Canon projector LV8225 User Manual

VIDEO	Input
51
Setting
Setting	MenuPress the MENU button to display the On-Screen Menu. Press the Point ▲▼ buttons to select Setting and press the Point ► or the OK button to access the submenu items.
1
2Use the Point ▲▼ buttons to select the desired item and then press the Point ► or the OK button to access the selected item.
This projector has a Setting menu that allows you to set up the other va\
rious functions described below.
Language
Menu	position
This function is used to change the position of...

5

Setting

Note:  • During Auto	input is in progress, If the MENU button or the POWER button is pressed, Auto	input will stop. If the COMPUTER 1/ button oror VIDEO or COMPONENT or S-VIDEO button is pressed, Auto	input will stop and go back to the button's input signal.   • Auto	input, Auto	PC and Auto	Keystone can not be set Off at the same time.    • Auto	Keystone corrects vertical distortion only, not correct horizontal distortion.  • The Auto Keystone function can not work when the...

Setting

53

Setting

This function decides whether to display On-Screen Displays. On............................ Show all the On-Screen displays. Use this function when you want to project images after the lamp becomes bright enough. The factory default setting is in this option. Countdown	Off....... Show the input image instead of the countdown when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough. Off...

54

Setting

Capture
Capture
This function enables you to capture an image being projected to use it for a starting-up display or interval of presentations.
Select Capture and press the OK button.  A confirmation box appears and select Yes to capture the projected image.
After capturing the projected image, go to the Logo select function and set it to User. Then the captured image will be displayed the next time you turn on the projector or when you press the BLANK button (p 9). 
To cancel the...

Setting

55

Setting

Enter	a	Logo	PIN	codeUse the Point ▲▼ buttons to enter a number. Press the Point ◄► buttons to fix the number and move the red frame pointer to the next box. The number changes to . If you fixed an incorrect number, use the Point ◄► buttons to move the pointer to the number you want to correct, and then enter the correct number.
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to Set. Press the OK button so that you...

56

Setting

Terminal
The COMPUTER IN /MONITOR OUT terminal on the back of the projector is switchable for computer input or monitor output (p.11). Select COMPUTER 2 or Monitor	Out with the Point ▲▼ buttons.
 COMPUTER 2 ....... computer input Monitor	Out	....... monitor out
Terminal function is not available when selecting COMPUTER 2 to the input source.  Change the input source to the others (COMPUTER	1,	and so on) so that the Terminal function will be available. (pp. 8,41,4)
Time left...

Setting

57

Setting

Standby	mode
This function is available when operating the projector via network. Network ....  Supply the power to the network function even after turning off the projector by pressing the POWER button on the remote control unit. You can turn on/off the projector via network, modify network environment, and receive an e-mail about projector status while the projector is powered off. Eco ............  Select Eco when you do not use the projector via network. The projector’s network...

58

Setting

Closed	Caption
Closed	Caption
Closed Caption is a printed version of the program sound or other information displayed on the screen. If the input signal contains closed captions, you can turn on the feature and switch the channels. Press the Pointthe Point ▲▼ buttons to select buttons to select Off, CC1, CC2, CC3 or CC4.  If the closed caption is not clear, you can change thef the closed caption is not clear, you can change the text from Color to White.
Press the Point ▲▼ buttons to select...

Setting

59

Setting

Remote	control	This projector provides two different remote control codes: the factory-set initial code (Code	1) and the secondary code (Code	2). This switching function prevents remote control unit interference when operating several projectors or video equipment at the same time.W h e n  o p e r a t i n g  t h e  p r o j e c t o r  i n C o d e	2,  b o t h the  projector  and  the  remote  control  unit  must  be switched to Code	2.
To	change	the	code	for	the	projector:Select...

60

Setting

Key	lockKey	lock
Security	(Key	lock	and	PIN	code	lock)
PIN	code	lock
This function locks the top control and remote control unit buttons to prevent operation by unauthorized persons.Select Key	lock and then press the OK button, and select the desired item by pressing the Point ▲▼ buttons.
 ..... Unlocked.
 .....  Lock the operation of the top control. To unlock, use the remote control unit. .....  Lock the operation of the remote control unit.  To unlock, use the top control.
If the top...