Canon projector LE5W WH User Manual
Have a look at the manual Canon projector LE5W WH User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
51 Menu function settings Operations while playing music The selected music will be played. • Press the button to play the next music file. • Press and hold the button for 2 seconds to fast forward. Press the OK button to stop fast forwarding. • Press the button to play the previous music file. • Press and hold the button for 2 seconds to rewind. Press the OK button to stop rewinding. • Press the OK button to play or pause. • Press the BACK button to return to the file list/thumbnail view. Playing videos The following file formats are supported. File extension: AVI, MKV, TS, DAT, VOB, MPG, MPEG, MOV, MP4 * The projector may not be able to play all supported video files. If the peak bit rate of a video file is higher than 10 MBps, lag may occur during video playback. Operations while playing videos The selected video is played. • Press the button to play the next video file. • Press and hold the button for 2 seconds to fast forward. Press the OK button to stop fast forwarding. • Press the button to play the previous video file. • Press and hold the button for 2 seconds to rewind. Press the OK button to stop rewinding. • Press the OK button to play or pause. • Press the BACK button to return to the file list/thumbnail view. Projecting documents The projector comes with a document viewer function that allows you to project Microsoft Office files, Adobe PDF files, and text files. The following file types and formats are supported. Ty p e F o r m a t PDF 1.0 to 1.4 (pdf) Microsoft PowerPoint 97/2000/XP/2003/2007/2010 (ppt, pptx) Microsoft Excel 95/97/2000/XP/2003/2007/2010 (xls, xlsx) Microsoft Word 95/97/2000/XP/2003/2007/2010 (doc, docx) Text Text data (txt)
Menu function settings 52 Limitations when projecting documents The projectors document viewer allows you to project the content of a file with limited functions. Some files may look different from what you see on your computer. When giving a presentation using the projectors document viewer, make sure you check that the content of each page is projected satisfactorily beforehand. Projection may not be possible depending on the file. • The projector only has 1 built-in font and this is used to display text in document viewer. Because text is projected using a different font to the computer, text may extend beyond the lines, or line breaks may appear at unexpected positions. Also, some text may not be displayed correctly. • Some functions supported by the computer may not be supported by the projector. For example, animations, 3D effects, SmartArt, hyperlinks, transparency, gradation displays, WordArt, and graphs may not be displayed correctly. • Compared to the computer, it may take some time to project or skip pages in the file. • Large files may close unexpectedly during projection. • Fonts for the following languages can be projected. English Norwegian German Turkish French Polish Italian Hungarian Spanish Czech Portuguese Danish Swedish Chinese (Simplified) Russian Chinese (Traditional) Dutch Japanese Finnish
53 Menu function settings Operations while projecting documents The selected document will be projected. • Press the OK button to change the display magnification. * To return to normal display from a magnified display, press the OK button until the image returns to its normal size. Operations while projecting normally • Press the or button to project the next page. • Press the or button to project the previous page. • Press the OK button to magnify the display. Operations while projecting a magnified display • Press the / buttons to move the projected area to the left or right. • Press the / buttons to move the projected area up or down. Press when the top of the page is displayed to move to the previous page. Press when the bottom of the page is displayed to move to the next page. • Press the OK button to magnify the display. However, if you press the OK button when the image is at maximum magnification, it returns to a normal display. Normal displayMagnified displayMagnified display OKOK: 8 times
Menu function settings 54 By connecting the projector to a computer with a USB cable and using USB streaming, you can project the computers screen (USB Display) and transfer files from the computer to the projectors internal memory (USB File Transfer). USB Display USB Display is only available for Windows. Check the system requirements (P55). By using a USB cable you can project the computers screen. 1. Connect the USB cable to the projectors mini-B USB jack and the computer (P36). 2. From the home screen, select USB Streaming > USB Display, and then press the OK button. The default screen is displayed, and after a few moments the computer recognizes the projector. 3. When using USB Display for the first time on the computer, you need to install the application EZ USB. * If you have already installed the application, go to Starting EZ USB. 4. Installing EZ USB If the autorun function of your computer is enabled, click Run EZ_USB_Detect.exe from the menu displayed on your computer. If the autorun function of your computer is disabled, click Computer > CD Drive (EZ USB), and then run EZ_USB_Detect.exe. Follow the on-screen instructions to install the application. When installation is complete, reboot your computer. 5. Starting EZ USB Double-click the EZ USB icon on the desktop to start EZ USB and project the computers screen. (At this point, the computer monitors resolution may change.) The EZ USB operation screen is displayed. On the operation screen you can select Mirror which projects the same screen as the computers screen, or Extension which expands and projects the computers screen area. Click the function you want to use. The default is Mirror. To close USB Display, click the Exit button in EZ USB, or press the BACK button on the remote control. Using USB Streaming
55 Menu function settings System requirements WindowsCPU Intel/AMD Dual Core 2 GHz or faster Graphics cardIntel 64 MB VRAM or higher, nVIDIA, AMD graphics card Operating systemWindows XP (Professional) SP3 32/64bit, Windows Vista (Home premium or higher) SP2 32/64bit, Windows 7 (Home premium or higher) SP1 32/64bit Memory 1 GB or higher
Menu function settings 56 USB File Transfer You can transfer files from the computer to the projectors internal memory. You can then display the transferred file in the projectors file browser (P48). 1. Connect the projector to a computer using a USB cable. 2. Press the HOME button to display the home screen. From the home screen, select USB Streaming > USB File Transfer, and then press the OK button. The USB File Transfer screen is displayed, and after a few moments the computer recognizes the projector. 3. Transferring files For Windows: From the start menu, open Computer (My Computer for Windows XP). Open the projectors drive icon, and then copy and paste or drag and drop your files. For Mac: Open the projectors drive icon on the desktop, and then copy and paste or drag and drop your files. 4. Disconnecting When you have finished transferring files, follow the steps below to disconnect the computer from the projector. For Windows: Click the Safely remove hardware icon on the Windows taskbar, and check that the message This device can now be safely removed from the computer. is displayed. Press the BACK or HOME button on the remote control to leave the USB File Transfer screen.
57 Menu function settings For Mac: Drag and drop the projectors icon to the trash. Press the BACK or HOME button on the remote control to leave the USB File Transfer screen. Check that the connection has been disconnected. Do not disconnect the USB cable while the files are being copied, as this could result in loss of data or damage to the projector. The connection does not end if files on the projector are open on the computer. Close all files on the projector, and then disconnect.
Menu function settings 58 The Setup menu allows you to make a variety of settings for the projectors operation. Using the Setup menu 1. Select the Setup menu icon on the home screen, and then press the OK button. 2. The Setup menu opens. See P102 for a list of items that can be adjusted from the Setup menu. 3. Press the / buttons to select the item you want to adjust. After selecting the desired main menu item, press OK button to enter the feature settings submenu. Press the / buttons to adjust the selected item. 4. Press the BACK button to return to the top level menu. 5. To close the Setup menu, press the BACK button on the remote control repeatedly, or press the HOME button. Setup menu configuration The Setup menu is comprised of the following 7 items. • Basic menu • Advanced menu • Videos Settings menu • Photos Settings menu • Music Settings menu • Information menu • Language menu Using the Setup menu
59 Menu function settings Basic menu Locking control buttons during standby Home screen > Setup > Basic > Key Lock This function locks the control panel and remote control buttons during standby to prevent the projector from being turned on accidentally. • To turn on the projector when Key Lock is on, press and hold the INPUT button on the control panel or the AUTO PC button on the remote control until the STATUS LED lights up briefly. You can then turn on the projector by pressing the POWER button on the control panel or the remote control. • If you press any buttons other than the INPUT button on the control panel or the AUTO PC button on the remote control while the keys are locked, the STATUS LED lights up (P88). Adjusting keystone distortion automatically Home screen > Setup > Basic > Auto Keystone This function automatically detects the projectors angle of tilt and adjusts keystone distortion to project the optimum image. • Keystone can be adjusted within ± 40 degrees. (When projecting an input signal with 3D timing, the keystone can only be adjusted within ± 4 degrees.) • Because digital processing is performed when adjusting the image, the image after adjustment may differ from the original image. Also, the screens aspect ratio may change. • If you perform manual keystone adjustment from the OSD, the auto keystone function is disabled until the next time the projector is started. However, you can enable auto keystone again by setting Auto Keystone to Off, and then setting it back to On. OffStart the projector as normal. OnIf you do not release the key lock, you cannot turn on the projector. See the note below for more details.OffAuto Keystone is not performed. OnAuto Keystone is performed.
Menu function settings 60 Basic menu Skipping the POWER button Home screen > Setup > Basic > Direct Power On This function turns on the projector automatically by simply connecting the power cord without having to press the POWER button. • When Key Lock is set to On, Direct Power On is automatically set to Off. Turning the power off automatically when no signals are received and no operations are performed Home screen > Setup > Basic > Auto Power Off This function automatically turns off the projector to save power when no signals are received and no operations are performed for a specified length of time. • About 30 seconds before the projector turns off, a message is displayed warning you that the projector will turn off shortly. While the message is displayed, press the POWER button once to turn off the projector. Pressing any other button removes the message. OffYou need to press the POWER button to turn on the projector. OnConnect the power cord to turn on the projector. DisableAuto Power Off is not performed. 5 min The power turns off automatically after the selected time has passed and no signals have been received and no operations have been performed. 10 min 15 min 20 min 25 min 30 min