Canon projector LV7297M User Manual
Here you can view all the pages of manual Canon projector LV7297M User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 71
![Page 71
71
Appendix
No image – Check the connection between your computer or video equipment and the projector. See pages 17-19. – See if the input signal is correctly output from your computer. Some laptop computers may need to change the setting for monitor output when connect\
ing to a projector. See your computer’s instruction manual for the setting. – It takes about 30 seconds to display an image after...](http://img.usermanuals.tech/thumb/14/1279/w300_projector-lv7297m-1478289901_d-70.png "Page 71
71
Appendix
No image – Check the connection between your computer or video equipment and the projector. See pages 17-19. – See if the input signal is correctly output from your computer. Some laptop computers may need to change the setting for monitor output when connect\
ing to a projector. See your computer’s instruction manual for the setting. – It takes about 30 seconds to display an image after...")
71 Appendix No image – Check the connection between your computer or video equipment and the projector. See pages 17-19. – See if the input signal is correctly output from your computer. Some laptop computers may need to change the setting for monitor output when connect\ ing to a projector. See your computer’s instruction manual for the setting. – It takes about 30 seconds to display an image after...
Page 72
![Page 72
72
Appendix
The image is distorted or runs off. – Check PC adjust menu or Screen menu and adjust them. See pages 33-34, 38-40.
PIN code dialog box appears – PIN code lock is being set. Enter a PIN code (the “1234” or \
at start-up. numbers you have set). See pages 22, 60-61.
The Remote control unit does – Check the batteries. not work. – Make sure no obstruction is between the projector and remote control. – Make sure you are not too...](http://img.usermanuals.tech/thumb/14/1279/w300_projector-lv7297m-1478289901_d-71.png "Page 72
72
Appendix
The image is distorted or runs off. – Check PC adjust menu or Screen menu and adjust them. See pages 33-34, 38-40.
PIN code dialog box appears – PIN code lock is being set. Enter a PIN code (the “1234” or \
at start-up. numbers you have set). See pages 22, 60-61.
The Remote control unit does – Check the batteries. not work. – Make sure no obstruction is between the projector and remote control. – Make sure you are not too...")
72
Appendix
The image is distorted or runs off. – Check PC adjust menu or Screen menu and adjust them. See pages 33-34, 38-40.
PIN code dialog box appears – PIN code lock is being set. Enter a PIN code (the “1234” or \
at start-up. numbers you have set). See pages 22, 60-61.
The Remote control unit does – Check the batteries. not work. – Make sure no obstruction is between the projector and remote control. – Make sure you are not too...
Page 73
Appendix 73 Appendix Menu Tree Computer Input/HDMI Input/VIDEO Input VolumeMuteOn/OffSound0-63 ANALOG PCCOMPONENT S-VIDEOSCART Input VIDEO COMPUTER HDMI MICOn/OffMIC GAIN0-63STANDBY MIC OUTOn/Off Presentation CinemaBlackboard (Green) User 1 Image selectStandard ColorboardRed/Blue/Yellow/Green User 4 High contrast InformationInput Source Information Display LanguageSetting20 languages provided. Blue/User/BlackOff /On/Countdown offLogo select Standby On/Off Code 1–Code 2 BackgroundDisplayLogo Power...
Page 74
74 Appendix HDMI Input/VIDEO Input Auto1080i1035i720p575p480p575i480i 0–630–63 Off System (2)AutoPALSECAMNTSCNTSC 4.43PAL-MPAL-N System (3) Image AdjustContrastBrightnessColorTint RedGreenBlueSharpness ResetStore Gamma Progressive 0–630–630–630–15 0–15 User 1 Aspect Yes/No OffNoise reductionL1L2 0–630–63 User 4 L2L1 Film Color temp. Scale Reset H/V H/VYes/NoYes/No Custom adj.On/OffH&V MidLowXLow UserHigh PositionCommon Auto iris*Off/On SVGA 1Mode 1Mode 2 - - - - Total dotsHorizontal positionVertical...
Page 75
Appendix 75 Appendix Check the indicators for projector condition. • • • green.• • • red • • • off • • • blinks green. When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. (pp. 62,68) Indicators and Projector Condition • • • blinks red. Indicators Projector ConditionPOWERred/greenWARNING redLAMP REPLACEyellow The projector is off. (The AC...
Page 76
![Page 76
76
Appendix
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with t\
he V-, H-Frequency mentioned below and less than 140 MHz of Dot Clock. When selecting these modes, PC adjustment can be limited.
Note: The specifications are subject to change without notice.
ON-SCREEN DISPLAYRESOLUTIONH-frekv.(KHz)V-frekv.(Hz)SXGA 81280 x 102463.9860.02SXGA 91280 x 102479.97675.025SXGA 101280 x 96060.0060.00SXGA 111152 x 90061.2065.20SXGA 121152 x...](http://img.usermanuals.tech/thumb/14/1279/w300_projector-lv7297m-1478289901_d-75.png "Page 76
76
Appendix
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with t\
he V-, H-Frequency mentioned below and less than 140 MHz of Dot Clock. When selecting these modes, PC adjustment can be limited.
Note: The specifications are subject to change without notice.
ON-SCREEN DISPLAYRESOLUTIONH-frekv.(KHz)V-frekv.(Hz)SXGA 81280 x 102463.9860.02SXGA 91280 x 102479.97675.025SXGA 101280 x 96060.0060.00SXGA 111152 x 90061.2065.20SXGA 121152 x...")
76 Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with t\ he V-, H-Frequency mentioned below and less than 140 MHz of Dot Clock. When selecting these modes, PC adjustment can be limited. Note: The specifications are subject to change without notice. ON-SCREEN DISPLAYRESOLUTIONH-frekv.(KHz)V-frekv.(Hz)SXGA 81280 x 102463.9860.02SXGA 91280 x 102479.97675.025SXGA 101280 x 96060.0060.00SXGA 111152 x 90061.2065.20SXGA 121152 x...
Page 77
![Page 77
Appendix
77
Appendix
Note:
• The specifications are subject to change without notice.• Depending on your PC settings, the digital signals of your PC may not be projected correctly. In such a case, confirm your PC settings.• When you project a DVI signal, connect the cables, turn the projector on, then select the input. Finally, turn on your PC. Be sure to follow this procedure, otherwise an image \
may not be projected on the screen. If an image is not projected correctly, restart your PC.• Do not...](http://img.usermanuals.tech/thumb/14/1279/w300_projector-lv7297m-1478289901_d-76.png "Page 77
Appendix
77
Appendix
Note:
• The specifications are subject to change without notice.• Depending on your PC settings, the digital signals of your PC may not be projected correctly. In such a case, confirm your PC settings.• When you project a DVI signal, connect the cables, turn the projector on, then select the input. Finally, turn on your PC. Be sure to follow this procedure, otherwise an image \
may not be projected on the screen. If an image is not projected correctly, restart your PC.• Do not...")
Appendix 77 Appendix Note: • The specifications are subject to change without notice.• Depending on your PC settings, the digital signals of your PC may not be projected correctly. In such a case, confirm your PC settings.• When you project a DVI signal, connect the cables, turn the projector on, then select the input. Finally, turn on your PC. Be sure to follow this procedure, otherwise an image \ may not be projected on the screen. If an image is not projected correctly, restart your PC.• Do not...
Page 78
78 Appendix Technical Specifications Mechanical Information Projector TypeMulti-media Projector Dimensions (W x H x D) 13.13” x 3.98” x 9.72” (333.5mm x 101.0mm x 247.0mm) (Not including protrusions) Net WeightLV-7292A, LV-7297A, LV-7392A, LV-8227A : 6.6 lbs (2.99 kg)LV-7292M, LV-7297M, LV-8227M : 6.4 lbs (2.9 kg)Foot Adjustment0˚ to 10˚ Panel Resolution LCD Panel SystemLV-7292A, LV-7297A, LV-7292M, LV-7297M, L: 0.55”; LV-7392A: 0.63”; LV-8227A, LV-8227M: 0.59”TFT Active Matrix type, 3 panels Panel...
Page 79
![Page 79
Appendix
79
Appendix
Model No.
COMPONENT-VGA Cable : LV-CA32
S-VIDEO-VGA Cable : LV-CA33
Soft Carrying Case : LV-SC01
Remote controller : LV-RC06
Projector Attachment : LV-CL17
Ceiling Attachment : LV-CL18
High Ceiling Attachment : LV-CL19
Lamp : LV-LP35
The parts listed below are optionally available. When ordering those par\
ts, specify the item name and Model No. to the sales dealer.
Accessories User’s...](http://img.usermanuals.tech/thumb/14/1279/w300_projector-lv7297m-1478289901_d-78.png "Page 79
Appendix
79
Appendix
Model No.
COMPONENT-VGA Cable : LV-CA32
S-VIDEO-VGA Cable : LV-CA33
Soft Carrying Case : LV-SC01
Remote controller : LV-RC06
Projector Attachment : LV-CL17
Ceiling Attachment : LV-CL18
High Ceiling Attachment : LV-CL19
Lamp : LV-LP35
The parts listed below are optionally available. When ordering those par\
ts, specify the item name and Model No. to the sales dealer.
Accessories User’s...")
Appendix
79
Appendix
Model No.
COMPONENT-VGA Cable : LV-CA32
S-VIDEO-VGA Cable : LV-CA33
Soft Carrying Case : LV-SC01
Remote controller : LV-RC06
Projector Attachment : LV-CL17
Ceiling Attachment : LV-CL18
High Ceiling Attachment : LV-CL19
Lamp : LV-LP35
The parts listed below are optionally available. When ordering those par\
ts, specify the item name and Model No. to the sales dealer.
Accessories User’s...
Page 80
80 Appendix This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1. For PJ Link password, see the user’s manual of “Network Set-up and Operation.” PJLink is a registered trademark of JBMIA and pending trademark in some countries. Pj Link Notice (Only for LV-7292A, LV-7297A, LV-7392A, LV-8227A) Attaching...