Canon projector LVS3 User Manual

31
Video input
Input Source Selection ( Component, RGB Scart 21-pin )
Menu Operation Direct Operation
Choose Computer by pressing INPUT button on the top control or
COMPUTER button on the remote control unit.
Before using these buttons, correct input source should be selected
through menu operation as described below.
Press MENU button to display the On-Screen Menu.  Press
Point 
7 8button to move the red frame pointer to INPUT Menu
icon.
Press Point dbutton to move the red arrow pointer to
Computer and...

32
Video Input
AV SYSTEM MENU (VIDEO OR S-VIDEO)
AV SYSTEM MENU (COMPONENT VIDEO)
Video System Selection
Press MENU button to display the On-Screen Menu.  Press
Point 
7 8buttons to move the red frame pointer to AV System
Menu icon.
Press Point dbutton to move the red arrow pointer to the
system that you want to select and then press SET button.
1
2
If projector cannot reproduce proper video image, it is necessary to
select a specific broadcast signal format among PAL, SECAM, NTSC,
NTSC 4.43, PAL-M, and...

33
Video Input
Menu Operation
Press MENU button to display the On-Screen Menu.  Press
Point 
7 8button to move the red frame pointer to Image Select
Menu icon.1
2Press Point d dbutton to move the red frame pointer to the level
that you want to set and then press SET button.
Move the red frame pointer to the
level and press SET button.
The level being selected.
IMAGE SELECT MENU
Normal picture adjustment preset on this projector.Standard
Picture level adjusted for the picture with fine tone.Cinema
User...

34
Video Input
Press Point 7 8buttons
to adjust value.
Press MENU button to display the On-Screen Menu.   Press
Point 
7  8buttons to move the red frame pointer to IMAGE
ADJUST Menu icon.1
2Press Point dbutton to move the red frame pointer to the item
that you want to adjust and then press SET button.  The level of
each item is displayed.  Adjust each level by pressing Point 
7 8
buttons.
Move the red frame point-
er to the item to be select-
ed and then press SET but-
ton.
IMAGE ADJUST MENU
Image Level...

35
Video Input
Screen Size Adjustment
This projector has a picture screen resize function, which enables you to display the desirable image size.
Press MENU button to display the On-Screen Menu.  Press
Point 
7  8buttons to move the red frame pointer to Screen
Menu icon.
Press Point dbutton and move the red frame pointer to the
function that you want to select and then press SET button.
1
2
Note: The Screen Menu cannot be operated when
“720p,” “1035i,” or “1080i” is selected on the
AV System Menu( 
 P32...

36
Keystone
This function corrects the distorted image. Select either of Store or
Reset and press SET button. The keystone dialog box will appear. 
( 
P20 )
Store ···· Store the keystone adjustment data even if the AC
power   cord is disconnected.
Reset ···· Reset the keystone adjustment data when the AC
power cord is disconnected from the AC outlet.
Setting Menu
Press MENU button to display the On-Screen Menu.   Press
Point 
7  8buttons to move the red-frame pointer to  SETTING
icon.1
2
Language...

37
Setting
For reducing power consumption as well as maintaining the lamp
life, the Power Management function turns off the projection lamp
when the input signal is interrupted and no button is pressed for 30
seconds or more. 
If the input signal is interrupted and no button is pressed for 30
seconds or more, the timer display with the message  No signal 
appears on the screen. The count-down of the set time will get
started. The count-down time can be set between 1 and 30
minutes. 
When the count-down...

38
Setting
Remote control unit
This projector has two different remote control codes; the factory-
set normal code (Code 1) and the secondary code (Code 2).  This
switching function prevents remote control interference when
operating several projectors or video equipment at the same time.  
When operating the projector in “Code 2,”  both the projector and
remote control must be switched to “Code 2.”  
To change the code of the projector :
Set the remote control unit in the SETTING MENU to “Code 2.”
To...

39
FREEZENO SHOWP-TIMER
R-CLICK
COMPUTERVIDEO
L-CLICK
PAGE
PRESENTATION
qPAGEbuttons
Scroll back and forth pages on the screen when giving  presentations.
Installation
Connect the Projector and your computer
with the VGA cable. 
q
r
w
y
t
u
i
o
e
For computer
Aim the presentation remote control unit  at the Presentation
Remote receiver. 
wCursor button
Scroll back and forth pages on the screen when giving a presentation.
eR-CLICK button
Acts as the right button on a computer mouse.
rL-CLICK button
Acts...

40
Lamp Replace
When the life of the projection lamp draws to an end, LAMP
REPLACE indicator lights yellow.  If this indicator lights yellow,
replace the projection lamp with a new one promptly.
ORDER REPLACEMENT LAMP
Replacement Lamp can be ordered through your dealer.  When ordering a projection lamp, give the following
information to the dealer.
•Model No. of your projector   : LV-S3
•Replacement Lamp Type No. : LV-LP20
(610 308 3117)
For continued safety, replace with a lamp assembly of
the same...