Canon Pro 1 Manual

127
Playback, Erasing
Fast Forwarding/RewindingzSelect one of the following operations using the  W or  X arrow on 
the omni selector and press the  SET button.
z You may experience frame dropping and audio breakup when 
playing back a movie on a computer with insufficient system 
resources.
z The volume at which movies play back can also be adjusted in 
the Set up menu (p. 49).
If you set [Mute] to [On] in the Set up menu (p. 49), no sound is 
reproduced. However, you can resume the sound and adjust...

128
Editing Movies
You can delete unwanted portions from the first or second half of a 
movie clip.
1Select the movie you wish to edit and press the SET 
button.
zSee  Viewing Movies  (p. 126).
2Select   (Edit) using the  W or 
X  arrow on the omni selector and 
press the SET button.
z The movie editing panel and the movie 
editing bar appear.
3Select an editing method using 
the  S or  T arrow on the omni 
selector.
4Select the range you wish to edit 
using the  W or  X arrow on the 
omni selector....

129
Playback, Erasing
6Select   (Save) using the S or 
T  arrow on the omni selector and 
press the SET button.
z When   is selected, the edited movie 
is not saved and the camera reverts to 
the movie editing panel.
7Select [Overwrite] or [New File] 
using the  W or  X arrow on the 
omni selector and press the SET 
button.
z [Overwrite]: Saves the edited movie 
under the same file name as 
the original movie. The 
original data is deleted.
z [New File]: Saves the edited movie 
under a new file name....

130
Rotating Images in the Display
Images can be rotated 90° and 270° clockwise on the LCD monitor 
(or in the viewfinder).
1Select [Rotate] from the [  
(Play)] menu.
zSee  Selecting Menus and Settings
(p. 44).
2Select an image you want to 
rotate by turning the main dial or 
by using the  W or  X arrow on the 
omni selector and press the SET 
button.
z The image cycles to the next orientation 
(90°  J 270°  J original) each time the 
SET  button is pressed.
3Press the MENU button.zThe Play menu...

131
Playback, Erasing
Attaching Sound Memos to Images
In playback mode (including single image playback, index playback, 
magnified playback and the review immediately after shooting in 
Shooting mode) you can attach sound memos (up to 60 seconds) to 
an image. The sound data is saved in WAVE format.
Playing back the Sound Memos
Select   in step 2 above. Images with sound memos are 
displayed with the   mark (standard display or detailed display).
To stop playback, press the SET button. To restart...

Attaching Sound Memos to Images (continued)
132
Erasing the Sound Memos
Select   in Step 2 on the previous page.
zYou cannot attach sound memos to movies.
z You cannot record or playback sound notes for images that 
already have an incompatible sound file attached. If you attempt 
to record or play such images, the “Incompatible WAVE format” 
message will display. Incompatible sound files can be deleted 
with this camera.
z Sound memos for protected images cannot be erased (p. 137).
z The volume can be...

133
Playback, Erasing
Automated Playback (Slide Show)
Slide show image settings are based on DPOF standards (p. 147).
Starting a Slide Show
All images or a selection of images on a CF card can be displayed 
one-by-one in an automated slide show.
All ImagesPlays all the images on the CF card in order
Slide Show 1 – 3 Plays the images selected for each show in order.
1In the [  (Play)] menu, select [Slide 
Show] and press the SET button.
zSee  Selecting Menus and Settings
(p. 44).
2Press the  S or  T...

Automated Playback (Slide Show) (continued)
134
Selecting Images for Slide Shows
You can mark images for inclusion in slide shows 1-3. Up to 998 
images may be marked per slide show. Images display in the order 
of their selection.
4When the slide show is over, press the MENU button.zThe slide show menu appears again. Press the  MENU button 
again to close the menu.
z Movie images play for the length of time that they were recorded 
regardless of the time set in the slide show settings.
z The power...

135
Playback, Erasing
Index PlaybackzPress the   button to switch to index 
playback (3 images).
z Select an image using the main dial or 
the  W or  X arrow on the omni selector 
and mark or remove marks from images 
using the  S or  T arrow on the omni 
selector.
z The selection number and a check mark 
appears at the bottom of selected 
images.
z After you press the  SET button, you can 
select all the images by selecting [Mark 
all] using  S or  T on the omni selector 
and pressing the  SET button...

Automated Playback (Slide Show) (continued)
136
Adjusting the Play Time and Repeat Settings
You can change the play time for all the images in a show and have 
the show repeat itself continuously.
Play TimeSets the duration that each image in a slide show is displayed. 
The options are any one of 3 – 10 seconds, 15 seconds, 30 
seconds and Manual.
Repeat Sets whether the slide show stops when all the slides have 
been displayed or continues to display until stopped.
1Display the slide show menu.
2Select...