Canon printer PIXMA SELPHY CP800 User Manual

							Inserting the Ink and Paper Cassettes
Connecting SELPHY
1
2
3
1
2
10
Open the covers.
Open	the	covers	for	the	ink	cassette	and	paper	cassette	
compartments.
Insert the ink cassette.
Insert	the	ink	cassette	into	the	printer	in	the	direction	
indicated by the arrow on the cassette until it clicks and 
locks	into	place.
Close	the	ink	cassette	compartment	cover.

Insert the paper cassette.
Make	sure	that	the	outer	lid	is	open	 (p. 8)	and	insert	the	
paper cassette all the way into the compartment.
Plug the adapter cord into SELPHY.
Fully insert the adapter plug into SELPHY.
Connect the power cord.
Connect the power cord to the compact power adapter, 
then plug the other end into a power outlet.
COPY  
						

							1
3
2
4
5
11
Turn on SELPHY.
Press	and	hold	the	q button until the screen shown at 
the
	left	displays.
To turn the power off, press and hold the  q button again 
until

	the	displayed	screen	changes	or	turns	off.


Display the settings screen.
Press	the	 k button.
Press
	the	 ud  buttons to select [Printer Setup], then 
press
	the	 o button.

Display the language settings screen.
Press	the	
ud buttons to select [Language].
Press
	the	 o button.

Select a language.
Press	the	
udl	
r  buttons to select a language, then 
press
	the	 o button.
Pressing
	the	 v button twice will restore the screen in 
Step
	1.


Setting the Display Language
You can change the language displayed in the LCD monitor menus and messages.
Adjust the screen for ease of viewing.
Raise the LCD monitor and adjust until the screen is 
easily visible.
Do not raise the LCD monitor more than 45° as this may 
result
 	in	damage	or	malfunction.


Approx. 45°
COPY  
						

							About USB Flash Memor y
1
Compatible Memor y Cards and Memor y Card Slots
Card SlotsMemory Cards That Can be 
Used Without an Adapter Memory Cards That Require an Adapter 
(commercially available)
SD/MMC +
SD	Memory	Card
SDHC	Memory	Card
SDXC	Memory	Card		
	
MultiMediaCard
MMCplus
 	Card
HC	MMCplus	Card





miniSD	Memory 	Card
miniSDHC 	Memory 	Card 			
microSD 	Memory 	Card
microSDHC 	Memory 	Card
microSDXC 	Memory 	Card
RS-MMC 	Card 	*
1
MMCmobile Card
MMCmicro 	Card








CF/microdrive
CF (CompactFlash) Card
Microdrive


xD-Picture	Card*2
MS/MS Duo
Memory	Stick
Memory	Stick	PRO
Memory	Stick	Duo
Memory	Stick	PRO	Duo




Memory	Stick	micro

*
1 “RS-MMC” is an abbreviation of “Reduced-Size MultiMediaCard”.
*2	Purchase	the	CompactFlash	Card	 Adapter	for	xD-Picture	Card.
For memory cards that require an adapter, be sure to first insert the memory card into the adapter before 
inserting	into	the	appropriate	card	slot.	 	
If you insert the memory card into a card slot without using an adapter , you may not be able to remove 
the
 	memory	card	from	the	printer.
Use	a	memory	card	formatted	in	the	device	used	for	taking	the	images.	 A	memory	card	formatted	on	a	
computer may not be recognized.


Refer to the user guide included with your memory card and adapter for handling instructions.
You can print images on a commercially available USB flash memory by connecting it to SELPHY 
(p. 14).



Images That Can Be Printed
JPEG images conforming to the Exif standard can be printed with SELPHY .
Irregularly sized images, or images that have been edited on a computer may not disp lay or print properly.
COPY  
						

							3
4
5
1
2
13
Insert a single memory card into the slot.
Insert	a	memory	card	fully	into	the	appropriate	slot.
The screen in Step 4 below (image display screen) (p. 7)	
will display.

Select an image.
Press	the	 l
	r
 buttons to select an image to print. 
If
	you	press	and	hold	one	of	the	 l	
r  buttons, the display 
jumps by 5 images. 

Select the number of copies.
Press	the	 ud buttons to select the number of copies.
If
	you	press	and	hold	one	of	the	 ud buttons, the number 
increases or decreases by 5 copies.
You can select up to 99 copies per image.
To print another image, repeat Steps 4 and 5.


Number of copies 
for	the	displayed	
image Total number 
of images to be 
printed
Label side
Selecting and Printing Images
You can select an image and specify the number of copies for printing. In this section, an SD memory card 
will be used as an example, but you can print from other memory cards using the same steps.
Turn on SELPHY.
Press	and	hold	the	
q button until the screen shown at 
the
	left	displays.
To turn the power off, press and hold the  q button again 
until

	the	displayed	screen	changes	or	turns	off.


Adjust the screen for ease of viewing.
Raise the LCD monitor and adjust until the screen is 
easily visible.
Do not raise the LCD monitor more than 45° as this may 
result
 	in	damage	or	malfunction.


Approx. 45°
COPY  
						

							6
7
8
Printing From USB Flash Memor y
1
Print.
Press	the	p
	button to start printing.
During printing, the paper will pass in and out from the 
back of SELPHY several times. Do not touch the paper 
until printing has finished and the printed sheets collect 
on the print output tray (on the outer lid of the paper 
cassette).
Do not let 19 or more printed sheets collect on the print 
output
 	tray.
To	cancel	printing,	press	the	 v button.




Change the ink cassette.
When	the	color	ink	is	depleted,	open	the	ink	cassette	
compartment cover and move the lock as shown in the 
illustration. The ink cassette will be ejected.
Insert a new ink cassette 
(pp. 8,	10 ).

Never	pull	out	the	paper	cassette,	open	the	ink	cassette	compartment	cover,	or	remove	the	memory	card	
while you can hear the printer’s operation sounds immediately after turning on the printer, or during printing. 
This
	may	cause	the	printer	to	malfunction.
It may take some time before images display if the memory card contains a large number of images.
When the total number of copies for printing is set to 0 and you press the  p button, the currently 
displayed image will print once.
If the [Start DPOF printing] screen displays, refer to “Printing Images Using Digital Camera Specified 
Settings (DPOF Print)”  (p. 28).



Insert the paper.
When	the	paper	is	depleted,	remove	the	paper	cassette	
from SELPHY.
Refill the paper cassette with new paper 
(p. 8),	and	
reinsert the cassette into SELPHY  (p. 10).

Just like images on memory cards, images on commercially available USB flash memory can also be printed. 
Insert a USB flash memory.
Insert a USB flash memory as shown.
All	further	steps	are	the	same	as	those	used	for	printing	
images	from	memory	cards	 (pp. 13 –  14).

Depending on the brand of USB flash memory used, it may be difficult to insert or rem ove, and it may not 
operate	properly.
Refer to the user guide included with your USB flash memory for operating instructions.


COPY  
						

							1
2
3
4
15
Display the menu.
Press	the	k button.
Display the settings screen.
Press	the	
ud buttons to select [Print All Images], then 
press
	the 	o
	button.
Select the number of copies.
Press	the	
ud buttons to set the number of copies.
You can select up to 99 copies per image. If there are 
more than 1000 images on the card, only 999 copies will 
be printed in order of the most recent by shooting date.

Number of sheets 
required Number of copies
Print.
Press	the	
p
	button to start printing.
T
o	cancel	printing,	press	the	 v button.

Printing All Images
You can print all images on a memory card at once.
COPY  
						

							1
Cleaning Up After Printing
After you finish printing, follow the steps below to clean up and store SELPHY.
Turn off SELPHY  (p. 11), then remove the memory card or USB flash memory.
Lower the screen (LCD monitor) completely for storage.
Unplug the power cord from the power outlet and disconnect the adapter plug from SELPHY .
If the compact power adapter is hot, wait until it has cooled down before you store it.
Remove the paper cassette and close the paper cassette compartment cover . Keep the remaining paper 
inside
 	the	cassette	and	store	the	cassette	in	a	dark	place	free	from	dust.
Keep the ink cassette inside SELPHY.
Store SELPHY horizontally, in a dark place free from dust.
When not using SELPHY, make sure to store the printer with the screen (LCD monitor) completely 
lowered.
If dust enters SELPHY and sticks to the paper or color ink, print quality will deteriorate.


When you have more than one ink cassette, keep one inside SELPHY
, and put the other inside the 
original packaging or a bag to protect it from dust, and store it in a dark place.
When storing new paper and ink cassettes, leave them in unopened packages, and keep them in a dark 
place.









Storing the Printed Photos 
When both edges of a print have perforations, you can remove the edges 
by bending them.
Use an oil-based pen to write on prints.
To prevent discoloration, do not store prints in places subject to 
temperatures of over 40 °C (104 °F), humid or dusty places, or in direct 
sunlight.
Avoid the following actions as they may result in color change, color 
fading or color bleeding: Sticking any type of adhesive tape on a print 
surface, allowing print surfaces to come into contact with vinyl or plastic, applying alcohol or other volatile 
solvents to a print surface, or leaving the print surface tightly pressed against other surfaces or objects for 
prolonged

	periods.
If you wish to mount prints in an album, select an album with photo covers made of nylon, polypropylene or 
cellophane.
Color may change over time or depending on storage conditions. Canon assumes no liability for color 
changes.





COPY  
						

							Making Settings
1
2
3
1
Printing a Variety of  Images
You can use various printing features, such as imprinting the shooting date or adjusting the color of an image. 
You do not need to repeat the settings for each image because once the settings are made, they are applied 
for	all	images.
Display the settings screen.
Press	the	 k button.
Press
	the	 ud  buttons to select [Print Settings], then 
press
	the	 o button.

Select the item and change the settings.
Press	the	
ud buttons to select an item.
Press
	the	 l	
r  buttons to change the settings, then press 
the
	 v  button to complete the setting.
Pressing 	the	 v button again will restore the image 
display
	screen.
Refer	to	 pp.	1 8 –  21 for information about each setting.




Print.
Select	an	image	for	printing	 (p. 13) and the number of 
copies
	 (p. 13) ,	then	press	the	
p button to print.
COPY  
						

							Printing With the Date (Date)
Getting the Best Results With Auto Correction (Image Optimize)
Correcting Red Eyes and Printing (Correct Red-Eye)
1
Correct images with red-eye. Off (Default setting) / 	On
Portions other than the eyes may be mistakenly corrected. Set [Correct Red-Eye] to [ On] only when 
printing images with red-eye. 
If SELPHY is turned off or the memory card is removed, the setting will return to [	Off].
Red-eye may not be automatically detected or optimally corrected when faces appear extremely small, 
large, dark or bright in relation to the overall image, with faces turned to the side or diagonally , or faces 
with a portion hidden.
Red-eye correction is not available if [
	2-up],	[	4-up],	[ 8-up], or [	Index]	is	selected	in	[Page	
Layout]	 (p. 19).	
When
	[	Sepia]	or	[ B/W] is selected in [My Colors]  (p. 20), red-eye correction will not be applied.
The level of correction will change depending on the page layout and paper size.







SELPHY will automatically correct the image to 
achieve	optimum	image	quality.
 Off /  On (Default setting)


Some images may not be adjusted correctly.
Turning off SELPHY will return the setting to [	On].	
When	[Page	Layout]	 (p. 19)
	is	set	to	[ Index], [Image Optimize] will not be applied.
The level of correction will change depending on the page layout and paper size.



Turning off SELPHY will return the setting to [	Off].
Since the date printed will be the date the image was recorded by the digital camera, it cannot be 
changed on SELPHY.
You can change the style of the printed date in [Date Format]  (p. 21).
The date will not print if [
	Index],	[  ID	Photo]	or	[ Shuffle] is selected in [Page Layout]  (p. 19).




You can print the shooting date recorded by the 
digital	camera.
 Off (Default setting) / 	On


08/08/2010
COPY  
						

							Selecting a Layout and Printing (Page Layout)
1
You can set the number of images that you want 
to print on one sheet. The number of images that 
you specified (p. 13) will be printed in the selected 
layout.
	1-up(Default setting)Prints	one	image	using	a	full	sheet	Index Prints	as	an	index
	2-up Prints two images on one sheet	ID	Photo Prints	ID	photos	on	one	sheet
	4-up Prints	four	images	on	one	sheet 
Shuffle  Automatically 	arranges	images	in	
a	variety	of	sizes	for	printing	on	a	
single	sheet	 (p. 20)
 8-up* Prints	eight	images	on	one	sheet
*	Set	the	layout	to	[
 8-up] when using Color Ink Cassette/Label Set KC-18IL (8-label sheet)  (p. 2).	
The settings will be retained even if SELPHY is turned off or the memory card is removed from the slot.
The image position cannot be specified.
Depending
	on	the	selected	layout,	the	settings	made	in	[Date]	 (p. 18),	[Image	Optimize]	 (p. 18),	[Correct	
Red-Eye]
	 (p. 18) ,	[Borders]	 (p. 20),	[Smooth	Skin]	 (p. 21),	or	[Brightness]	 (p. 21) may not be applied. 
If
	you	select	[Print	 All	Images]	(p. 15)
	in	[	Index],	you	can	print	all	images	on	a	memory	card	as	an	
index	print.




 
Printing an ID Photo (ID Photo)
Prints two ID photos each in three different sizes for 
a total of six photos on a single sheet, as shown in t he 	picture 	at 	the 	left.
Prints can be made on L size or Postcard size paper  (p. 2) .

Paper Picture Size
L 	
Size 45 x 35 mm 	
(1.8 x 1.4 in.) 40
 	x	30	mm	
	
(1.6 x 1.2 in.) 30 	x	24	mm	
	
(1.2 x 0.9 in.)
Postcard
	Size 60 x 51 mm 	
(2.4 x 2.0 in.) 45 x 35 mm 	
(1.8 x 1.4 in.) 40
 	x	30	mm	
	
(1.6 x 1.2 in.)
The ID photo may not be accepted officially, depending on the institution the ID photo is required for. Please 
contact	the	appropriate	institution	for	details.
COPY