Canon projector LV7370 User Manual
Have a look at the manual Canon projector LV7370 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 47
8
. Conven ent Features
❹ Preventing the Unauthorized Use of the Projector [Password]
A password can be set for your projector to avoid operation by an unauthorized user using the Menu. When a
password is set, turning on the projector will display the password input screen. Unless the correct password is
entered, the projector cannot project an image.
NOTE: The [Password] setting cannot be cancelled by using the [Reset] of the menu.
To enable the...](http://img.usermanuals.tech/thumb/14/1286/w64_projector-lv7370-1478290321_d-46.png "Page 47
8
. Conven ent Features
❹ Preventing the Unauthorized Use of the Projector [Password]
A password can be set for your projector to avoid operation by an unauthorized user using the Menu. When a
password is set, turning on the projector will display the password input screen. Unless the correct password is
entered, the projector cannot project an image.
NOTE: The [Password] setting cannot be cancelled by using the [Reset] of the menu.
To enable the...")
![Page 48
9
t he [Confirm password] screen will be displayed.
NOTE: Do not forget your password. If you forget your password, contact your dealer.
7.
Type in the same combination of
buttons and press the OK button.
t
he confirmation screen will be displayed.
8.
Select [Yes] and press the OK button.
t he Password function has been enabled.
To turn on the projector when Password is enabled:
1. Press the Main Power Switch to the On position (I).
2. Press and hold the POWER button for about 1...](http://img.usermanuals.tech/thumb/14/1286/w64_projector-lv7370-1478290321_d-47.png "Page 48
9
t he [Confirm password] screen will be displayed.
NOTE: Do not forget your password. If you forget your password, contact your dealer.
7.
Type in the same combination of
buttons and press the OK button.
t
he confirmation screen will be displayed.
8.
Select [Yes] and press the OK button.
t he Password function has been enabled.
To turn on the projector when Password is enabled:
1. Press the Main Power Switch to the On position (I).
2. Press and hold the POWER button for about 1...")
![Page 49
0
To disable the Password function:
1. Press the MENU button.
t
he menu will be displayed.
2.
Select [Setup]
→ [Installation] → [Password] and press the OK button.
t he Off/On menu will be displayed.
3. Select [Off] and press the OK button.
t he Password Confirmation screen will be displayed.
4. Type in your password and press the OK button.
When the correct password is entered, the Password function will be disabled.
NOTE: If you forget your password, contact your dealer.
....](http://img.usermanuals.tech/thumb/14/1286/w64_projector-lv7370-1478290321_d-48.png "Page 49
0
To disable the Password function:
1. Press the MENU button.
t
he menu will be displayed.
2.
Select [Setup]
→ [Installation] → [Password] and press the OK button.
t he Off/On menu will be displayed.
3. Select [Off] and press the OK button.
t he Password Confirmation screen will be displayed.
4. Type in your password and press the OK button.
When the correct password is entered, the Password function will be disabled.
NOTE: If you forget your password, contact your dealer.
....")
![Page 51
Network Sett ngs
http:// /index.html
DHCP ..................................Enabling this option automatically assigns an IP address to the projector from your DHCP ser v-
er. Disabling this option allows you to register the IP address or subnet mask number obtained
from your network administrator.
NOTE:
The IP address of the projector is required to change the network settin\
g.
The IP address will not be displayed on the projector’s menu.
Consult your network administrator for the IP...](http://img.usermanuals.tech/thumb/14/1286/w64_projector-lv7370-1478290321_d-50.png "Page 51
Network Sett ngs
http:// /index.html
DHCP ..................................Enabling this option automatically assigns an IP address to the projector from your DHCP ser v-
er. Disabling this option allows you to register the IP address or subnet mask number obtained
from your network administrator.
NOTE:
The IP address of the projector is required to change the network settin\
g.
The IP address will not be displayed on the projector’s menu.
Consult your network administrator for the IP...")
![Page 53
. Conven ent Features
L st of Error Messages
Subject /BodyProjector statusMessage
Message subjectAt the time of sending test mail[Projector] Test mail
At the time when error is found[Projector] Projector information
Message body
Test mail
Alert mail configurations are as follows:
Model name:
Serial number:
Sender's address:
SMTP server name:
Recipient's address 1:
Recipient's address 2:
Recipient's address 3:
Lamp replacement
Replace with the new lamp....](http://img.usermanuals.tech/thumb/14/1286/w64_projector-lv7370-1478290321_d-52.png "Page 53
. Conven ent Features
L st of Error Messages
Subject /BodyProjector statusMessage
Message subjectAt the time of sending test mail[Projector] Test mail
At the time when error is found[Projector] Projector information
Message body
Test mail
Alert mail configurations are as follows:
Model name:
Serial number:
Sender's address:
SMTP server name:
Recipient's address 1:
Recipient's address 2:
Recipient's address 3:
Lamp replacement
Replace with the new lamp....")
Network Sett ngs http:// /index.html DHCP ..................................Enabling this option automatically assigns an IP address to the projector from your DHCP ser v- er. Disabling this option allows you to register the IP address or subnet mask number obtained from your network administrator. NOTE: The IP address of the projector is required to change the network settin\ g. The IP address will not be displayed on the projector’s menu. Consult your network administrator for the IP address when [ENABLE] is selected for [DHCP]. IP ADDRESS .......................Set your IP address of the network connected to the projector when [DISABLE] is selected for [DHCP]. SUBNET MASK...................Set your subnet mask number of the network connected to the projector when [DISABLE] is selected for [DHCP]. DEFAULT GATEWAY ...............Set your default gateway of the network connected to the projector when [DISABLE] is se- lected for [DHCP]. DNS (PRIMARY) ................Set your primar y DNS settings of the network connected to the projector. DNS (SECONDARY).................Set your secondar y DNS settings of the network connected to the projector. UPDATE ..............................Reflect your settings. NOTE: Close the browser after clicking [UPDATE]. The projector will automatically update your settings. TIP: Selecting [Network settings] for [Reset] from the projector’s menu allows you to return the following items to the factory default. [DHCP]: DISABLE [IP ADDRESS]: 192.168.0.10 [SUBNET MASK]: 255.255.255.0 [DEFAULT GATEWAY]: 192.168.01 *[DNS(PRIMARY)] and [DNS(SECONDARY)] will remain unchanged. . Conven ent Features
Alert Ma l Sett ng http:// /lanconfig.html This option notifies your computer of an error message via e-mail when using wired LAN. An error message notification will be sent when the projector lamp has reached the end of its usable life or an error occurs in the projector. HOST NAME ............................Type in the hostname of the network connected to the projector. Up to 60 alphanumeric characters can be used. If the host name is unknown, type in a string of characters repre- senting the projector. Example: Projector 1 DOMAIN NAME .......................Type in the domain name of the network connected to the projector. Up to 60 alphanumeric characters can be used. If the domain name is unknown, type in the right side of @ in the sender's address. Example: canon.com ALERT MAIL .............................Checking [ENABLE] will turn on the Aler t Mail feature. Checking [DISABLE] will turn off the Aler t Mail feature. SENDER’S ADDRESS ...............Type in the senders address. Up to 60 alphanumeric and symbols characters can be used. SMTP SERVER NAME ..............Type in the SMTP ser ver name to be connected to the projector. Up to 60 alphanumeric characters can be used. RECIPIENT’S ADDRESS 1 to 3 ...Type in your recipient’s address. Up to 60 alphanumeric and symbols characters can be used. APPLY ......................................Click this button to reflect the above settings EXECUTE ..................................Click this button to send a test mail to check if your settings are correct. STATUS ....................................A reply to a test mail will be displayed. NOTE: • If you execute a test, you may not receive an Alert mail. Should this happen, check if the network settings are correct. • If you entered an incorrect address in a test, you may not receive an Alert mail. Should this happen, check if the Recipient ’s Address is correct TIP: The Alert Mail settings will not be affected even when [Reset] is done from the menu. . Conven ent Features
. Conven ent Features L st of Error Messages Subject /BodyProjector statusMessage Message subjectAt the time of sending test mail[Projector] Test mail At the time when error is found[Projector] Projector information Message body Test mail Alert mail configurations are as follows: Model name: Serial number: Sender's address: SMTP server name: Recipient's address 1: Recipient's address 2: Recipient's address 3: Lamp replacement Replace with the new lamp. [Information] Model name: Serial number: Filter cleaning Please clean filter. [Information] Model name: Serial number: Filter counter: Lamp counter: Lamp cover error The lamp cover is not installed properly. Check and re-attach it if necessary. [Information] Model name: Serial number: Lamp counter: Cooling fan error The cooling fan has stopped. [Information] Model name: Serial number: Lamp counter: Lamp error The lamp will not turn on. [Information] Model name: Serial number: Lamp counter: Temperature error The projector is overheated. [Information] Model name: Serial number: Lamp counter:
❶ Using the Menus NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected. 1. Press the MENU button on the remote control or projector cabinet to display the Menu. 5. Using On-Screen Menu BLANK VOL FREEZE D.ZOOM MENU RD-439E POWER INPUTIMAGE ASPECT INFO. AUTO PC BACK 2. Press the buttons on the remote control or the projector cabinet to display the submenu. 3. Press the OK button on the remote control or the projector cabinet to highlight the top item or the first tab. 4. Use the buttons on the remote control or the projector cabinet to select the item you want to adjust or set. You can use the buttons on the remote control or the projector cabinet to select the tab you want. 5. Press the OK button on the remote control or the projector cabinet to display the submenu window. 6. Adjust the level or turn the selected item on or off by using the buttons on the remote control or the projector cabinet. Changes are stored until adjusted again. 7. Repeat steps 2 -6 to adjust an additional item, or press the BACK button on the remote control or the projector cabinet to quit the menu display. NOTE: When a menu or message is displayed, several lines of information may be lost, depending on the signal or settings. 8. Press the MENU button to close the menu. To return to the previous menu, press the BACK button.
6 . Us ng On-Screen Menu ❷ Menu Elements highlight s lide bar s ource a vailable buttonthermometer symbol Key symbol Menu windows or dialog boxes typically have the following elements: Highlight ................................................Indicates the selected menu or item. Source ...................................................Indicates the currently selected source. Slide bar ................................................Indicates settings or the direction of adjustment. Tab .........................................................Indicates a group of features in a dialog box. Selecting on any tab brings its page to the front. Available buttons ..................................Indicates currently available buttons on the projector cabinet or the remote control. Solid triangle .........................................Indicates fur ther choices are available. A highlighted triangle indicates the item is active. Key symbol ............................................Indicates the Key Lock is enabled. Thermometer symbol ...........................Indicates the lamp is forcibly being cooled down because the internal temperature is too high. High altitude symbol .................................Indicates the [Fan mode] is set to [High altitude] mode. Remaining countdown time ..................Indicates the remaining countdown time when the Off Timer is preset. tab h igh altitude symbol remaining countdown time solid triangle
7 . Us ng On-Screen Menu ❸ List of Menu ItemsSome menu items are not available depending on the input source. * The asterisk (*) indicates that the default setting varies depending on the signal. Menu ItemFactory defaultOptions Input Computer 1* Computer 2 (Digital)* Computer 2 (Analog)* VIDEO* S-VIDEO* Adjustment Image Image mode*1:Standard, 2:Presentation, 3:Cinema, 4:Video, 5:sRGB Detail settings Reference*Standard, Presentation, Cinema, Video, sRGB GammaDynamic, Natural, Black detail Color temperature * 5000K, 6500K, 7300K, 8300K, 9300K, 10500K Brightness R Brightness G Brightness B Contrast R Contrast G Contrast B Brightness Contrast Sharpness Color level Color balance Reset Input signal Clock* Tracking* Horizontal position* Vertical position* Overscan*0[%], 5[%], 10[%] AspectAutoL V - 7 3 7 5 / L V - 7 3 7 0 / L V - 7 2 7 5 : A u t o , 4 : 3 , 1 6 : 9 , 15:9, 16:10, Wide zoom, True size AutoLV-8300: Auto, 4:3, 16:9, 15:9, 16:10, Letterbox, True size D.image shift0(Not available on LV-8300) Video filter*Off, Less, More Setup General Auto keystoneOnOff, On Keystone adjustment Keystone saveOffOff, On Screen colorOffO f f , W h i t e b o a r d , G r e e n b o a r d , G r e e n b o a r d (Gray), Light yellow, Light green, Light blue, Sky blue, Light rose, Pink Lamp modeNormalNormal, Quiet Closed captionOffOff, Caption 1, Caption 2, Caption 3, Caption 4, Text 1, Text 2, Text 3,Text 4 LanguageEnglish English, Deutsch, Français, Italiano, Español, Svenska, 日 本 語 , Dansk, Português, Čeština, Magyar, Polski, Nederlands, Suomi, Norsk, Türkçe, Русский , عربي, Ελληνικά , 中文 , 한국어 Menu Color selectColorColor, Monochrome Display time45 secManual, 5 sec, 15 sec, 45 sec No signal screenBlueBlue, Black, Canon logo Filter message500(H)Off, 100(H), 200(H), 500(H), 1000(H) Installation Image flip H/VNoneNone, Rear, Ceiling mounted, Rear, Ceiling mounted Key lockOffOff, On PasswordOffOff, On Communication speed19200bps4800bps, 9600bps, 19200bps
8 . Us ng On-Screen Menu Setup Options (1) Auto PC adjustmentNormalOff, Normal, Fine Fan modeAutoAuto, High, High altitude Input signal select Computer 1RGB/COMPONENTRGB/COMPONENT, RGB, COMPONENT Computer 2(Analog)RGB/COMPONENTRGB/COMPONENT, RGB, COMPONENT VIDEOAutoA u t o , N T S C 3 . 5 8 , N T S C 4 . 4 3 , P A L , P A L - M , PAL-N, PAL60, SECAM S-VIDEOAutoA u t o , N T S C 3 . 5 8 , N T S C 4 . 4 3 , P A L , P A L - M , PAL-N, PAL60, SECAM WXGA mode LV-7375/LV-7370/LV-7275: Off LV-8300: On Off, On ProgressiveOnOff, On BeepOnOff, On Options (2) Off timerOffOff, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00 Standby modeNormalNormal, Power-saving Direct power on (AC)OffOff, On Direct power on (Comp1)OffOff, On Power managementOffOff, 0:05, 0:10, 0:20, 0:30 Default source selectLastLast, Auto, Computer 1, Computer 2(Digital), Computer 2(Analog), VIDEO, S-VIDEO Information Usage time Remaining lamp time Lamp counter Filter counter Input signal Source index Horizontal frequency Vertical frequency Input signal typeRGB, COMPONENT, VIDEO, S-VIDEO, HDTV Video typeNTSC, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM Sync typeSeparate sync, Composite sync, Sync on green, Sync on video Sync polarity Scan typeInterlace, Progressive Wired LANProjector name MAC address Version Model Serial number Firmware version Data version Reset Current signal All data Network settings Lamp counter Filter counter
9 . Us ng On-Screen Menu 4 Menu Descriptions & Functions [Input] Computer Selects the computer connected to your ANALOG IN-1 input connector. NOTE: • When the component input signal is connected to the ANALOG IN-1 connector, select [Computer 1]. • The projector will determine if the input signal is RGB or component signal. Computer (D g tal & Analog) Selects the computer connected to your DIGITAL IN / ANALOG IN-2 connector. NOTE: When the component input signal is connected to the DIGITAL IN/ANALOG IN-2 connector, select [Computer 2 (Analog)]. VIDEO Selects what is connected to your VIDEO input-audio-video equipment. S-VIDEO Selects what is connected to your S-VIDEO input-audio-video equipment. NOTE: A frame may freeze for a brief period of time when a video is played back in fast-forward or fast-rewind with a Video or S-Video source.
0 . Us ng On-Screen Menu ❺ Menu Descriptions & Functions [Adjustment] [Image] [Image mode] When selecting user adjustable [Image mode], the submenu will be displayed. You can customize each gamma or color. To do so, first select [Image mode] and press the OK button, then pro- ceed using the following steps. [Deta l sett ngs] Select ng Reference Sett ng [Reference] This option allows you to adjust neutral tint for yellow, cyan or magenta. There are five factory presets optimized for various types of images, you can set user adjustable settings. Standard................ Select this to project an image with a similar quality to that of the original image. An image is projected with a high regard for reproduction of white. Presentation .......... Select this to project an image with a similar quality to that of the original image. A bright and high- contrast image is projected. Cinema .................. Select this to project a moving picture. A picture is projected with a high regard for color tone repro- duction. Video ..................... Select this to project a regular picture such as T V program. sRGB ..................... Select this when you want to project an image from an sRGBcompatible digital camera. An image is projected in the display mode conforming to the sRGB Standard. Select ng Gamma Correct on Mode [Gamma] Each mode is recommended for: Dynamic ................Creates a high-contrast picture. Natural ...................Natural reproduction of the picture. Black detail ............Emphasizes detail in dark areas of the picture.
. Us ng On-Screen Menu Adjust ng Color Temperature [Color temperature] This option allows you to select the color temperature of your choice: 5000K, 6500K, 7300K, 8300K, 9300K, 10500K. NOTE: When [Standard] or [Presentation] is selected in [Reference], [Color temperature] is not available. Adjust ng Wh te Balance [Br ghtness RGB/Contrast RGB] This allows you to adjust the white balance. Brightness for each color (RGB) is used to adjust the black level of the screen; Contrast for each color (RGB) to adjust the white level of the screen. Adjust ng Br ghtness, Contrast, Sharpness, Color level and Color balance You can adjust brightness, contrast, sharpness, color level and color balance. Brightness .............Adjusts the brightness level or the black level of the image. Contrast .................Adjusts the intensity of the image according to the incoming signal (Wh\ ite level of the image). Sharpness ..............Controls the detail of the image for Video. Color level ..............Increases or decreases the color saturation level. Color balance ........Varies the color level from +/- green to +/-blue. The red level is used as reference. Input signalBrightnessContrastSharpnessColor levelColor balance Computer (RGB Analog)YesYesYesNoNo Computer (RGB Digital)YesYesYesNoNo ComponentYesYesYesYesYes Video, S-VideoYesYesYesYesYes Yes=Adjustable, No=Not adjustable Reset The settings and adjustments for [Adjustment] will be returned to the factory settings with the exception of the fol- lowing; numbers and [Reference] within the [Image mode] screen. The settings and adjustments under [Detail settings] within the [Image mode] screen that are not currently select- ed will not be reset.