Canon printer PIXMA MX300 User Manual
Have a look at the manual Canon printer PIXMA MX300 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
27 Printing Photographs Directly from a Compliant Device „Setting on the Machine This section describes the PictBridge print settings on the machine. Set the print settings to Default on the PictBridge compliant device when you want to print according to the settings on the machine. zDisplaying the PictBridge Settings Screen and Specifying the Settings 1Turn on the machine. 2Press the Menu button repeatedly until DEVICE SETTINGS appears. 3Press the [ or ] button to select PICTBRIDGE SET, then press the OK button. 4Press the [ or ] button to specify the setting item, then press the OK button. 5Repeat step 4 to specify each setting item as necessary. zSetting Items * Set the items in this column to Default on the PictBridge compliant device when you want to make settings on the machine. Setting ItemDescriptionCorresponding Setting of PictBridge Compliant Devices* PAGE SIZE Select the page size, when printing directly from a PictBridge compliant device.Paper size MEDIA TYPE Select the media type, when printing directly from a PictBridge compliant device.Paper type PRINT QLTY Select the print quality, when printing directly from a PictBridge compliant device.— BORDERLESS PRINT Select bordered or borderless print. Layout IMAGE ENHANCEMENT Selects whether to optimize photos with the functions below or not. When SET is selected, you can configure the following.Image optimize VIVID Makes green and blue more lively. POP Automatically optimizes brightness and tone of a photo. REMOVE NOISE Reduces the noise on blue areas like the sky as well as on black areas. FACE BRIGHT Brightens a darkened face on the photo taken against the light. RED EYE CORR Corrects red eyes in portraits caused by flash photography.
28Faxing Faxing Preparing the Machine for Fax Typical examples of connecting the machine are described below. The machine cannot send/receive faxes if the connection is incorrect. Connect the machine correctly. „Methods of Connecting External Devices zConnecting to an Analog Line (A) Telephone line (analog) zConnecting a Telephone or Answering Machine Directly (A) Telephone or Answering machine Important If the Power Disconnects Unexpectedly If there is a power failure or if you accidentally disconnect the power cord, the date/time settings as well as all documents stored in memory will be lost. User data and speed dialing settings are retained. If the power disconnects, the following will apply: zYou will not be able to send or receive faxes or make copies. zIf a telephone is connected to the machine, you can receive voice calls. zWhether you are able to make voice calls depends on the type of your telephone. (A) (A)
29 Faxing zConnecting a Telephone or Answering Machine via a Computer (A) Computer (B) Telephone or Answering machine Users in the UK If the connector of the external device cannot be connected to the jack on the machine, you will need to purchase a B.T. adapter to connect as follows: Connect the external device line to the B.T. adapter, then connect the B.T. adapter to the jack. Important Do not connect the machine and external devices in parallel to the same telephone line using a splitter (A). The machine may not operate properly. (A) (A)(B)
30Faxing „Methods of Connecting the Various Lines The following are some basic connection scheme s that apply when you are connecting to a non- analog telephone line. These are examples and are not guaranteed to suit every connecting conditions. For details, refer to the instruction manual supplied with the network device (control devices such as an xDSL modem, terminal adapter , or dial-up router) you are connecting to this machine. z Connecting to an xDSL (A) Digital Subscriber Line (B) Splitter (C) xDSL modem (splitter may be built-in to the modem) (D) Computer zConnecting to an ISDN Line For details on ISDN connection and settings, see the manuals supplied with your terminal adapter or dial-up router. „ Setting the Telephone Line Type Before using the machine, make sure you set the correct telephone line type for your telephone line. If you are unsure of your telephone line ty pe, contact your telephone company. For ISDN (Integrated Services Digital Network) or xDSL (Digital Subscriber Line) connections, contact the telephone company or service provi der to confirm your line type. 1Press the FA X button, then press the Menu button. 2Press the [ or ] button to select USER SETTINGS , then press the OK button. 3Press the [ or ] button to select TEL LINE TYPE, then press the OK button. Note zThis setting may not be available depending on the country or region of purchase. z You can print the User’s data list to check the current setting. See “Printing the User’s Data List” on page 56. (A) (C) (B) (D) USERSETTINGS DATE/TIMESETTING TELLINETYPE TOUCHTONE
31 Faxing 4Press the [ or ] button to select the telephone line type, then press the OK button. ROTARY PULSE:Suitable for pulse dialing. TOUCH TONE:Suitable for tone dialing. 5Press the Stop/Reset button. Note You cannot use ROTARY PULSE depending on the country or region of purchase.
32Faxing Registering Sender Information A fax you receive may have information, such as the sender’s name or the company name, the sender’s phone or fax number, and the date and time of the transmission, printed in small type at the top of each page. Such sender information is called Transmit Terminal Identification, or TTI. You can register your TTI in this machine, so that the recipient of your fax will know who sent it, and when it was sent. Below is an example of how your sender informat ion would be printed on a fax sent from the machine: (A) Date and time of transmission (B) Your fax/telephone number You can select FA X or TEL to be printed before the number. See “TX TERMINAL ID” in the User’s Guide on-screen manual. (C) Your name (D) Prints the name of the destinati on when sending from coded speed dialing. (E) Page number Notez When sending black & white faxes, you can set the sender information to print inside or outside the image area. Refer to “TX TERMINAL ID” in “FAX SETTINGS” of the User’s Guide on-screen manual. z For color sending, the sender information is printed inside the print area and the recipient’s name is not printed. z You can enter the sender information from the Operation Panel. See “Registering Your Fax/Telephone Number and Name (Sender Information)” on page 34. z Three date display formats are available: YYYY/MM/DD, MM/DD/YYYY , and DD/MM/YYYY . For details on the date format settings, refer to “DATE DISPLAY” in “FAX SETTINGS” of the User’s Guide on- screen manual. THE SLEREXE COMPANY LIMITED SAPORS LANE•BOOLE•DORSET•BH25 8ER TELEPHONE BOOLE (945 13) 51617 – FAX 1234567 Our Ref. 350/PJC/EAC (A) (B) (C) (E)(D) FAX 123 4567 YOUR NAME RECIPIENT’S NAME 001/001 09/01/2007 15:33
33 Faxing „Guidelines for Entering Numbers, Letters, and Symbols The following characters are assigned to the Numeric buttons. * SP indicates a space. Follow the procedure below to enter letters and numbers when you register names and fax/ phone numbers for the sender information or a coded speed dial. 1Press the button to switch to uppercase letter mode (:A), lowercase letter mode (:a), or number mode (:1). You can see what mode you are in by the character displayed on the top right corner of the LCD. 2Press the Numeric buttons to enter a character. Press the button repeatedly until the character you want appears. zTo enter a character that is assigned to the same button as the previous entry: (1)Press the Numeric button, press the ] button, then press the same Numeric button again. zTo enter a space: (1)Press the ] button two times. In number mode, press the ] button once. zTo delete a character: (1)Press the [ button. zTo delete an entire entry: (1)Press and hold the [ button. ButtonUppercase letter modeLowercase letter modeNumber mode 11 2ABCÅÄÁÀÃÂÆÇ abcåäáàãâæç 2 3DEFËÉÈÊ defëéèê 3 4GH I Ï Í Ì Î gh i ï í ì î 4 5JKL jkl 5 6MNOÑØÖÓÒÕÔ mnoñøöóòõô 6 7PQRSÞ pqrsþ 7 8TUVÜÚÙÛ tuvüúùû 8 9WXYZÝ wxyzý 9 00 #-.SP* #!,;:^`_=/|?$@%&+()[]{} Press the button to switch to uppercase letter mode (:A), lowercase letter mode (:a), or number mode (:1). NAME:A
34Faxing „Entering the Date and Time 1Press the FA X button, then press the Menu button. 2Press the [ or ] button to select USER SETTINGS , then press the OK button two times. 3Press the Numeric buttons to enter the da te and time (in 24-hour format), then press the OK button. Enter only the last two digits of the year. 4Press the Stop/Reset button. „Registering Your Fax/Telephone Number and Name (Sender Information) 1Press the FA X button, then press the Menu button. 2Press the [ or ] button to select USER SETTINGS , then press the OK button. 3Press the [ or ] button to select UNIT TEL NUMBER , then press the OK button. 4Press the Numeric buttons to enter your fax/telephone number (max. 20 digits, including spaces), then press the OK button. To enter a plus sign (+) before the number, press the # button. NotezWhen the machine is connected to a computer with the MP Drivers installed, the date and time setting will be copied from the computer to the machine. As long as the date and time is set accurately on your computer, you do not need to set it on the machine. z If you disconnect the power cord or when there is a power failure, the date and time setting on the machine will be reset. When you connect the machine to a computer with the MP Drivers installed, the setting will be copied to the machine once again. NotezIf you misentered the date and time, press the [ or ] button to move the cursor under the number to enter the correct number. z Three formats of date are available. For details on the date format settings, refer to “DATE DISPLAY” in “FAX SETTINGS” of the User’s Guide on-screen manual. Note For details on how to enter or delete characters, see “Guidelines for Entering Numbers, Letters, and Symbols” on page 33. DATE/TIMESETTING 02/15/200718:46 UNITTELNUMBER TEL= USERSETTINGS UNITNAME
35 Faxing 5Press the OK button. 6Press the Numeric buttons to enter your name (max. 24 characters, including spaces), then press the OK button. 7Press the Stop/Reset button. „Setting Daylight Saving Time (Summer Time) Some countries adopt the daylight saving time (summer time) system that shifts the clock time forward or back at certain periods of the year. You can set the machine to automatically change the time by registering the day and time that daylight saving (summer time) begins and ends. 1Press the FA X button, then press the Menu button. 2Press the [ or ] button to select USER SETTINGS , then press the OK button. 3Press the [ or ] button to select SUMMER TIME SET , then press the OK button. 4Press the [ or ] button to select ON or OFF , then press the OK button. zIf you select OFF, go to step 7. z If you select ON, go to step 5. 5Set the date and time that summer time stars. (1) Press the OK button two times. Note For details on how to enter or delete characters, see “Guidelines for Entering Numbers, Letters, and Symbols” on page 33. Note You can print the User’s data list to confirm the sender information you have registered. See “User’s Data List” on page 56. Note This setting may not be available depending on the country or region of purchase. UNITNAME:A SUMMERTIMESET ON SETMONTH MARCH
36Faxing (2)Press the [ or ] button to select the month when summer time starts, then press the OK button two times. (3)Press the [ or ] button to select the week when summer time starts, then press the OK button two times. (4)Press the [ or ] button to select the day of the week when summer time starts, then press the OK button two times. (5)Press the Numeric buttons to enter the time (in 24-hour format) when summer time starts, then press the OK button three times. Precede single digit with a zero. 6Set the date and time that summer time ends. (1)Press the [ or ] button to select the month when summer time ends, then press the OK button two times. (2)Press the [ or ] button to select the week when summer time ends, then press the OK button two times. (3)Press the [ or ] button to select the day of the week when summer time ends, then press the OK button two times. (4)Press the Numeric buttons to enter the time (in 24-hour format) when summer time ends, then press the OK button. Precede single digit with a zero. 7Press the Stop/Reset button. SETWEEK LASTWEEK SETDAYOFWEEK SUNDAY SETSHIFTTIME 01:00 SETMONTH OCTOBER SETWEEK LASTWEEK SETDAYOFWEEK SUNDAY SETSHIFTTIME 02:00