Canon projector LV5200 User Manual
Here you can view all the pages of manual Canon projector LV5200 User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
31 VIDEO INPUT SELECTING THE INPUT SOURCE MENU OPERATION DIRECT OPERATION Choose Video by pressing the INPUT button on the Top Control or on the Remote Control Unit. If the projector cannot reproduce a proper video source, select correct input source through the “MENU OPERATION”(see below). Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button to move the red frame pointer to the INPUT Menu icon. Press the POINT DOWN button to move the red arrow pointer to Video and...
Page 32
32 VIDEO INPUT AV SYSTEM MENU (VIDEO OR S-VIDEO) AV SYSTEM MENU (COMPONENT VIDEO) SELECTING THE VIDEO SYSTEM Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the AV SYSTEM Menu icon. Press the POINT DOWN button to move the red arrow pointer to the system that you want to select and then press the SET button. 1 2 If the projector cannot reproduce a proper video image, it is necessary to select a specific broadcast signal format...
Page 33
33 VIDEO INPUT PICTURE IMAGE ADJUSTMENT IMAGE LEVEL SELECT (MENU) Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button to move the red frame pointer to the IMAGE SELECT Menu icon.1 2Press the POINT DOWN button to move the red frame pointer to the level that you want to set and then press the SET button. Move the pointer to the level and press the SET button. The level being selected. IMAGE SELECT MENU Normal picture level preset on this projector. Standard...
Page 34
34 VIDEO INPUT Press the POINT LEFT/RIGHT but- tons to adjust the value. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button(s) to move the red frame pointer to the IMAGE ADJUST Menu icon.1 2Press the POINT DOWN button to move the red frame pointer to the item that you want to adjust and then press the SET button. The level of each item is displayed. Adjust each level by pressing the POINT LEFT/RIGHT button(s). Move the pointer to the item to be selected and then...
Page 35
35 VIDEO INPUT PICTURE SCREEN ADJUSTMENT This projector has the picture screen resize function, which enables you to display the desirable image size. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button(s) to move the red frame pointer to the SCREEN Menu icon. Press the POINT DOWN button and move the red frame pointer to the function that you want to select and then press the SET button. 1 2 NOTE The SCREEN Menu cannot be operated when “720p,” “1035i,” or “1080i”...
Page 36
36 SETTING Ceiling When this function is “On,” the picture is top / bottom and left / right reversed. This function is used to project the image from a ceiling mounted projector. Rear When this function is “On,” the picture is left / right reversed. This function is used to project the image to a rear projection screen. Ceiling function Rear function Keystone This function corrects the distorted image. Select either Store or Reset, and then press the SET button. The keystone dialog box appears....
Page 37
37 SETTING This function turns the Projection Lamp off when this projector detects a signal interruption and is not used for a certain period in order to reduce the power consumption and maintain the Lamp-life. (This projector is shipped with this function ON.) The Power Management function operates to turn the Projection Lamp off when the input signal is interrupted and any button is not pressed over 5 minutes. This function operates as follows; 1. When any input signal is interrupted, “No signal” and...
Page 38
38 APPENDIX LAMP REPLACEMENT LAMP REPLACE When the life of the Projection Lamp of this projector draws to an end, the LAMP REPLACE indicator lights yellow. If this indicator lights yellow, replace the Projection Lamp with a new one promptly. Follow these steps to replace the lamp assembly. LAMP ASSEMBLYHANDLE LAMP COVER ORDER REPLACEMENT LAMP The Replacement Lamp can be ordered through your dealer. When ordering a Projection Lamp, give the following information to the dealer. Model No. of your...
Page 39
39 APPENDIX LAMP REPLACE COUNTER Be sure to reset the Lamp Replace Counter after the Lamp Assembly is replaced. When the Lamp Replace Counter is reset, the LAMP REPLACE Indicator stops lighting. NOTE : Do not reset the Lamp Replace Counter until after the Projection Lamp is replaced. Turn the projector on, press the MENU button and the ON- SCREEN MENU will appear. Press the POINT LEFT/RIGHT button(s) to move the red frame pointer to the SETTING Menu icon (refer to page 36, 37). Press the POINT DOWN...
Page 40
40 APPENDIX OPERATING WIRELESS MOUSE INSTALLATION The Remote Control Unit is not only able to operate this projector but also usable as a wireless mouse for most Personal Computers. The POINT buttons and two CLICK buttons are used for wireless mouse operation. This Wireless Mouse function is available only when PC mouse pointer is displayed on a projected screen. When the ON- SCREEN MENU or any message / dialog box is displayed on the screen instead of PC mouse pointer, this Wireless Mouse function...