Canon printer PIXMA SELPHY ES2 User Manual

Introduction to the Supplied Programs
71Printing from a PC
4Select   [Text], click [Add/Edit].
5Type the desired text to print, click  , adjust the position of 
the text, then click   [Print].
6Determine the printer name, paper size, cartridge, layout, and 
copies, then click  .
7Printing completes.
2• Frames can be assigned only when [Postcard size] or [L size] paper is selected.
6• The image will not print correctly if you change the paper size setting.  

72Using the Battery Pack (SELPHY ES2 only)
Using the Battery Pack 
(SELPHY ES2 only)
You can print outdoors or at locations without a 
power outlet by installing Battery Pack NB-ES1L 
(sold separately) into the SELPHY ES2. SELPHY 
ES20, however, does not accept a battery pack.
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when 
used with genuine Canon accessories. Canon shall not be liable 
for any damage to this product and/or accidents such...

73Using the Battery Pack (SELPHY ES2 only)
Installing the Battery Pack
Install the battery pack NB-ES1L (sold separately) to the printer.
1Remove the battery packs terminal 
cover.
2Remove the battery cover lever.
3Install the battery pack in the printer.
1• If the battery terminals are dirty, it results in a poor connection. 
Before recharging or using the 
battery, polish the terminals with 
a slender, soft tipped cotton 
swab.
• When the battery pack is not  used, remove it from the printer 
and be...

74Using the Battery Pack (SELPHY ES2 only)
Charging the Battery Pack
Install the battery pack NB-ES1L and charge it.
• It takes approximately 4 hours to bring a depleted battery pack to a full charge state (based on standard Canon testing criteria).
- We recommend recharging the battery pack in a temperature of 5 - 40 °C (41 - 104 °F).
- The charging time will vary depending on the ambient temperature and charge state.
• If Auto Power Down is set to [On], the printer will automatically turn off when...

75Using the Battery Pack (SELPHY ES2 only)
Checking the Battery Status
If battery power is low, the printers power lamp blinks orange. Check battery status by the icon or 
message displayed in the LCD monitor of the printe r, and recharge the battery pack or change it 
for a fully charged one.
Battery Status
IndicationDescription
There is sufficient battery power.
To use the printer for a long time, ei ther use fully charged batteries or 
charge the battery as soon as possible.
Battery power is low. We...

76Using the Battery Pack (SELPHY ES2 only)
Handling of the Battery Pack
Battery Storage
zRemove the battery pack from the printer when the battery pack is not used, be sure to attach 
the terminal cover.
z Do not carry or store the battery pack with meta l objects with sharp edges, such as paper clips 
and pins. Always put the terminal cover on the batte ry packs terminal when carrying it or before 
storing it.
z When storing a battery pack, you are recommended to  use it in the printer until it is...

77Appendix
Appendix  

78Appendix
Making Printer Settings
You can make various printer settings, such as language or power saving settings.
How to Use the Menu
1Turn the printer on and press  .
2Press   or   to select [Printer Setup] and press  .
3Press   or   to select the item and change the setting value.
4Press .
• The setting value is saved.• The printer setup screen is displayed.
• For the settings of each item, refer to pp. 79 - 81.
3• [Bluetooth] is displayed only when a Bluetooth unit is connected.
4• If you press  ,...

Making Printer Settings
79Appendix
Printer Setup Menu
The default setting is marked as  .
Bluetooth Settings
ItemDescriptionSettings
Auto Rotate By setting the camera, the image can be automatically 
rotated on the LCD monitor. On , Off
Auto Power 
Down The printer automatically tu
rns off if no operation is 
performed for five minutes. On , Off 
Bluetooth Sets the model name and/or security details when using 
Bluetooth. [Bluetooth] is displayed only when a Bluetooth 
unit (sold separately) is...

Making Printer Settings
80Appendix
1Press   to select [Printer Setup].
2Select [Bluetooth] and press  .
• The Bluetooth setting screen is displayed.
3Press   or   to select the items you wish to set and change 
setting values.
4Press .
• The setting is saved and the screen returns to [Printer Setup].
1• For how to use the menu, refer to page 78.
• For how to print using a Bluetooth unit, refer to Printing via Bluetooth (p. 57).