Canon Pro 1 Manual

117
Shooting – Selecting Particular Effects
Settings that can be saved to the  /  mode
• Shooting Mode (P,Tv ,Av  and 
M ) • Functions available in 
P,Tv ,
Av  and  M except for Super 
Macro mode (p. 202)
• Rec. menu settings
• Manual Focus location • Zoom location
1Turn the mode dial to P, Tv, Av or M.
2Set the setting contents you wish to save.
3Select [Save settings] from the 
[  (Rec.)] menu.
z See  Selecting Menus and Settings
(p. 44).
4Select [C1] or [C2] and press the SET button.
z Selects a save...

118
Using the ND Filter
The brightness can be decreased by setting the ND filter on. This 
allows you to select a smaller aperture value and a slower shutter 
speed than usual.
Mode Dial    
1Select [ND Filter] in the [  (Rec.)] menu.zSee  Selecting Menus and Settings  (p. 44).
2Select [On] and press the MENU button.
zND  appears on the display panel and the LCD monitor (or in the 
viewfinder).
z Always use a tripod to prevent camera shake in this mode.
z Standard brightness is decreased to...

119
Shooting – Selecting Particular Effects
Setting the Auto Rotate Function
This camera is equipped with an Intelligent Orientation sensor that 
detects the orientation of an image shot with the camera on end and 
automatically rotates it to the correct viewing orientation in the 
display. You can set this function on/off.
Mode Dial            
1Select [Auto Rotate] in the [  
(Set up)] menu.
zSee  Selecting Menus and Settings
(p. 44).
2Select [On] and press the MENU 
button.
z When this function is...

120
Resetting the File Numbers
You can select the way file numbers are assigned.
OnThe file numbers are reset to the start (100-0001) each time a new CF 
card is inserted. New images recorded on CF cards with existing files 
are assigned the next available number.
Off The file number of the last image to be shot is memorized so that 
images recorded to a new CF card start from the next number.
1In the [  (Set up)] menu, select 
[File No. Reset].
z
See  Selecting Menus and Settings
(p. 44).
2Select [On]...

121
Shooting – Selecting Particular Effects
Folder File CapacityEach folder usually contains up to 100 images.
However, since images shot in Continuous mode or Stitch Assist 
mode are always saved into the same folder, a folder may contain 
more than 100 images. The number of images may also exceed 
100 if a folder contains images copied from a computer or images 
shot with other cameras. Please note, however, that the images in 
folders containing 2001 or more images cannot be replayed in this 
camera.  

122
Displaying Images Individually
You can view the recorded images on the LCD monitor (or in the 
viewfinder).
Playback
1Open the LCD monitor.zThe LCD monitor can be freely opened to 
any position (p. 32).
z You can use the viewfinder for playback 
without opening the LCD monitor.
2Turn the mode lever to  .zThe last recorded image appears (single 
image playback).
z You can switch between the LCD monitor 
and viewfinder by pressing the   button.
z  appears on the display panel.
3Move between images...

123
Playback, Erasing
 Magnifying Images
Images can be magnified up to approximately 10 times while in 
single image playback.
1While in single image playback, 
press the   button or turn the 
zoom ring toward telephoto.
zPress the  W,X ,S  or  T arrow on the 
omni selector to move the magnified area 
around the image.
z To reduce the size of the magnified 
image, press the   button or turn the 
zoom ring toward wide angle.
z You can also magnify images by pressing 
the   button while holding the  SET...

124
 Viewing Nine Images at a Time 
(Index Playback)
Up to nine images can be viewed at once in index playback.
1While in single image playback, 
press the   button.
zNine images appear at once (index 
playback).
2Change the image selection by turning the main dial 
or using the  S,T ,W  or  X arrow on the omni 
selector.
3Press the   button.z Index playback cancels and the display reverts to single image 
playback.
z Press the  INFO. button to show the data for the displayed image 
(p. 34).
Movie
Frame...

125
Playback, Erasing
JUMP Jumping Between Images
The display can be advanced or set back 9 images in either single 
image playback or index playback.
1Press the JUMP button while in single image 
playback (p. 122) or index playback (p. 124).
zThe jump bar appears.
2The displayed image(s) change.
Single Image PlaybackzJump 9 images behind or ahead by 
turning the main dial or using the  W or  X
arrow on the omni selector.
z Display the first or last image by pressing 
the  W or  X arrow on the omni...

126
Viewing Movies
You can play back movies shot in   mode.
1Turn the mode lever to  .
zMovies cannot be viewed in index playback.
2Select a movie by turning the 
main dial or using the  W or  X
arrow on the omni selector.
z A movie displays with the instruction 
 on it.
3Press the SET button.zThe movie playback panel appears.
4Select   (Play) using the  W or 
X  arrow on the omni selector and 
press the SET button.
z The movie images and sound will play.
z You can adjust the volume using the  S
or T...