Canon Projector LX-MU500 User Manual
Have a look at the manual Canon Projector LX-MU500 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
81 ENGLISH Control Commands You can control this projector by sending commands via CONTROL port or LAN port. System Requirement CONTROL port **When using HDBaseT. LAN port/HDBaseT input terminal Control Command Connection Cable 9-pin RS-232-C Cable (Crossover) Communication Mode RS-232-C asynchronous, half-duplex communication Baud Rate 19200 bps/9600bps** Character Length 8 bit Parity Check None Stop Bits 1 bit Flow Control None Connection System TCP/IP Connection Port 33336 FunctionRead/ WriteOperationCommand (ASCII)Note PowerW Power On POWER=ONEnable during “Standby” state. W Power Off POWER=OFF R Power Status GET=POWEREnable during any power state. [Warming up] g:POWER=OFF2ON [Cooling down] g:POWER=ON2OFF Source SelectionW Computer1 INPUT=DSUB1 W Computer2 INPUT=DSUB2 W HDMI/MHL INPUT=HDMI1 W HDMI2 INPUT=HDMI2 W HDBaseT INPUT=HDBASET W Video INPUT=VIDEO W S-Video INPUT=S-VIDEO R Current source GET=INPUT
82 Audio ControlW Mute On MUTE=ON W Mute Off MUTE=OFF R Mute Status GET=MUTE W Volume + RC=VOL_P W Volume - RC=VOL_M R Volume Status GET=AVOL Image ModeW Presentation IMAGE=PRESENTATION W Standard IMAGE=STANDARD W sRGB IMAGE=SRGB W Movie IMAGE=MOVIE W DICOM IMAGE=DICOM W User1 IMAGE=USER_1 W User2 IMAGE=USER_2 R Image Mode GET=IMAGE AspectW Aspect 4:3 ASPECT=4:3 W Aspect 16:9ASPECT=16:9 W Aspect Auto ASPECT=AUTO W Aspect RealASPECT=TRUE W Aspect 16:10ASPECT=16:10 R Aspect Status GET=ASPECT Image Flip H/VW Front Table IMAGEFLIP=NONE W Rear Table IMAGEFLIP=REAR W Front Ceiling IMAGEFLIP=CEILING W Rear Ceiling IMAGEFLIP= REAR_CEIL RImage flip H/V StatusGET=IMAGEFLIP Auto SearchW Auto search On QAS=ON W Auto search Off QAS=OFF R Auto search status GET=QAS LampR Lamp Hour GET=LMPT WLamp Mode NormalLAMP=NORMAL WLamp Mode EconomicLAMP=ECO R Lamp Mode Status GET=LAMP
83 ENGLISH Control Response OperationW Blank On BLANK=ON W Blank Off BLANK=OFF R Blank Status GET=BLANK W Freeze On FREEZE=ON W Freeze Off FREEZE=OFF R Freeze Status GET=FREEZE W Menu On MENU=ON W Menu Off MENU=OFF W Auto PC RC=AUTOPC W Up RC=UP W Down RC=DOWN W Right RC=RIGHT W Left RC=LEFT W OK RC=OK High AltitudeWHigh Altitude mode OnHIGHALT=ON WHigh Altitude mode OffHIGHALT=OFF RHigh Altitude mode statusGET=HIGHALT Read/ WriteConditionResponseExample W Success i:OK< BLANK=ON > i:OK WIllegal format : Dont exist command or structuree:0002 INVALID_COMMAND< INVALID=ON > e:0002 INVALID_COMMAND WUnsupported item: this command parameter cant supporte:000A INVALID_PARAMETER< BLANK=INVALID > e:000A INVALID_PARAMETER WBlock item: Current state cant use.e:1011 FUNCTION_NOT_AVAILABL E< ASPECT=AUTO > e:1011 FUNCTION_NOT_AVAILABLE RSuccessg:XXX=YYY XXX=Command Name, YYY=Parameter Name< GET=BLANK > g:BLANK=ON
84 • If the projector didn’t receive to finish a command within 5 seconds, it will timeout and you need to resend the command. • No case sensitive.RUnsupported item: this command parameter cant supporte:000A INVALID_PARAMETER< GET=INVALID > e:000A INVALID_PARAMETER
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A. INC. One Canon Park, Melville, New York 11747, U.S.A. For all inquires concerning this product, call toll free in the U.S. 1-800-OK-CANON CANON EUROPE LTD. 3 The Square, Stockley Park, Uxbridge, Middlesex, UB11 1ET United Kingdom CANON EUROPA N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands ©CANON INC.2015