always observe the safety information by these symbols.
Federal Communication Commission Notice
Multimedia Projector, Model: LX-MW500/LX-MU500
This device complies with Part 15 of the FCC Rules.  Operation is subject to the following two 
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept...

9
ENGLISH
Precautions for Use
As this section contains important safety-related information, be sure to read the following carefully 
beforehand in order to use your projector correctly and safely.
If the following situations occur, turn the power off, remove the power plug from the power outlet and 
contact the Canon Customer Support Center. Failure to do so could cause a fire or result in an electric 
shock. 
• If smoke is emitted
• If an unusual smell or noise is emitted
• If a loud noise is heard and...

10
Precautions for Installation
Pay attention to the following points regarding the power source, power plug and handling of the 
connector. Failure to do so could result in a fire, electric shock or personal injury. 
• Do not use any power source with a voltage other than the voltage indicated (AC 100 – 240 V).
• Do not pull the power cord and be sure to hold the power plug or connector when removing. The 
cord could be damaged as a result.
• Do not insert any metal objects into the contact parts of the...