Canon projector LE5W WH User Manual
Here you can view all the pages of manual Canon projector LE5W WH User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 81
81 Menu function settings H.Size 3D Invert Adjusting the projection width of the input signal (Analog PC) MENU > H.Size This function allows you to adjust the horizontal width of the screen, making it wider or narrower. Press the / buttons to adjust the values. When you have finished making adjustments, press the MENU button or the BACK button. • This is only available when an analog PC image is being input. • Use this if the image is not projected correctly even after executing the AUTO...
Page 82
Menu function settings 82 Keystone LED Mode Adjusting keystone distortions MENU > Keystone This function allows you to correct keystone distortions. Use this if you cannot correct the distortion using Auto Keystone. Press the / buttons to adjust the values. When you have finished making adjustments, press the MENU button or the BACK button. • Keystone can be adjusted within ± 40 degrees.*1 • If you perform manual keystone adjustment, the auto keystone function is disabled until the next...
Page 83
83 Menu function settings HDMI level range Setup MENU > HDMI level range Select if necessary when projecting movie titles via HDMI input. Select the HDMI level range with the OK button, press the / buttons to select the option, and then press the OK button to confirm your selection. Press the MENU button or the BACK button.MENU > Setup This function allows you to move to the home screens Setup screen from the OSD. Press the OK button to display the home screens Setup screen. • You cannot...
Page 84
Menu function settings 84 Information MENU > Information This function displays the current information such as the input, resolution, and so on.
Page 85
85 Menu function settings This projector supports 3D content display using the DLP Link system. This projector only supports 3D image signals in frame sequential format. Other formats such as the Frame Packing format or the Side-by-Side format are not supported. You need the following items to project and watch 3D content. • 3D content capable device * For example, a computer with graphics board and software capable of outputting 3D images at 120 Hz frame sequential. • 3D content • DLP-Link active...
Page 86
Menu function settings 86 Cautions when viewing 3D content • 3D content should not be viewed by people with a history of photosensitive epilepsy, people with heart conditions, pregnant women, the elderly, people with serious illnesses, or people with a history of epileptic seizures. Viewing 3D content could aggravate their pre-existing conditions. • Do not view 3D content if you are feeling unwell or are tired. In addition, do not view 3D content if you are sleep deprived or inebriated. • If you...
Page 87
87 Appendix Appendix
Page 88
Appendix 88 LED Indicators The LED indicators display the operating status of the projector. Operating statusLED Indicator STATUSPOWER Standby OffRed solid on Wa r m u p O f fBlue blinking Projecting OffBlue solid on Button pressed when Key Lock is on (Except buttons operations in order to release Key Lock.)Red lamp lights for 3 secondsStandby: Red solid on Projecting: Blue solid on Key Lock switched between on and offLights up red for 0.5 secondStandby: Red solid on Projecting: Blue solid on...
Page 89
89 Appendix The projector does not turn on Troubleshooting CauseRemedy The power cord is not properly connected.Make sure that the power cord is properly connected. (P26) The power cord has just been connected.Wait for a few seconds. Power cannot be turned on unit the POWER button lights red. (P26) An internal abnormality has occurred.Is the STATUS LED blinking? If it is blinking, a temperature or fan abnormality has occurred. (P88) In the event of a temperature abnormality, make sure that the...
Page 90
Appendix 90 No image CauseRemedy The cables are not properly connected.Check that the computer and video device are properly connected to the projector. The image is not being output from the video device.Make sure that the video device that is connected is playing back the image. The input signal to be projected is not selected.Select the input signal to be projected by pressing the INPUT button or the input selection button on the remote control. (P20, P21) The format of the image signal is...