Canon printer PIXMA SELPHY CP800 User Manual

							6
7
8
Printing From USB Flash Memor y
1
Print.
Press	the	p
	button to start printing.
During printing, the paper will pass in and out from the 
back of SELPHY several times. Do not touch the paper 
until printing has finished and the printed sheets collect 
on the print output tray (on the outer lid of the paper 
cassette).
Do not let 19 or more printed sheets collect on the print 
output
 	tray.
To	cancel	printing,	press	the	 v button.




Change the ink cassette.
When	the	color	ink	is	depleted,	open	the	ink	cassette	
compartment cover and move the lock as shown in the 
illustration. The ink cassette will be ejected.
Insert a new ink cassette 
(pp. 8,	10 ).

Never	pull	out	the	paper	cassette,	open	the	ink	cassette	compartment	cover,	or	remove	the	memory	card	
while you can hear the printer’s operation sounds immediately after turning on the printer, or during printing. 
This
	may	cause	the	printer	to	malfunction.
It may take some time before images display if the memory card contains a large number of images.
When the total number of copies for printing is set to 0 and you press the  p button, the currently 
displayed image will print once.
If the [Start DPOF printing] screen displays, refer to “Printing Images Using Digital Camera Specified 
Settings (DPOF Print)”  (p. 28).



Insert the paper.
When	the	paper	is	depleted,	remove	the	paper	cassette	
from SELPHY.
Refill the paper cassette with new paper 
(p. 8),	and	
reinsert the cassette into SELPHY  (p. 10).

Just like images on memory cards, images on commercially available USB flash memory can also be printed. 
Insert a USB flash memory.
Insert a USB flash memory as shown.
All	further	steps	are	the	same	as	those	used	for	printing	
images	from	memory	cards	 (pp. 13 –  14).

Depending on the brand of USB flash memory used, it may be difficult to insert or rem ove, and it may not 
operate	properly.
Refer to the user guide included with your USB flash memory for operating instructions.


COPY  
						

							1
2
3
4
15
Display the menu.
Press	the	k button.
Display the settings screen.
Press	the	
ud buttons to select [Print All Images], then 
press
	the 	o
	button.
Select the number of copies.
Press	the	
ud buttons to set the number of copies.
You can select up to 99 copies per image. If there are 
more than 1000 images on the card, only 999 copies will 
be printed in order of the most recent by shooting date.

Number of sheets 
required Number of copies
Print.
Press	the	
p
	button to start printing.
T
o	cancel	printing,	press	the	 v button.

Printing All Images
You can print all images on a memory card at once.
COPY  
						

							1
Cleaning Up After Printing
After you finish printing, follow the steps below to clean up and store SELPHY.
Turn off SELPHY  (p. 11), then remove the memory card or USB flash memory.
Lower the screen (LCD monitor) completely for storage.
Unplug the power cord from the power outlet and disconnect the adapter plug from SELPHY .
If the compact power adapter is hot, wait until it has cooled down before you store it.
Remove the paper cassette and close the paper cassette compartment cover . Keep the remaining paper 
inside
 	the	cassette	and	store	the	cassette	in	a	dark	place	free	from	dust.
Keep the ink cassette inside SELPHY.
Store SELPHY horizontally, in a dark place free from dust.
When not using SELPHY, make sure to store the printer with the screen (LCD monitor) completely 
lowered.
If dust enters SELPHY and sticks to the paper or color ink, print quality will deteriorate.


When you have more than one ink cassette, keep one inside SELPHY
, and put the other inside the 
original packaging or a bag to protect it from dust, and store it in a dark place.
When storing new paper and ink cassettes, leave them in unopened packages, and keep them in a dark 
place.









Storing the Printed Photos 
When both edges of a print have perforations, you can remove the edges 
by bending them.
Use an oil-based pen to write on prints.
To prevent discoloration, do not store prints in places subject to 
temperatures of over 40 °C (104 °F), humid or dusty places, or in direct 
sunlight.
Avoid the following actions as they may result in color change, color 
fading or color bleeding: Sticking any type of adhesive tape on a print 
surface, allowing print surfaces to come into contact with vinyl or plastic, applying alcohol or other volatile 
solvents to a print surface, or leaving the print surface tightly pressed against other surfaces or objects for 
prolonged

	periods.
If you wish to mount prints in an album, select an album with photo covers made of nylon, polypropylene or 
cellophane.
Color may change over time or depending on storage conditions. Canon assumes no liability for color 
changes.





COPY  
						

							Making Settings
1
2
3
1
Printing a Variety of  Images
You can use various printing features, such as imprinting the shooting date or adjusting the color of an image. 
You do not need to repeat the settings for each image because once the settings are made, they are applied 
for	all	images.
Display the settings screen.
Press	the	 k button.
Press
	the	 ud  buttons to select [Print Settings], then 
press
	the	 o button.

Select the item and change the settings.
Press	the	
ud buttons to select an item.
Press
	the	 l	
r  buttons to change the settings, then press 
the
	 v  button to complete the setting.
Pressing 	the	 v button again will restore the image 
display
	screen.
Refer	to	 pp.	1 8 –  21 for information about each setting.




Print.
Select	an	image	for	printing	 (p. 13) and the number of 
copies
	 (p. 13) ,	then	press	the	
p button to print.
COPY  
						

							Printing With the Date (Date)
Getting the Best Results With Auto Correction (Image Optimize)
Correcting Red Eyes and Printing (Correct Red-Eye)
1
Correct images with red-eye. Off (Default setting) / 	On
Portions other than the eyes may be mistakenly corrected. Set [Correct Red-Eye] to [ On] only when 
printing images with red-eye. 
If SELPHY is turned off or the memory card is removed, the setting will return to [	Off].
Red-eye may not be automatically detected or optimally corrected when faces appear extremely small, 
large, dark or bright in relation to the overall image, with faces turned to the side or diagonally , or faces 
with a portion hidden.
Red-eye correction is not available if [
	2-up],	[	4-up],	[ 8-up], or [	Index]	is	selected	in	[Page	
Layout]	 (p. 19).	
When
	[	Sepia]	or	[ B/W] is selected in [My Colors]  (p. 20), red-eye correction will not be applied.
The level of correction will change depending on the page layout and paper size.







SELPHY will automatically correct the image to 
achieve	optimum	image	quality.
 Off /  On (Default setting)


Some images may not be adjusted correctly.
Turning off SELPHY will return the setting to [	On].	
When	[Page	Layout]	 (p. 19)
	is	set	to	[ Index], [Image Optimize] will not be applied.
The level of correction will change depending on the page layout and paper size.



Turning off SELPHY will return the setting to [	Off].
Since the date printed will be the date the image was recorded by the digital camera, it cannot be 
changed on SELPHY.
You can change the style of the printed date in [Date Format]  (p. 21).
The date will not print if [
	Index],	[  ID	Photo]	or	[ Shuffle] is selected in [Page Layout]  (p. 19).




You can print the shooting date recorded by the 
digital	camera.
 Off (Default setting) / 	On


08/08/2010
COPY  
						

							Selecting a Layout and Printing (Page Layout)
19
You can set the number of images that you want 
to print on one sheet. The number of images that 
you specified (p. 13) will be printed in the selected 
layout.
 1-up(Default setting)Prints one image using a full sheet Index Prints as an index
 2-up Prints two images on one sheet ID Photo Prints ID photos on one sheet
 4-up Prints four images on one sheet  Shuffle  Automatically arranges images in 
a variety of sizes for printing on a 
single sheet 
(p. 20)
 8-up* Prints eight images on one sheet
* Set the layout to [
 8-up] when using Color Ink Cassette/Label Set KC-18IL (8-label sheet)  (p. 2). 
If SELPHY is turned off, the setting will return to [ 1-up].
You can keep the setting even if SELPHY is turned off. To retain the layout, make sure SELPHY is turned 
off, press and hold the  k, 
u , and 
p buttons, then press the 
q button to turn on SELPHY. To disable 
this function so that settings are not saved, repeat the above procedure.
The image position cannot be specified.
Depending on the selected layout, the settings made in [Date]  (p. 18), [Image Optimize]  (p. 18), [Correct 
Red-Eye]  (p. 18), [Borders]  (p. 20), [Smooth Skin]  (p. 21), or [Brightness]  (p. 21) may not be applied. 
If you select [Print All Images]  (p. 15) in [
 Index], you can print all images on a memory card as an 
index print.





	 Printing	an	ID	Photo	(ID	Photo)
Prints two ID photos each in three different sizes for 
a total of six photos on a single sheet, as shown in the picture at the left.
Prints can be made on L size or Postcard size paper  (p. 2) .

Paper Picture	Size
L Size 45 x 35 mm  
(1.8 x 1.4 in.) 40 x 30 mm  
(1.6 x 1.2 in.) 30 x 24 mm  
(1.2 x 0.9 in.)
Postcard Size 60 x 51 mm  
(2.4 x 2.0 in.) 45 x 35 mm  
(1.8 x 1.4 in.) 40 x 30 mm  
(1.6 x 1.2 in.)
The ID photo may not be accepted officially, depending on the institution the ID photo is required for. Please 
contact the appropriate institution for details.
COPY  
						

							Printing With or Without a Border (Borders)
Changing the Color Tone and Printing (My Colors)
0
You can set images to print with or without a border. Borderless (Default setting) / 	Bordered

You can adjust the colors in your images, or make your images sepia-toned or black and white.
	Off	(Default setting)—	Positive	FilmIntense,	natural	colors	like	those	
obtained with positive film
 Vivid Emphasizes	the	contrast	and	color	
saturation	for	a	vivid	impression	Sepia
Changes	the	image	to	sepia	tone
	NeutralTones down the contrast and color 
saturation
	for	neutral	hues B/W Black and white
Turning off SELPHY will return the setting to [	Off].
Depending	on	the	settings	made	in	My	Colors,	[Correct	Red-Eye]	 (p. 18)	settings may not be 
applied.



 
Arranging Images of Different Sizes (Shuffle)
Shuffle automatically arranges images in a variety of 
sizes 	for 	printing.
A group of up to 8 images, or a group of up to 20 
images can be printed on a single sheet.
Prints can be made on L size or Postcard size paper  (p. 2) .
I

n 	“Making 	Settings” 	(p. 17) ,	 p
ress 	the 	
ud  buttons 
t
o 	select 	[Page 	Layout] 	in 	the 	screen 	in 	Step 	2. 	
Press 	the 	
l 	
r  buttons to select [Shuffle], then 
p

ress 	the 	
o  button.  
When the screen shown on the left appears, press 
t
 he 	
ud  buttons to select an option.
P
ress 	the 	
l 	
r  buttons to change the settings, then 
p
ress 	the 	
v  button to complete the setting.
P
ressing 	the 	
v  button twice will restore the image 
d
isplay	 screen.







Turning off SELPHY will return the setting to [	Borderless].
If	you	select	[ 8-up] when printing on card sized paper  (p. 2), images will be printed without borders, 
even
	if	[	Bordered]	is	selected	in	[Page	Layout]	 (p. 19).


The image position cannot be specified.
If you select [20] in [Max. Images], it may take some time before images start printing.


COPY  
						

							Adjusting the Brightness (Brightness)
Changing the Date Format (Date Format)
Making Skin Look Smooth in Prints (Smooth Skin)
1
You can adjust the brightness of an image within a 
range 	of 	±3.
The larger the + value, the brighter the image gets. 
T
 he 	larger 	the 	- 	value, 	the 	darker	 the	image 	gets.


Turning off SELPHY will return the setting to [0].
[Brightness] is not available if [	Index]	is	selected	in	[Page	Layout]	 (p. 19).


The setting will be retained even if SELPHY is turned off or the memory card is removed from the slot.
You can change the order of the printed date 
	
(p. 18) .
mm/dd/yy (Default Setting), dd/mm/yy, yy/mm/dd

Makes skin look smooth and beautiful in prints. Off (Default setting) / 	On	
When printing is finished, turning off SELPHY and removing the memory card will return the setting to  	
[	Off].
Correction may be applied to areas other than skin, producing unexpected results.
When
	[Page	Layout]	 (p. 19)	is	set	to	[ Index], [Smooth Skin] will not be applied.





2010/08/0808/08/2010
COPY  
						

							System Requirements

Printing From Your Computer
If you connect your computer to SELPHY and use the supplied software, you can view all images at once and 
take advantage of various printing functions that cannot be done with just SELPHY alone. Following the audio 
guidance will allow inexperienced computer users to print easily.
WindowsMacintosh
OS Windows 7
Windows Vista Service Pack 1, 	
Service

	Pack	2
Windows XP Service Pack 3 Mac OS X v10.4 – v10.6
Configuration The above OS should be pre-installed on computers with built-in USB ports.
CPU Pentium 1.3 GHz or higher  PowerPC G4/G5 or Intel Processor
RAM Windows 7 (64 bit): 2 GB or more
Windows 7 (32 bit), Vista (64 bit, 32 bit): 1 GB 
or

	more
Windows XP: 512 MB or more Mac OS X v10.4 – v10.5: 512 MB or more
Mac OS X v10.6: 1 GB or more
Interface USB
Free

	Hard	Disk	
Space 120
 	MB	or	more*
140	MB	or	more
Display 1,024 x 768 pixels or more 1,024 x 768 pixels or more
*

  For Windows XP, Microsoft .NET Framework 2.0 (max. 280 MB) must be installed. Installation may take some time 
depending on your computer’s capabilities. 
Select favorite images from the index and print
You can select images you wish to print from an index, and print them all at 
once.
Print with decorations
You can add frames or stamps to your images and print. You can also add 
text	to	your	images	and	print.
Print calendars
You can add calendars to your prints.
COPY  
						

							1
2
3
Install the software.
Windows
Place	the	CD-ROM	in	the	computer’s	CD-ROM	drive	
and click [Easy Installation] when the screen on the left 
appears.
Follow the on-screen instructions to proceed.
 If the User 

Account Control window appears, follow the 
on-screen	instructions	to	proceed.



Prepare SELPHY.
Turn off SELPHY and remove the memory card or USB 
flash memory.
Insert 	an	ink	cassette	and	a	paper	cassette	that	contains	
paper into SELPHY  (pp. 8 – 10).

Proceed with the installation to display the screen on the 
left.	
Macintosh
Place	the	CD-ROM	in	the	computer’s	CD-ROM	drive	and	
double-click .
When	the	screen	on	the	left	appears,	click	[Install]	and	
follow the onscreen instructions to proceed.
When the installation finishes, click [Finish] to restart the 
computer
 	and	complete	the	installation.



Installing and Starting the Software
Windows Vista and Mac OS X 10.5 are used for these explanations.
Items to Prepare 
Computer
Supplied CD-ROM (COMPACT PHOTO PRINTER Solution Disk) (p. 2)	
A commercially available USB Cable shorter than 2.5 m (8.2 ft.) (SELPHY terminal requires a Type B 
connector).


COPY