Canon printer PIXMA Pro9500 Mark II User Manual


61 2 3 45
16
15
Windows Macintosh
To register later, click Cancel. User registration can be started from the Canon Solution Menu
 icon. For details, refer to 
"Solution Menu" on page 31.
•
Click Next.
If connected to the Internet, the user registration page appears. Follow\
 the on-screen instructions to register your 
printer. You will need your product serial number, which is located on the inside of the printer.
Internet connection is required. (Connection fees apply.)
•
It may take...

0
5
1718
WindowsMacintosh
Click Exit.
If Restart  is displayed, make sure that the  Restart the system now (recommended)  check 
box is selected, then click  Restart.
When the Extended Survey Program screen appears, confirm the 
message.
If you can agree, click Agree. If you click Do not agree, the Extended Survey 
Program will not be installed.  
(This has no effect on the printer's functionality.) After restarting the computer, remove the Setup CD-ROM and keep it in a safe place.
Next, read...


61 2 3 45
3
2
1
5
Windows Macintosh
Connect the printer to the computer with a USB cable.
Make sure the printer is turned on.
Double-click the  Setup icon.
Turn on the computer, then insert 
the Setup CD-ROM into the CD-
ROM drive.
If the CD-ROM folder does not open automatically, 
double-click the  CANON_IJ icon on the desktop.
The USB port is located on the right side of the printer.
• 


5
6
4 5
WindowsMacintosh
Click Easy Install.
Drivers, application software, and on-screen manuals are installed 
automatically.
Click Install.
If you want to select particular items to install, click  Custom Install and 
follow the on-screen instructions to proceed with the installation.
•
Enter your administrator name and password.  
Click OK.
If you do not know your administrator name or password, 
click Help, then follow the on-screen instructions.
Move the cursor over items to display...


61 2 3 45
8
7 9
WindowsMacintosh
Click Restart.
When the Start Setup screen appears, click 
Execute.
Read the License Agreement screen carefully 
and click Yes.
Installation starts.
During installation, follow any on-screen instructions to 
install the software.
•
The Print Head Alignment
 screen appears after the 
computer has been restarted. 


5
1011
A
B
Windows Macintosh
Align the Print Head
Click Execute.
When the Print Head Alignment  screen appears, load two sheets of A4 or Letter-sized plain 
paper in the Rear Tray (A) as shown.
For details, refer to "6 Loading Paper" on page 28.
•
Pinch and slide the Paper Guide (B) against the left edge of the paper\
. 


61 2 3 45
13
12
D
CE
Windows
Macintosh
When this screen appears, click  OK.
Printing of the pattern starts.
Wait until the pattern printing ends (about 10 minutes), and go to 
the next step.
•
If you align the Print Head automatically again, patterns different from those shown above may be 
printed.
•
Make sure that the pattern shown is printed.
Some parts of patterns printed on the first page are faint.
When Print Head Alignment cannot be executed properly, the Alarm lamp (E) will flash...


5
1415
WindowsMacintosh
Click Next.
If connected to the Internet, the user registration page appears. Follow\
 the on-screen instructions to register 
your printer. You will need your product serial number, which is located on the inside of the printer.
To register later, click Cancel. User registration can be started from the Solution Menu icon. For details, refer to 
"Solution Menu" on page 31.
• Internet connection is required. (Connection fees apply.)
•
Click Next.
If you are...


61 2 3 45
17
16
Windows Macintosh
Click Exit.
Remove the Setup CD-ROM and keep it in a safe place.
Next, read "6 Loading Paper" on page 28!
When the Extended Survey Program screen appears, confirm the 
message.
If you can agree, click Agree. If you click Do not agree, the Extended Survey 
Program will not be installed.  
(This has no effect on the printer's functionality.)
The screen does not appear on Mac OS X v.10.3.9.
• 


6
1
C
AB
2 3
ED
Loading Paper
Open the Paper Support (C).
This section explains how to 
load paper in the Rear Tray (A).
Open the Feed Slot Cover 
(D), then pinch and slide 
the Paper Guide (E).
Pull out the Front Tray Extension 
(B) beforehand.
•
Load paper straight along the 
right edge of the Rear Tray.
Load paper in portrait orientation with 
the printing side facing up.