Canon printer PIXMA MG8120B User Manual

4567
8  Wireless Setup
Select Push button method, then touch the OK 
button.
Select WPS, then 
touch the OK button.
Touch the OK button.Select Other setup, 
then touch the OK 
button.To use the PIN code method for setup, select PIN code method in , then touch the OK button. 
Follow the on-screen instructions to operate the machine and access poin\
t. When the screen in  
appears, touch the OK button. 
If the setup is not completed within 10 minutes and the timeout error sc\
reen appears, touch...

89
08  Wireless Setup
Press and hold the WPS button on the access 
point (for about 5 seconds), then touch the OK 
button on the machine within 2 minutes.
For details on the WPS button pressing, refer to the 
manual of your access point.
The Wi-Fi	lamp	(blue)	flashes	while	searching	for	or	
connecting to an access point.
When the above screen appears, touch the OK 
button.
Next, read “10 Install the Software 
(Network Connection)” on page 35!
If the timeout error screen appears, touch the 
OK...

AB
B
A
8  Wireless Setup
W i r e l e s s   S e t u p   U s i n g   W C N   ( W i n d o w s   C o n n e c t   N o w )
Read this section only when setting up a wireless connection by using th\
e WCN (Windows Connect Now) function of Windows 7/Windows 
Vista.
The machine supports “WCN-UFD”.
Setup on the Computer
Windows 7
1. Click Start > Control Panel > View network status and tasks > 
Manage wireless networks.
2.  Select the network name (SSID) and right-click it, then select 
Properties.
3....

9

N o t e s   o n   W i r e d   C o n n e c t i o n■
The	configuration,	router	functions,	setup	procedures	and	security	
settings of the network device vary depending on your system 
environment. For details, refer to your device's instruction manual or 
contact its manufacturer.
In	an	office	setup,	consult	your	network	administrator.
If you connect to a network that is not protected with security measures\
, 
there is a risk of disclosing data such as your personal information to \
a...

AB
12
C
D
9  Wired Setup
Remove the Cap (A), then connect a network device (router, etc.) with an Ethernet 
cable (B).
Use the { or } button (C) to display Setup, then touch the 
right FUNCTION button (D). 

5436
E
9  Wired Setup
Use the [ or ] button (E) to select 
Device settings, then touch the 
OK button.
Select LAN settings, then touch 
the OK button.
Select Change wireless/wired, 
then touch the OK button.
Select Wired LAN active, touch 
the OK button.
Next, read "10 Install 
the Software (Network 
Connection)" on page 35! 

101

Easy-WebPrint EX□
Easy-WebPrint EX is Web print software that is installed on the 
computer when installing the supplied software. Internet Explorer 7 or 
later is required to use this software. An Internet connection is required 
for installation.
I n s t a l l   t h e   S o f t w a r e
Install the Software (Network Connection)
Quit all running applications before installation.
Log on as the administrator (or a member of the Administrators 
group).
Do not switch users during the...

2
2
3
10  Install the Software (Network Connection)
Click Run Msetup4.exe on the AutoPlay screen, then click Yes or Continue on the 
User Account Control dialog box.
If the User Account Control dialog box reappears in following steps, click Yes or Continue.
Double-click the Setup icon of the CD-ROM folder to proceed to the following 
screen. Enter your administrator name and password, then click OK.
If the CD-ROM folder does not open automatically, double-click the CD-ROM icon on the...

456
10  Install the Software (Network Connection)
Click Install.Select Use the printer on network, then click 
Next.
Follow any on-screen instructions to proceed with the 
software installation.
When the Printer Detection screen appears, 
click Next.
For Windows 
Click Cancel and start again from , 
then be sure to select Use the printer on 
network in .
For Macintosh 
Follow on-screen instructions and 
proceed with the installation. Click Exit on 
the installation complete screen, then start...

7
7
10  Install the Software (Network Connection)
When the Detected Printers List dialog box appears, select 
Canon MG8100 series, then click Next.
Next, read “Information” on page 42!
Next, read “Registration (Macintosh)” on page 39!
On the Canon IJ Network Tool screen, select MG8100 
series in Printers, then click Next.
If the machine is not detected, Check Printer Settings 
dialog box is displayed. Refer to the printed manual: 
Network Setup Troubleshooting. Make sure there is no 
problem,...