Canon projector LVWX300 User Manual

51
ENGLISH
• During standby
• During input source switching
• During command processing
• During AUTO PC execution
• Before the splash screen disappears after the power is turned on.
• Use 1 computer to control/monitor 1 projector.
• For how to control/monitor using PJLink™, see the operation manual of the PJLink™ 
application you use.
• When you monitor the projectors operating state using this function by issuing inquiry 
commands successively, issue an inquiry command after receiving the response to...

52
Menu operation
Menu system
Please note that the on-screen display (OSD) menus vary according to the signal type selected.
* Indicates an item that is factory-set (after reset).
Main menu Sub-menu Options
1. DISPLAY
Screen ColorOff*/Light Yellow/Pink/Light 
Green/Blue/Blackboard
AspectAuto*/Real/16:10 (LV-WX300 
only)/4:3/16:9
Keystone
Position
Phase
H. Total Dots
D.Zoom
3DAuto*/Frame Sequential/Frame 
Packing/Top-Bottom/Side-By-
Side
3D Sync Normal*/Invert
2. PICTURE
Image...

53
ENGLISH
* Indicates an item that is factory-set (after reset).
Main menu Sub-menu Options
4. 
SYSTEM 
SETUP: Basic
Presentation 
TimerPreset Time 1~240 minutes
Timer Display Always*/1 min/2 min/3 min/Never
PositionTop-Left*/Bottom-Left/Top-Right/
Bottom-Right
Counting 
DirectionCount Down*/Count Up
Sound Reminder On*/Off
On/Off*
Language
Image flip H/VFront Table*/Rear Table/Front 
Ceiling/Rear Ceiling
Auto Power OffDisable/5 min/10 min/15 min/
20 min*/25 min/30 min
Blank TimerDisable*/5 min/10 min/15...

54
• * Indicates an item that is factory-set (after reset).
• The menu items are available when the projector detects at least one valid signal. If there is no 
equipment connected to the projector or no signal detected, limited menu items are accessible. 
Main menu Sub-menu Options
5. 
SYSTEM 
SETUP: 
Advanced
Security SettingsChange Password
Power On Lock On/Off*
Closed Caption 
SettingsClosed Caption On/Off*
Caption Channel CC1*/CC2/CC3/CC4
LAN Settings (LV-
X300/LV-WX300 
only)Standby LAN Off*/On...

55
ENGLISH
Description of each menu
FUNCTIONDESCRIPTION
Screen ColorCorrects the projected picture’s color when the projection 
surface is not white. See Using Screen Color on page 39 
for details.
AspectThere are several options to set the images aspect ratio 
depending on your input signal source. See Selecting the 
aspect ratio on page 35 for details.
KeystoneCorrects any keystoning of the image. See Correcting 
keystone on page 34 for details.
PositionDisplays the position adjustment page. To move...

56
FUNCTIONDESCRIPTION
Image ModePre-defined image modes are provided so you can optimize 
your projector image set-up to suit your program type. See 
Selecting a image mode on page 37 for details.
BrightnessAdjusts the brightness of the image. See Adjusting 
Brightness on page 37 for details.
ContrastAdjusts the degree of difference between dark and light in 
the image. See Adjusting Contrast on page 37 for details.
ColorAdjusts the color saturation level -- the amount of each color 
in a video image....

57
ENGLISH
FUNCTIONDESCRIPTION
Presentation TimerReminds the presenter to finish the presentation within a 
certain time frame. See Setting the presentation timer on 
page 40 for details.
LanguageSets the language for the On-Screen Display (OSD) menus. 
See Using the menus on page 29 for details.
Image flip H/VSee Choosing a location on page 19 for details.
Auto Power OffAllows the projector to turn off automatically if no input 
signal is detected and no operation is made by user after a 
set period of...

58
FUNCTIONDESCRIPTION
Closed Caption SettingsClosed Caption Settings
Activates the function by selecting On when the selected 
input signal carries closed captions.
• Captions: An on-screen display of the dialogue, 
narration, and sound effects of TV programs and 
videos that are closed captioned (usually marked as 
CC in TV listings).
When the projector displays OSD or any dialog, 
captions are not displayed at the same time.
Caption Channel
Selects a preferred closed captioning mode. To view...

59
ENGLISH
Maintenance
Care of the projector
Your projector needs maintenance from time to time, depending on the environmental circumstances, and 
should be done by authorized service technicians only. Contact your dealer for instructions.
The only thing you can do yourselves on a regular basis is to keep the lens and cabinet clean.
Never remove any parts of the projector except the lamp. Contact your dealer if other parts need replacing. 
Cleaning the lens
Clean the lens whenever you notice dirt or...

60
Lamp information
Getting to know the lamp hour
When the projector is in operation, the duration (in hours) of lamp usage is automatically calculated by the 
built-in timer. The method of calculating the equivalent lamp hour is as follows:
Total Lamp Hour = (hours used in Normal mode) + 5/6*(hours used in Economic mode)
See Setting Lamp Mode as Economic below for more information on Economic mode.
To obtain the lamp hour information:
1. Press MENU and then press  /  until the SYSTEM SETUP: Advanced...