Canon projector LV8225 User Manual

Installation
1
The preparation display will disappear after 30 seconds.
(See page 59 for Lamp mode status.)
Turning	On	the	Projector
Connect  the  projector ’s  AC  power  cord  into  an AC outlet. The POWER indicator lights red. Open OpenOpen the lens cap.
Press  the  POWER  button  on  the  top  control  or on the remote control unit. The POWER indicator lights green and the cooling fans start to operate. The  preparation  display  appears  on  the  screen and the countdown starts. 
2
3
1Complete...



Basic	Operation

What	is	PIN	code?
PIN  (Personal  Identification  Number)  code  is  a  security code  that  allows  the  person  who  knows  it  to  operate  the projector.  Setting  a  PIN  code  prevents  unauthorized  use of the projector.
A  PIN  code  consists  of  a  four-digit  number.  Refer  to  the PIN  code  lock  function  in  the  Setting  Menu  on  pages 60-61 for locking operation of the projector with your PIN code.
Enter	a	PIN	code
Use  the  Point ▲▼  buttons  to  enter  a...

Basic	Operation

3

Basic	Operation

TO	MAINTAIN	THE	LIFE	OF	THE	LAMP,	ONCE	YOU	TURN	THE	PROjECTOR	ON,	WAIT	AT	LEAST	FIVE	MINUTES	BEFORE	TURNING	IT	OFF .
Power	off? disappears after 4 seconds.
Turning	Off	the	Projector
Press the POWER button on the top control or on the  remote  control  unit,  and Power	 off?	appears on the screen.
Press  the  POWER  button  again  to  turn  off  the projector.  The  POWER  indicator  starts  to  blink red,  and  the  cooling  fans  keep  running.  (You  can...

4

Basic	Operation

OK
POWER
AUTO SET
MENU
LAMP REPLACE
WARNING
VOLVOL

How	to	Operate	the	On-Screen	Menu
The projector can be adjusted or set via the On-Screen Menu.  The  menus  have  a  hierarchical  structure,  with a  main  menu  that  is  divided  into  submenus,  which are  further  divided  into  other  submenus.  For  each adjustment  and  setting  procedure,  refer  to  respective sections in this manual.
Use  the  Point ▲▼  buttons  to  highlight  or  select a  main  menu  item.  Press...

Basic	Operation

5

Basic	Operation

Main Menu
For detailed functions of each menu, see “Menu Tree” on pages 73-74.
Main Menu
③ Image	select Used to select an image mode from among Presentation, Standard, High	contrast, Cinema, Blackboard(Green),  Colorboard and User	1-4. (pp.35, 44)④ Image	adjust For Computer source, used to adjust computer image [Contrast, Brightness, Auto	iris, Color	temp., White	balance	(R/G/B), Sharpness, Gamma, Reset and	Store]. (p.36)     For VIDEO source, used to adjust...

6

Basic	Operation

Rotate the Zoom Ring to zoom in and out.  Rotate the Focus Ring to adjust the focus of the image.  
Zoom	and	Focus	Adjustment
If  a  projected  picture  still  has  keystone  distortion  after pressing  the  AUTO  SET  button  on  the  top  control  or the  remote  control  unit,  correct  the  image  manually  as follows:
Press the KEYSTONE button on the remote control unit. The  Keystone  dialog  box  appears.  Use  the  Point ▲▼ buttons  to  correct  keystone  distortion....

Basic	Operation

7

Basic	Operation

Sound	Adjustment
1
2
Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Sound. Press the Point ► or the OK button to access the submenu items. 
Press the VOLUME+/– buttons on the top control or on the remote control unit to adjust the volume. The volume dialog box appears on the screen for a few seconds.
Press the MUTE button on the remote control unit to select On to temporarily turn off the sound. To turn the sound back on,...

8

Basic	Operation

 High .............  Brighter than the Normal mode. Normal .........  Normal brightness  Eco ..............  Lower brightness reduces the lamp power consumption and extends the lamp life.
Remote	control	unit	Operation
Using the remote control unit for some frequently used operations is adv\
isable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Scre\
en Menu.
Press the COMPUTER 1/, VIDEO, S-VIDEO and COMPONENT...

Basic	Operation

9

Basic	Operation

BLANK	button
Press the P-TIMER button on the remote control unit to operate the Count up/Count down function. Refer to p.57 for detail of Setting for the P-timer function.To stop the count time, press the P-TIMER button.To cancel the P-timer function, press and hold the P-TIMER button.
P-TIMER	button
Press the IMAGE button on the remote control unit to select a desired image mode of the screen. See pages 35, 44 for details.
IMAGE	buttonBlank	disappears after 4...

30
Choose either COMPUTER	1	(ANALOG	PC)	or COMPUTER	2	(ANALOG	PC) by pressing the COMPUTER 1 or COMPUTER  button on the remote control unit.Before using these buttons, correct input source should be selected thro\
ugh Menu operation as described below.
1Input	Menu
2
3
Note:   When the Auto input function is set to On 1 or On 2 in the Auto setup function, the input signal will be searched automatically (p.5).
COMPUTER 1
Remote	control	unit
Press the MENU button to display the On-Screen Menu....