Canon projector LE5W WH User Manual

71 Menu function settings
Information menu
Checking the amount of used and free 
space in the SD card
Home screen > Setup > Information > 
Memory/SD Card 
This functions allows you to project the 
information about the amount of used and free 
space in the SD card.
 
•  If no SD card is inserted, this is blank.
Checking the amount of used and free 
space in the USB storage device
Home screen > Setup > Information > 
Memory/USB Drive 
This functions allows you to project the 
information about the amount...

Menu function settings 72
Information menu
Checking the LED lit time
Home screen > Setup > Information > LED 
Time 
This functions displays the information about 
the total amount of time the projectors light 
source LED has been lit.
Checking the firmware version number
Home screen > Setup > Information > 
Firmware Version 
This function allows you to display the 
projectors firmware version number. 

73 Menu function settings
Language menu
Selecting the menu display language
Home screen > Setup > Language 
This function allows you to select the display 
language for the home screen, Setup menu, and 
the OSD.
English
German
French
Italian
Spanish
Portuguese
Swedish
Russian
Dutch
Finnish
Norwegian
Tu r k i s h
Polish
Hungarian
Czech
Danish
Chinese (Simplified) 
Chinese (Traditional) 
Japanese 

Menu function settings 74
Key lock during standby
•  This function locks the control panel and remote control buttons during standby to 
prevent the projector from being turned on accidentally.
•  You can turn the key lock function on or off from the Setup menu.
•  To turn on the projector when Key Lock is on, press and hold the INPUT button on 
the control panel or the AUTO PC button on the remote control until the STATUS 
LED lights up briefly and the key lock is released. (*1) 
You can then turn on...

75 Menu function settings
From the On-Screen Display menu (OSD) you can adjust the image quality and color 
settings for the projected image. 
Menu operations
1. To open the OSD, project an input signal or file, and then press the MENU 
button on the remote control.
If an input signal or file is not being projected, the OSD is not displayed even if 
you press the MENU button.
2. When the OSD is displayed, you can make various settings using the  / / /
 and OK buttons.
3. To close the OSD, press the MENU...

Menu function settings 76
Image Adjustment
Selecting the image mode 
MENU > Image Adjustment > Image Mode 
This function allows you to select the image 
quality to suit the image being projected. 
Press the OK button to confirm your selection, 
and then press the MENU or BACK button.
 
• The default is Standard.
•  The image quality settings like brightness, 
contrast, etc. can only be adjusted in User.
Making your own image quality 
adjustments
MENU > Image Adjustment > Image Mode 
> User
When you...

77 Menu function settings
Image Adjustment
Adjusting the brightness
MENU > Image Adjustment > Brightness 
This function allows you to adjust the 
brightness of the image. 
 
After adjusting all of the image qualities, 
perform Save Settings.
If you do not perform Save Settings, your 
adjustments are reset when you select another 
mode.
Adjusting the color
MENU > Image Adjustment > Color 
This function allows you to adjust the color 
strength. 
 
•  You can adjust this when a Video signal is 
being...

Menu function settings 78
Image Adjustment
Adjusting the sharpness
MENU > Image Adjustment > Sharpness 
This function allows you to adjust the 
sharpness of the image. 
 
•  You can adjust this when a Video signal is 
being input.
•  After adjusting all of the image qualities, 
perform Save Settings.
If you do not perform Save Settings, your 
adjustments are reset when you select 
another mode.
Adjusting the color temperature
MENU > Image Adjustment > Color 
Temperature 
This function allows you to...

79 Menu function settings
Aspect
Selecting the aspect ratio for an image 
MENU > Aspect 
This function allows you to adjust the aspect 
ratio to suit the aspect of the image.  Select the Aspect with the OK button, press 
the  /  buttons to select an option, and then 
press the OK button to confirm your selection.
Press the MENU button or the BACK button.
 
•   The default is Auto.
• Aspect can only be adjusted when PC/
Component, HDMI, or Video is being 
input.
AutoProjects using the aspect ratio 
of the...

Menu function settings 80
Screen Color Phase
Projecting onto a colored wall
MENU > Screen Color 
This function allows you to adjust the color of 
the projected image according to the color of 
the screen or wall being projected on.  
Select the Screen Color with the OK  button, 
press the  /  buttons to select the content, 
and then press the OK  button to confirm your 
selection.
Press the MENU button or the BACK button.
 
• The default is Normal.
•  This can be adjusted when connected to a 
computer....