Canon projector LV7585 User Manual

1

Remote Control Unit
INPUT buttons
Input 
Press the INPUT 1, INPUT 2, or INPUT 3 buttons on the 
remote control unit. The input source appears on the screen 
as you press each button. Select the connected input 
source.
Remote Control Operation
Remote Control button operation
Side Control
INPUT button
Press the INPUT button on the side control. It switches to 
INPUT 1, INPUT 2, and INPUT 3 as you press the INPUT 
button. 
Before using the INPUT button on the side control, you 
must select a...



Computer Input Source Selection
WHEN SELECTING INPUT 1 (COMPUTER INPUT TERMINALS )
Press the MENU button to display the On-Screen Menu. Use 
the Point 7 8 buttons to move the red frame pointer to the 
INPUT Menu icon.
Use the Point ed buttons to move the red arrow pointer to 
the desired input and then press the OK button. The Source 
Select Menu appears. 
1
2
Input 1
INPUT MENU
Use the Point ed buttons to select the desired source and 
then press the OK button.3
When your computer is...



When the video input signal is connected to the Y-
Pb/Cb-Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr.
When the video input signal is connected to the 
VIDEO jack, select Video.
When the video input signal is connected to the S-
VIDEO jack, select S-Video.
When connecting to video equipment, select the type of 
Video source in the Source Select Menu. 
WHEN SELECTING INPUT  (AV TERMINALS ) WHEN SELECTING INPUT  (5 BNC INPUT jACKS )
When the video input signal is connected to the Y-...

4

Computer System Selection
This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, SXGA+, 
WXGA, or UXGA (refer to “Compatible Computer Specifications” on pages 71–72). If a com\
puter is selected 
as a signal source, this projector automatically detects the signal format and tunes to project a proper image 
without any additional settings. (Some computers need to be set manually.) 
One of the following messages may appear when:
The projector cannot...

5

Auto PC Adjustment
Auto  PC  Adjustment  function  is  provided  to  automatically  adjust  Fine  sync, Total  dots,  Horizontal  and  Vertical  
positions to conform to your computer. 
Press  the  MENU  button  to  display  the  On-Screen  Menu.  Use 
the  Point 7  8  buttons  to  move  the  red  frame  pointer  to  the 
PC Adjust Menu icon.
1
2Use  the  Point ed  buttons  to  move  the  red  frame  pointer  to 
the AUTO PC adj. icon and then press the OK button twice.PC AD
jUST MENU
Auto PC...

6

Manual PC Adjustment
Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector. 
Manual PC Adjustment enables you to precisely adjust several parameters to match those special signal formats. 
The projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to 
recall the setting for a specific computer. 
✔Note:   The PC Adjust Menu cannot be operated when the digital signal input on the DVI terminal is...

7

Exit the PC Adjust Menu.
To store the adjusted data, select Store and then press the OK 
button. Move the red arrow pointer to one of the Mode 1 to 10 in 
which you want to store, and then press the OK button.
To reset the adjusted data, select Reset and press the OK button. A 
confirmation box appears and then select [Yes]. All adjustments will 
return to their previous figures.To store the adjusted data . To clear the adjusted data .
To clear the adjusted data, select Mode free and then press...

8

Press the MENU button to display the On-Screen Menu. Use 
the Point 7 8 buttons to move the red frame pointer to the 
Image Select Menu icon.
1
2Use the Point ed buttons to move the red frame pointer to 
the desired image level and then press the OK button.
IMAGE SELECT MENU
Normal picture level preset on the projector.
Standard
Picture level with improved halftone for graphics.
High contrast
User preset picture adjustment in the Image Adjust Menu. (p. 47)
Custom 1–10
Image Level Selection
Menu...

9

Screen Size Adjustment
Select the desired screen size that conforms to the input signal source.
Press the MENU button to display the On-Screen Menu. Use 
the Point 7 8 buttons to move the red frame pointer to the 
Screen Menu icon.
1
Use the Point ed buttons to move the red frame pointer to 
the desired function and then press the OK button.2
Normal
SCREEN MENU
Provide the image at the normal computer aspect ratio of 4:3.
Wide
True
Provide the image in its original size. When the original image...

40

Select Digital zoom +. The On-Screen Menu disappears and        
“D- zoom +” appears. Press the OK button to expand the image 
size. Use the Point ed7 8 buttons to pan the image. The Panning 
function can work only when the image is larger than the screen 
size.
You can also enter the Digital zoom + mode by pressing the 
D-ZOOM button on the remote control unit.
Digital zoom +
Select Digital zoom –. The On-Screen Menu disappears and         
“D- zoom –” appears. Press the OK button to compress the...