Canon projector LV7297M User Manual

31
Computer	Input
PC	System	Menu
PC	System	Menu
Computer	System	Selection
This projector automatically tunes to various types of computers with it\
s Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this projector\
 automatically detects the signal format and tunes to project a proper image without any additional\
 settings. (Signal formats provided in this projector are shown on pages 76-77.)
One of the following messages may appear when:
When the projector cannot...

32
Computer	Input
When the image is not stable or flicker, or when the image is not in right position as inputing ANALOG PC signal, press the AUTO SET button on the remote control unit to adjust the Fine	sync, Total	dots, Horizontal	position and Vertical	position	to obtain best display.
PC	adjust	Menu
Auto	PC	Adjustment
Note: •  Refer to page 76 for the Compatible Computer Specifications. • Some signal formats may not be able to display correctly. • Only when input computer signal to the projector, PC...

Computer	Input
33
Computer	Input
PC	adjust	Menu
Manual	PC	Adjustment
Some computers employ special signal formats which may not be tuned by M\
ulti-scan system of this projector.  Manual PC Adjustment enables you to precisely adjust several parameters to match t\
hose signal formats. The projector has 10 independent memory areas to store those parameters \
manually adjusted. It allows you to recall the setting for a specific computer. 
1
2
Use the Point ◄► buttons to adjust the value, eliminating a...

34
Computer	Input
Store
To store the adjusted data, select	Store	and then press the Point ► or the OK button. Move the highlight to one of the Modes 1 to 10 in which you want to store, and then press the OK button.
Mode	free
To clear the stored data, select Mode	free and then press the Point ► or the OK button. Move the highlight to the Mode that you want to clear and then press the OK button.
Reset
To reset the adjusted data, select Reset and press the OK button. A confirmation box appears and then...

Computer	Input
35
Computer	Input
LV-RC0 6
Image	select	Menu
IMAGE	button
Presentation
High	 contrast
User 1
User 2
User 3
Image	Mode	Selection	
User 4
Blackboard(Green)
Standard
Remote	control	unit
IMAGE	button
Select the desired image mode among Presentation, Standard, High	contrast, Cinema, Blackboard	(Green), Colorboard, User 1, User 2, User 3 and  User 4 by pressing the IMAGE button on the remote control unit.
Standard
Picture mode with improved halftone for graphics.
High	contrast
Blackboard...

36
Computer	Input
Image	Adjust	Menu
Image	Adjustment
Reset
Press the MENU button to display the On-Screen Menu.  Use the Point ▲▼ buttons to select Image	adjust and then press the Point ► or the OK button.
1
2Use the Point ▲▼ buttons to select the desired item and then press the OK button to display the adjustment dialog box.  Use the Point ◄► buttons to adjust the setting value.
Note:• When White balance Red, Green or blue is    adjusted, Color	temp. will change to User.• When Blackboard(Green) or...

Computer	Input
37
Computer	Input
Aspect	Setting		(For	LV-7292A,	LV-7297A,	LV-7392A,	LV-7292M,	LV-7297M)
Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Aspect and then press the Point ► or the OK button.
Use the Point ▲▼ buttons to select the desired item and then press the OK button .
This projector has the picture screen resize function, which enables you\
 to customize the image size.
Aspect	Menu
Provide the image to fit the screen size.Normal
TrueProvide the...

38
Computer	Input
Select Digital	zoom	+. The On-Screen Menu disappears and D.	zoom	+ appears. Press the OK button to expand the image size. Use the Point ▲▼◄► buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D.ZOOM + or the OK button on the remote control unit. 
To exit the Digital zoom +/– mode, press any button except the D.ZOOM +/– buttons, OK and Point buttons.
Digital	zoom	+
Select...

Computer	Input
39
Computer	Input
Aspect	Setting		(For	LV-8227A,	LV-8227M)
This projector has the picture screen resize function, which enables you\
 to customize the image size.
Aspect	Menu
Provide the image to fit the screen size.
Normal
TrueProvide the image in its original size. When the original  image size is larger or smaller than the screen size (1280 x 800), the projector enters to the panning  mode  automatically. Use the Point ▲▼◄► buttons to pan the image. When adjusted, the arrows will turn...

40
Computer	InputVIDEO	Input
Select Digital	zoom	+. The On-Screen Menu disappears and D.	zoom	+ appears. Press the OK button to expand the image size. Use the Point ▲▼◄► buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D.ZOOM + or the OK button on the remote control unit. 
To exit the Digital zoom +/- mode, press any button except the D.ZOOM +/- buttons, OK and Point buttons.
Digital	zoom	+...