Canon projector LV7245 User Manual
Have a look at the manual Canon projector LV7245 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
3 NOTE: Composite video standards are as follows: NTSC: U.S. TV standard for video in U.S. and Canada. PAL: TV standard used in Western Europe. PAL-N: TV standard used in Argentine, Paraguay and Uruguay. PAL-M: TV standard used in Brazil. PAL60: TV standard used for NTSC playback on PAL TVs. SECAM: TV standard used in France and Eastern Europe. NTSC4.43: TV standard used in Middle East countries. •You can use the supplied wireless remote control and remote mouse receiver to operate your PC mouse wireless from across the room. The remote mouse receiver supports almost any PC using a USB connection (LV-7245/LV-7240). •You can control the projector with a PC or control system using the PC Control port. •The contemporary cabinet design is light, compact, easy to carry, and complements any office, boardroom or auditorium. About this users manual The fastest way to get started is to take your time and do everything right the first time. Take a few minutes now to review the users manual. This may save you time later on. At the beginning of each section of the manual youll find an overview. If the section doesnt apply, you can skip it. •IBM is a trademark or registered trademark of International Business Machines Corporation. •Mac and PowerBook are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. •Windows, Windows 98, Windows Me, Windows XP or Windows 2000 are trademarks or registered trademarks of Microsoft Corporation. •Other product and company names mentioned in this user’s manual may be the trademarks or registered trademarks of their respective holders. 1. Introduction
4 1. Introduction Part Names of the Projector POWE RV ID E OS-VIDEOCOMPUTER-1COMPUTER-2 WARN INGL A M P R E P L A C E AUTO PC VOL-VOL+ Z O O M FO CUS AC IN VOL-VOL+ ZOOM FOCUS S-VIDEO INMONO MONO VID EO INL AUDIO IN R A NA LO G IN-1A NA LO G IN -2AUDIO OUTL AUDIO IN R SERVICE PO RT A U D IO IN PO W ERVIDEO S-VIDEOCOMPUTER-1 COMPUTER-2 W A R NINGLAM P REPLACE AUTO PC AC IN Zoom Lever (See page 24)Controls (See page 6) Lens Lens Cap Be sure to remove the lens cap during projection. The cap can deform or fire can occur. Built-in Security Slot ( )* Focus Ring (See page 24) Adjustable Tilt Foot Lever (See page 23) Adjustable Tilt Foot (See page 23) Remote sensor (See page 10)Ventilation (inlet) / Filter Cover (See page 47) Do not block this vent. Troubles or fire can result. Ventilation (inlet) Front/Top AC Input Connect the supplied power cord’s two-pin plug here, and plug the other end into an active wall outlet. (See page 19) Main Power Switch When you plug the supplied power cord into an active wall outlet and turn on the Main Power, the POWER indicator turns orange and the projector is in standby mode. (See page 20)Remote sensor (See page 10) Terminal Panel (See page 7) Monaural Speaker (1W) Rear *This security slot supports the MicroSaver ® Security System. MicroSaver ® is a registered trademark of Kensington Microware Inc. The logo is trademarked and owned by Kensington Microware Inc. Ventilation (outlet) Heated air is exhausted from here. Do not block this vent. Troubles or fire can result.
5 1. Introduction For LV-7245/LV-7240 only Attaching the supplied carrying handle You can carry the projector by attaching the supplied carrying handle securely to the projector. To attach the supplied carrying handle, use the supplied flathead screwdriver and two screws. Place a soft cloth on the working surface before turning the projector over to prevent scratching the top cover. Make sure that the carrying handle is attached with correct orientation as shown below. Bottom Adjustable Tilt Foot (See page 23) Adjustable Tilt Foot Lever (See page 23) Adjustable Tilt Foot Lever (See page 23)Lamp Cover (See page 49) CAUTION When carrying the projector by the carrying handle, make sure the two screws that attach the carrying handle to the projector cabinet are tight. Carrying handleScrew Flathead screwdriver
6 1. Introduction Top Features POWERVIDEO S-VIDEOCOMPUTER-1 COMPUTER-2 WARNINGLAMP REPLACE AUTO PC VOL-VOL+ 12 13 10 2 3 4 11 1567 89 1. POWER Button ( ) Use this button to turn the power on and off when the main power is supplied and the projector is in standby mode. To turn on the projector, press and hold this button for a minimum of two seconds. To turn off the projector, press this button twice. 2. POWER Indicator When this indicator is green, the projector is on; when this indicator is orange, it is in standby mode. See the Power Indicator section on page 52 for more details. 3. WARNING Indicator If this light blinks red rapidly, it indicates that an error has occurred, the lamp cover is not attached properly or the projector has overheated. If this light remains orange, it indicates that you have pressed a cabinet key while the Key lock is enabled. See the WARNING Indicator section on page 52 for more details. 4. LAMP REPLACE Indicator If this light blinks red rapidly, its warning you that the lamp has reached the end of its usable life. After this light appears, replace the lamp as soon as possible (See page 49). If this is lit green continually, it indi- cates that the lamp mode is set to Quiet. See the Lamp Indicator section on page 52 for more details. 5. VIDEO Button Press this button to select a video source from a VCR, DVD player, laser disc player or document camera. 6. S-VIDEO Button Press this button to select an S-Video source from a VCR, DVD player, laser disc player or document cam- era.7. COMPUTER-1 and -2 Buttons Press this button to select an RGB source from com- puter or component equipment connected to your ANALOG IN-1 or -2 port. 8. AUTO PC Button Use this button to adjust an RGB source for an opti- mal picture (See page 27). 9. Source Indicators When one of the ANALOG IN-1/-2, VIDEO or S-VIDEO input is selected, the corresponding source indicator lights. 10. MENU Button Displays the menu. 11. SELECT / VOL (+/–) Buttons : Use these buttons to select the menu of the item you wish to adjust. : Use these buttons to change the level of a se- lected menu item. A press of the button ex- ecutes the selection. When no menus appear, these buttons work as a volume control. 12. OK Button Executes your menu selection and activates items selected from the menu. 13. BACK Button Pressing this button will return to the previous menu. While you are in the main menu, pressing this button will close the menu.
7 1. Introduction VIDEO INL AUDIO IN R S-VIDEO IN ANALOG IN-1 ANALOG IN-2 AUDIO OUTL AUDIO IN RSERVICE PORTAUDIO IN MONO MONO 41 325 Terminal Panel Features 1. ANALOG IN-1 and -2 / Component Input Connec- tor (Mini D-Sub 15 Pin) Connect your computer or other analog RGB equip- ment such as IBM compatible or Macintosh comput- ers. Use the supplied RGB cable to connect to your computer. This also serves as a component input con- nector that allows you to connect a component video output of component equipment such as a DVD player. This connector also supports Scart output signal. See page 15 for more details. AUDIO IN Mini Jack (Stereo Mini) This is where you connect the audio output from your computer or DVD player when connected to the COM- PUTER input. A commercially available audio cable is required. 2. MONITOR OUT Connector (Mini D-Sub 15 Pin) You can use this connector to loop your computer image to an external monitor from the RGB input source. This connector outputs RGB signal in standby mode. AUDIO OUT Mini Jack (Stereo Mini) You can use this jack to output sound from the cur- rently selected source (COMPUTER, VIDEO or S- VIDEO). Output sound level can be adjusted in accor- dance with the sound level of the internal speaker. Note that this cannot be used as a headphone jack. (When audio equipment is connected, the projector speaker is disabled.) When a cable mini-plug is inserted into this jack, both the right and left audio signals are not mixed, but sepa- rate.For example, when a cable mini-plug is inserted into the left AUDIO IN jack only, only left sound is output. 3. S-VIDEO IN Connector (Mini DIN 4 Pin) Here is where you connect the S-Video input from an external source like a VCR. NOTE: S-Video provides more vivid color and higher resolution than the traditional composite video format. S-VIDEO AUDIO Input Jacks L/R (RCA) These are your left and right channel audio inputs for stereo sound from an S-Video source. 4. VIDEO IN Connector (RCA) Connect a VCR, DVD player, laser disc player, or docu- ment camera here to project video. VIDEO AUDIO Input Jacks L/R (RCA) These are your left and right channel audio inputs for stereo sound from a Video source. 5. SERVICE PORT (DIN 8 Pin) Use this port to connect a PC or control system to control the projector via an optional RS-232C serial cable (LV-CA34). If you are writing your own program, typical PC control codes are on page 60.
8 1. Introduction Part Names of the Remote Control NOTE: If you are using a Macintosh computer, you can click either the MOUSE R-CLICK or MOUSE L-CLICK button to activate the mouse. 1. Infrared Transmitter Direct the remote control toward the remote sensor on the projector cabinet. 2. POWER Button When the main power is on, you can use this button to turn your projector on. NOTE: To turn on the projector, press and hold the POWER button for a minimum of two seconds. 3. OFF Button You can use this button to turn your projector off. NOTE: To turn off the projector, press the OFF button twice. 4. D. ZOOM (+) (–) Button Use this button to adjust the image size up to 400%. The image is magnified about the center of the screen. See page 29. POWEROFF NO SHOW D.ZOOMPAGE MENU BACK RD-426E R-CLICK L-CLICK VIDEOCOMPUTER-1AUTO PC VOLFREEZE INFO. IMAGE ASPECT 1 2 COMPUTER-2S-VIDEO 1 3 4 76 9 2 8 10 11 13 14 12 20 21 19 16 15 18 5 17 5. NO SHOW Button This button turns off the image and sound for a short period of time. Press again to restore the image and sound. 6. PAGE / Button (Not available on LV-X5) Use these buttons to operate your computer with the supplied remote mouse receiver. See page 30. Yo u can use these buttons to scroll the viewing area of the window or to move to the previous or next slide in PowerPoint on your computer. 7. MENU Button Displays the menu for various settings and adjust- ments. 8. SELECT (Mouse) Button :Use these buttons to select the menu of the item you wish to adjust. :Use these buttons to change the level of a se- lected menu item. A press of the button ex- ecutes the selection. When an image is magnified, the SELECT button moves the image. See page 29. 9. OK Button Use this button to enter your menu selection. It works the same way as the OK button on the cabinet. See page 6. 10. BACK Button It works the same way as the BACK button on the cabinet. See page 6. 11. MOUSE L-CLICK Button (Not available on LV-X5) This button works as the mouse left button when the supplied remote mouse receiver is connected with your computer. See page 30. 12. MOUSE R-CLICK Button (Not available on LV-X5) This button works as the mouse right button when the supplied remote mouse receiver is connected with your computer. See page 30. 13. VIDEO Button Press this button to select a video source from a VCR, DVD player, laser disc player or document camera. 14. S-VIDEO Button Press this button to select an S-Video source from a VCR or DVD player.
9 15. COMPUTER-1/-2 Button Press this button to select COMPUTER-1 or -2 (or Component) input. 16. AUTO PC Button Use this button to adjust an RGB source for an opti- mal picture. See page 27. 17. VOL (+) (–) Button Press (+) to increase the volume and (–) to decrease it. 18. ASPECT Button Press this button once to display the Aspect select menu. Keep pressing will change aspect ratios. See page 38. 19. IMAGE Button Press this button to display the Image adjustment menu to adjust Screen color, Image mode, Brightness, Contrast, Sharpness, Color and Color balance. See pages 36 to 37. POWEROFF NO SHOW D.ZOOMPAGE MENU BACK RD-426E R-CLICK L-CLICK VIDEOCOMPUTER-1AUTO PC VOLFREEZE INFO. IMAGE ASPECT 1 2 COMPUTER-2S-VIDEO 1 3 4 76 9 2 8 10 11 13 14 12 20 21 19 16 15 18 5 17 1. Introduction 20. INFO. Button Provides the information on the current signal and pro- jector settings. See page 45. 21. FREEZE Button This button will freeze a picture. Press again to re- sume motion.
10 1. Introduction 30° 30° 30° 30° Remote Control Precautions •Handle the remote control carefully. •If the remote control gets wet, wipe it dry immediately. •Avoid excessive heat and humidity. •If you will not be using the remote control for a long time, remove the batteries. •Do not place the batteries upside down. •Do not use new and old batteries together, or use different types of batteries together. •Dispose of used batteries according to your local regulations. Operating Range for Wireless Remote Control Battery Installation 1Press firmly and slide the battery cover off.2Remove both old batteries and install new ones (AAA). Ensure that you have the batteries po- larity (+/–) aligned correctly.3Slip the cover back over the bat- teries until it snaps into place. Do not mix different types of batter- ies or new and old batteries. Remote sensor on projector cabinetRemote control 7m/22 feet 7m/22 feet •The infrared signal operates by line-of-sight up to a distance of about 7 m (22 feet) and within a 60-degree angle of the remote sensor on the projector cabinet. •The projector will not respond if there are objects between the remote control and the sensor, or if strong light falls on the sensor. Weak batteries will also prevent the remote control from properly operating the projector.
11 This section describes how to set up your projector and how to connect video and audio sources. 2. Installation and Connections Setting Up the Screen and the Projector Selecting a Location The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is approximately 21 measured diagonally when the projector is roughly 0.73 m (29 inches) from the wall or screen. The largest the image can be is 300 when the projector is about 10 m (393 inches) from the wall or screen. Use the drawing below as a guide.Your projector is simple to set up and use. But before you get started, you must first: zSet up a screen and the projector. xConnect your computer or video equip- ment to the projector. See pages 14 to 18. cConnect the supplied power cord. See page 19. NOTE: Ensure that the power cord and any other cables are disconnected before moving the projector. When moving the projector or when it is not in use, cover the lens with the lens cap.To the wall outlet. 300 240 200180 150 120 100 60 403021 80 Distance (Unit: m/inch) Screen Size (Unit: cm/inch) Screen Size Lens center 609.6(W)457.2(H) / 240(W)180(H) 487.7(W)365.8(H) / 192(W)144(H) 406.4(W)304.8(H) / 160(W)120(H) 365.8(W)274.3(H) / 144(W)108(H) 304.8(W)228.6(H) / 120(W)90(H) 243.8(W)182.9(H) / 96(W)72(H) 203.2(W)152.4(H) / 80(W)60(H) 162.6(W)121.9(H) / 64(W)48(H) 121.9(W)91.4(H) / 48(W)36(H) 81.3(W)61.0(H) / 32(W)24(H) 61.0(W)45.7(H) / 24(W)18(H) 42.7(W)32(H) / 17(W)13(H) 1.0/380.73/ 292.0/782.6/1043.3/1304.0/1575.0/1966.0/2366.6/2628.0/314 10.0/393 1.3/ 51 AC IN
12 2. Installation and Connections Lens Center Throw Angle () Throw Distance (C) Screen center Screen Diagonal Screen Width Screen Height Screen Bottom (B) (D) A C I N Throw Distance and Screen Size The following shows the proper relative positions of the projector and screen. Refer to the table to determine the position of installation. Distance Chart B =Vertical distance between lens center and screen center C = Throw distance D =Vertical distance between lens center and bottom of screen (top of screen for ceiling application) α = Throw angle NOTE: Distances may vary +/-5%. α Wide – Tele degree –– – 9.9 12.0 – 9.8 11.9 – 9.8 11.7 – 9.7 11.6 – 9.6 11.6 – 9.6 11.6 – 9.6 11.6 – 9.6 11.5 – 9.6 11.5 – 9.6 11.5 – 9.5 11.5 – 9.5 11.5 – 9.5 11.5 – 9.5 11.5 – 9.5 11.5 – 9.5 11.4 – 9.5 11.4 – 9.5 inch 13 15 18 24 36 43 48 50 54 60 72 90 108 120 126 144 162 180 Screen Size B C Wide – TeleDDiagonal Width Heightinch –– – 29 28 – 34 34 – 42 46 – 56 70 – 85 84 – 102 93 – 113 98 – 119 105 – 128 117 – 142 141 – 171 176 – 214 212 – 257 236 – 285 247 – 300 283 – 343 319 – 386 354 – 429inch -1 -2 -2 -2 -4 -4 -5 -5 -6 -6 -7 -9 -11 -12 -13 -15 -17 -18 inch 5 6 7 10 14 17 19 20 22 24 29 36 43 48 50 57 65 72 inch 21 25 30 40 60 72 80 84 90 100 120 150 180 200 210 240 270 300inch 17 20 24 32 48 58 64 67 72 80 96 120 144 160 168 192 216 240α Wide – Teledegree –– – 9.9 12.0 – 9.8 11.9 – 9.8 11.7 – 9.7 11.6 – 9.6 11.6 – 9.6 11.6 – 9.6 11.6 – 9.6 11.5 – 9.6 11.5 – 9.6 11.5 – 9.5 11.5 – 9.5 11.5 – 9.5 11.5 – 9.5 11.5 – 9.5 11.5 – 9.5 11.4 – 9.5 11.4 – 9.5 mm 320 381 457 610 914 1097 1219 1280 1372 1524 1829 2286 2743 3048 3200 3658 4115 4572 Screen Size B C Wide – TeleDDiagonal Width Heightmm ––– – 730 720 – 870 870 – 1060 1170 – 1420 1770 – 2150 2130 – 2590 2370 – 2880 2490 – 3020 2670 – 3240 2970 – 3600 3580 – 4330 4480 – 5420 5380 – 6520 5980 – 7240 6280 – 7610 7190 – 8700 8090 – 9790 8990 – 10880mm -30 -40 -50 -60 -90 -110 -120 -130 -140 -160 -190 -230 -280 -310 -330 -370 -420 -470 mm 130 150 180 240 360 440 490 510 550 610 730 910 1090 1210 1270 1460 1640 1820 mm 533 635 762 1016 1524 1829 2032 2134 2286 2540 3048 3810 4572 5080 5334 6096 6858 7620mm 427 508 610 813 1219 1463 1626 1707 1829 2032 2438 3048 3658 4064 4267 4877 5486 6096 NOTE: This projector can be hung from the ceiling (Ceiling mounted) with it turned up side down. When a translucent screen is used, the projector can project an image from behind the screen (Rear). When the projector is hung from the ceiling or projector projects an image from behind the screen, the image must be inverted vertically or horizontally. See page 40. • When hanging the projector from the ceiling, optional brackets (part No. LV-CL10) are required.