Canon printer PIXMA SELPHY DS700 User Manual

Printer Parts and Their Function
9
„Using the Remote Control
(4)Search Button
Looks up target photos in the memory card 
using the shooting date as the search key.
See “Searching for Photos with the Shooting 
Date— Search” on page 35.
(5) Settings Button
Allows you to set the Paper Size, Paper Type, 
Bordered/Borderless printing, printing with 
the date, etc. See “Specifying the Paper and 
Other Settings” on page 33.
(6) Copies [+][–] Buttons
Specifies the number of copies to print in 
such as the print...

Printer Parts and Their Function
10
note
Setting or Replacing the Battery
Set the battery in the remote control first.
Replace the battery in the remote control when the remote control becomes inoperative or its 
effective range becomes shorter.
The lithium coin cell battery CR2025 is available for this remote control. Purchase the 
commercial battery for replacement.
note
Using the Remote Control
• The remote control may operate improperly if strong light such as sunlight or inverted 
fluorescent light...

Printer Parts and Their Function
11
Menu Screen
The following menu can be selected when a memory card is inserted in the memory 
card slot and the printer and the TV are connected.
You can select the following functions in each menu.
Photo Gallery
View each photo and print.
You can automatically display photos (slide 
show) on the full TV screen.
See “Viewing Each Photo on TV and 
Printing— Photo Gallery” on page 21.Photo Print
Select photos and specify the number of copies 
to print.
See “Specifying the...

Printer Parts and Their Function
12
To o l  B o x  
Displays the following menus.
Nozzle check
Prints a nozzle check pattern to ensure that 
ink is output correctly.
See “Printing the Nozzle Check Pattern” on 
page 56.
Head cleaning
Cleans the print head when nozzles are 
clogged.
See “Print Head Cleaning” on page 57.
Deep cleaning
If print quality does not improve after 
standard head cleaning, use Deep Cleaning.
See “Print Head Deep Cleaning” on page 58.
Head alignment
Align the print head.
See...

Preparation When Using the Printer with the TV
13
Preparation When Using the Printer 
with the TV
Displaying a Photo on TV
This section describes the method to connect the printer to the TV with the attached 
video cable (RCA) and to turn on/off the printer and TV.
„Connecting to TV
1Check the following before connecting the printer to the TV.
• Both the printer and the TV are turned off.
• A battery is installed in the remote control.
See “Using the Remote Control” on page 9.
• Print head and ink tank...

Preparation When Using the Printer with the TV
14
„Turning on TV and the Printer for Displaying the Menu Screen
Follow the procedure below to turn on TV and the printer.
1Connect to TV.
See “Connect TV to the printer.” on page 13.
2Turn on TV and the printer.
(1) Turn on TV.
(2) Press the POWER button.
The POWER lamp flashes while the printer warms 
up and changes to steady (non-flashing) green 
when the printer is ready.
(3) Select the video input mode.
The menu screen appears on the TV screen.
See...

Preparation When Using the Printer with the TV
15
Using a Memory Card
Lets take a look at different types of memory cards and how to insert and remove 
them.
„Memory Cards Supported by this printer
Supported memory cards are as follows:
Important
• This printer supports JPEG (DCF/CIFF/Exif 2.21 or earlier/JFIF), TIFF (Exif compliant), 
and DPOF (Ver. 1.00 compliant).
• Photos stored in a memory card not supported by the digital camera may fail in 
loading or be damaged. For types of memory cards...

Preparation When Using the Printer with the TV
16
„Inserting a Memory Card
Important
Insert only a single type of memory card.
• If you use a Compact Flash (CF) card or Microdrive
Insert it as far as it will go into the slot on the right as shown.
* For xD-Picture Card, use the compliant adapter.
• If you use a SmartMedia card
Insert it into the slot on the upper left until it stops with its end projecting 
as shown.
• If you use a Memory Stick/Memory Stick PRO/Magic Gate Memory Stick
Insert it into the...

Preparation When Using the Printer with the TV
17
„Removing a Memory Card
note
If you use the printer connected to your computer, follow the instructions for removal 
of the memory card from the computer. For the procedure, refer to the on-screen User’s 
Guide.
1Ensure that the Indicator lamp is not flashing, then remove the memory 
card.
Important
Removing the memory card or turning off the printer while the Indicator lamp is 
flashing can damage the data stored in the memory card.
• If you use...

Preparation When Using the Printer with the TV
18
Loading Paper
„Print Media to Avoid
Do not use the following types of paper. Using such paper will not only 
produce unsatisfactory results, but can also cause the printer to jam or 
malfunction.
• Folded, curled or wrinkled paper
• Damp paper
• Paper that is too thin (less than 64 gsm or 17 lb)
• Paper that is too thick* (more than 105 gsm or 28 lb)
* non-Canon branded paper
•Picture postcards
• Postcards with an affixed photo or sticker
„Loading the...