Canon projector LV8235 UST User Manual

41
Select Digital zoom +. The On-Screen Menu disappears 
and D . zoom + appears. Press the OK button to expand the 
image size. Use the Point  buttons to pan the image. 
The Panning function can work only when the image is 
larger than the screen size.
A projected image can be also expanded by pressing the 
D.ZOOM + or the OK button on the remote controller. 
To exit the Digital zoom +/– mode, press any button except 
the D.ZOOM +/– and the OK buttons.
Select Digital zoom -. The On-Screen Menu...

42
Computer Input
Keystone
This function is used to adjust keystone distortion of the  
projected image. Use the Point  buttons to choose the 
item you want to adjust.
 Keystone
    
To correct keystone distortion, press the OK button.  
Keystone appears on the screen. Use the Point  
buttons to correct keystone distortion (p.28).
 Store
    
To store or reset the keystone correction, press the Point 
 button.
    Store ..... 
Keep the keystone correction even when the AC 
power cord is unplugged....

43
Choose VIDEO or S-VODEO by pressing the VIDEO button 
or the S-VIDEO button on the remote controller. 
1
2
Input Menu
Input Source Selection (VIDEO, S-VIDEO)
Video Input
When  video  input  signal  is  connected  to  the 
VIDEO jack, select VIDEO.VIDEO
When  video  input  signal  is  connected  to  the 
S-VIDEO jack, select S-VIDEO.S-VIDEO
Note:  When the Auto input function is set to On 1 or On 2 in 
the Auto setup function, the input signal will be searched 
automatically (p.53).
3D
Remote...

44
Choose COMPUTER 1(COMPONENT) or COMPUTER 1 
(SCART) by pressing the the COMPONENT or COMPUTER 
1 button on the remote controller; choose HDMI by pressing 
the HDMI button on the remote controller. 
Before using these buttons, correct input source should be 
selected through Menu operation as described below.
1
Input Menu
2Use the Point  buttons to select COMPUTER 1 
and
then press the Point  button; use the Point  
buttons to select ANALOG PC, COMPONENT or 
SCART and then press the OK button....

45
Video Input
3D
Image Select Menu
IMAGE button
Presentation
High contrast
User 1
User 2
User 3
Image Mode Selection 
User 4
Cinema
Standard
Remote Controller
IMAGE button
Select  the  desired  image  mode  among Presentation, 
Standard, High  contrast, Cinema, User  1, User  2, User 
3, and User 4 by pressing the IMAGE button on the remote 
controller.
Picture mode with improved halftone for graphics.
Direct Operation
For viewing pictures in a bright room.
Normal picture mode preset on the projector....

46
Video Input
Image Adjustment
1
2
Press the Point  button to decrease the contrast; press the 
Point  button to increase the contrast (from 0 to 63).
Press  the  Point   button  to  decrease  the  brightness;  press  
the Point  button to increase the brightness (from 0 to 63).
Press the Point  button to lighten red tone; press the Point 
 button to deepen red tone (from 0 to 63).
Press  the  Point   button  to  lighten  green  tone;  press  the 
Point  button to deepen green tone (from 0 to...

47
Video Input
Use  the  Point   buttons  to  adjust  the  gamma  value  to 
obtain  a  better  balance  of  contrast  (Default, 1 .8, 2 .0, 2 .2, 
2 .4, or 2 .6).
Press  the  Point   button  to  decrease  the  sharpness  of  the 
image;  press  the  Point   button  to  increase  the  sharpness 
of the image (from 0 to 15).
An  interlaced  video  signal  can  be  displayed  in  progressive 
mode. Select one of the following options.
 Off .........  Disabled.
 L 1 .........  For an active picture.
 L...

48
Video Input
This projector has the picture screen resize function, which enables you\
 to customize the image size.
Screen Size Adjustment
Aspect Menu1
2
Adjust the screen scale and position manually with this 
function.
Press the Point  button at Custom adj . and the Custom 
adjustment menu is displayed on the screen, you can use 
the Point  buttons to choose the item you want to adjust.
 Scale H/V ........ 
Adjust the Horizontal/Vertical screen scale.
 H&V ................. 
When set to On, the...

49
Video Input
Keystone
This function is used to adjust keystone distortion of the  
projected image. Use the Point  buttons to choose the 
item you want to adjust.
 Keystone
    
To correct keystone distortion, press the OK button.  
Keystone appears on the screen. Use the Point  
buttons to correct keystone distortion (p.28).
 Store 
    
To store or reset the keystone correction, press the Point 
 button.
    Store ..... 
Keep the keystone correction even when the AC 
power cord is unplugged....

50
3D Display
For Viewing 3D Contents
Note:
     Unplug the power cords of both the 
     projector and external equipment from  
     the AC outlet before connecting cables.
Infrared Emitter
3D SYNC OUT
Sync Signal Cable(Supplied with the IR Emitter)
Stereoscopic Wireless LCD Glasses
3D SYNC Input
When using DLP Link compatible glasses, follow these 
steps:
1. Turn on the projector and the 3D glasses.
2.  Wear the 3D glasses and press the 3D button on the 
remote controller to activate 3D Display...