Canon projector LV7392A User Manual

Installation
21
The preparation display will disappear after 30 seconds.
(See page 59 for Lamp mode status.)
Turning	On	the	Projector
Connect the projector’s AC power cord into an  AC  outlet.  The  POWER  indicator  lights red. Open the lens cap.
Press the POWER button on the top control or  on  the  remote  control  unit. The  POWER indicator  lights  green  and  the  cooling  fans start  to  operate.  The  preparation  display appears  on  the  screen  and  the  countdown starts. 
2
3
1Complete...

22
Basic	Operation
What	is	PIN	code?
PIN  (Personal  Identification  Number)  code  is  a security  code  that  allows  the  person  who  knows it  to  operate  the  projector.  Setting  a  PIN  code prevents unauthorized use of the projector.
A  PIN  code  consists  of  a  four-digit  number.  Refer to  the  PIN  code  lock  function  in  the  Setting  Menu on  pages  60-61  for  locking  operation  of  the projector with your PIN code.
Enter	a	PIN	code
Use  the  Point ▲▼  buttons  to  enter  a  number....

Basic	Operation
23
Basic	Operation
TO	MAINTAIN	THE	LIFE	OF	THE	LAMP,	ONCE	YOU	TURN	THE	PROjECTOR	ON,	WAIT	AT	LEAST	FIVE	MINUTES	BEFORE	TURNING	IT	OFF .
Power	off? disappears after 4 seconds.
Turning	Off	the	Projector
Press the POWER button on the top control or  on  the  remote  control  unit,  and Power	off?	appears on the screen.
Press  the  POWER  button  again  to  turn  off the  projector.  The  POWER  indicator  starts to  blink  red,  and  the  cooling  fans  keep running.  (You  can  select  the...

24
Basic	Operation
OK
P OWER
AU TO  S ET
MENU
LAMP REPLACE
WARNING
VOL
VOL
How	to	Operate	the	On-Screen	Menu
T h e   p r o j e c t o r   c a n   b e   a d j u s t e d   o r   s e t   v i a t h e   O n - S c r e e n   M e n u .   T h e   m e n u s   h a v e   a hierarchical  structure,  with  a  main  menu  that  is divided into submenus, which are further divided into  other  submenus.  For  each  adjustment  and setting procedure, refer to respective sections in this manual.
Use  the  Point ▲▼  buttons...

Basic	Operation
25
Basic	Operation
Main Menu
For detailed functions of each menu, see “Menu Tree” on pages 73-74.
Main Menu
③ Image	select Used to select an image mode from among Presentation, Standard, High	contrast, Cinema, Blackboard(Green),  Colorboard and User	1-4. (pp.35, 44)
④ Image	adjust For Computer source, used to adjust computer image [Contrast, Brightness, Auto	iris*, Color	temp., White	balance	(R/G/B), Sharpness, Gamma, Reset and	Store]. (p.36)     For VIDEO or HDMI source, used to adjust...

26
Basic	Operation
Rotate the Zoom Ring to zoom in and out.  Rotate the Focus Ring to adjust the focus of the image.  
Zoom	and	Focus	Adjustment
If  a  projected  picture  still  has  keystone  distortion after  pressing  the  AUTO  SET  button  on  the  top control  or  the  remote  control  unit,  correct  the image manually as follows:
Press  the  KEYSTONE  button  on  the  remote control  unit.  The  Keystone  dialog  box  appears. Use  the  Point ▲▼  buttons  to  correct  keystone distortion.  The...

Basic	Operation
27
Basic	Operation
1
2
Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Sound. Press the Point ► or the OK button to access the submenu items. 
Press the VOLUME+/– buttons on the top control or on the remote control unit to adjust the volume. The volume dialog box appears on the screen for a few seconds.
Press the MUTE button on the remote control unit to select On to temporarily turn off the sound. To turn the sound back on, press the MUTE button...

28
Basic	Operation
 High ...........  Brighter than the Normal mode. Normal  ...... Normal brightness  Eco ............  Lower brightness reduces the lamp power consumption and extends the lamp life.
Remote	control	unit	Operation
Using the remote control unit for some frequently used operations is adv\
isable. Just pressing one of the buttons enables you to make the desired operation quickly without callin\
g up the On-Screen Menu.
Press the COMPUTER, HDMI, VIDEO, S-VIDEO and COMPONENT buttons on the...

Basic	Operation
29
Basic	Operation
BLANK	button
Press the P-TIMER button on the remote control unit to operate the Count up/Count down function. Refer to p.57 for detail of Setting for the P-timer function.To stop the count time, press the P-TIMER button.To restart the P-timer, press the P-TIMER button again.To cancel the P-timer function, press and hold the P-TIMER button.
P-TIMER	button
Press the IMAGE button on the remote control unit to select a desired image mode of the screen. See pages 35, 44 for...

30
LV-RC0 6
Choose COMPUTER	(ANALOG	PC) by pressing the COMPUTER button on the remote control unit.
1Input	Menu
2
3
Note:   When  the Auto  input  function  is  set  to On  1  or On 2  in  the Auto  setup  function,  the  input  signal  will  be searched automatically (p.52).
COMPUTER
Remote	control	unit
Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Input and then press the Point ► or the OK button. 
Use the Point ▲▼ buttons to select COMPUTER and then press the...