Canon printer PIXMA MG8120B User Manual

							
4567
8  Wireless Setup
Select Push button method, then touch the OK 
button.
Select WPS, then 
touch the OK button.
Touch the OK button.Select Other setup, 
then touch the OK 
button.To use the PIN code method for setup, select PIN code method in , then touch the OK button. 
Follow the on-screen instructions to operate the machine and access poin\
t. When the screen in  
appears, touch the OK button. 
If the setup is not completed within 10 minutes and the timeout error sc\
reen appears, touch the OK 
button to perform the setup again and set the new PIN code displayed on \
the screen to the access 
point. If the timeout error screen appears even though the setup has bee\
n completed within 10 
minutes, select the method other than the PIN code method to perform the\
 wireless LAN. If another 
error appears, refer to the printed manual: Network Setup Troubleshooting.
• 
						

							
89
08  Wireless Setup
Press and hold the WPS button on the access 
point (for about 5 seconds), then touch the OK 
button on the machine within 2 minutes.
For details on the WPS button pressing, refer to the 
manual of your access point.
The Wi-Fi	lamp	(blue)	flashes	while	searching	for	or	
connecting to an access point.
When the above screen appears, touch the OK 
button.
Next, read “10 Install the Software 
(Network Connection)” on page 35!
If the timeout error screen appears, touch the 
OK button, then start over from .
If another error appears, refer to the printed 
manual: Network Setup Troubleshooting.
•
• 
						

							
AB
B
A
8  Wireless Setup
W i r e l e s s   S e t u p   U s i n g   W C N   ( W i n d o w s   C o n n e c t   N o w )
Read this section only when setting up a wireless connection by using th\
e WCN (Windows Connect Now) function of Windows 7/Windows 
Vista.
The machine supports “WCN-UFD”.
Setup on the Computer
Windows 7
1. Click Start > Control Panel > View network status and tasks > 
Manage wireless networks.
2.  Select the network name (SSID) and right-click it, then select 
Properties.
3.  Select 
Copy this network profile to a USB flash drive.
Follow the on-screen instructions to complete the settings on the comput\
er.
4.  Go to .
Windows Vista
1.  From the Start menu of the Windows side, select Network, then click 
Add a wireless device on the menu.
2.  Click 
I want to add a wireless device or computer that is not on the 
list, using a USB flash drive.
3.  Click 
Add the device or computer using a USB flash drive.
4.  Select the network name (SSID), then click 
Next.
Follow the on-screen instructions to complete the settings on the comput\
er.
5.  Go to .
Canon assumes no responsibility for any damage or loss of data stored on\
 your USB 
flash	drive	regardless	of	the	cause	even	within	the	warranty	period.
Operation	may	not	be	guaranteed	depending	on	your	USB	flash	drive.	USB	flash	drives	
with security enabled may not be used.
•
•
Setup on the Machine
1.  Select Wireless LAN setup of the 
Setup menu screen on the LCD (A), 
then touch the OK button.
2.  Select 
Other setup, then touch the OK 
button.
3.  Select 
WCN, then touch the OK button.
4.  Connect the USB flash drive to the 
Direct Print Port (USB connector) (B) 
on the front right of the machine, then 
touch the OK button.
5.  When 
Wireless LAN settings 
completed. screen is displayed, touch 
the OK button and eject the USB flash 
drive.
Next, read “10 Install the Software 
(Network Connection)” on page 35! 
						

							
9

N o t e s   o n   W i r e d   C o n n e c t i o n■
The	configuration,	router	functions,	setup	procedures	and	security	
settings of the network device vary depending on your system 
environment. For details, refer to your device's instruction manual or 
contact its manufacturer.
In	an	office	setup,	consult	your	network	administrator.
If you connect to a network that is not protected with security measures\
, 
there is a risk of disclosing data such as your personal information to \
a 
third party.
The machine cannot be used over a wireless and wired connection at 
the same time.
If an error message appears or if you have trouble with the 
network connection, refer to the printed manual: Network Setup 
Troubleshooting.
•
•
•
•
•
Before connecting the machine to the 
network, make sure that the computer and 
router is connected.
Add (connect) the machine to the network.
InternetRouter, etc.
Wired Setup 
						

							
AB
12
C
D
9  Wired Setup
Remove the Cap (A), then connect a network device (router, etc.) with an Ethernet 
cable (B).
Use the { or } button (C) to display Setup, then touch the 
right FUNCTION button (D). 
						

							
5436
E
9  Wired Setup
Use the [ or ] button (E) to select 
Device settings, then touch the 
OK button.
Select LAN settings, then touch 
the OK button.
Select Change wireless/wired, 
then touch the OK button.
Select Wired LAN active, touch 
the OK button.
Next, read "10 Install 
the Software (Network 
Connection)" on page 35! 
						

							
101

Easy-WebPrint EX□
Easy-WebPrint EX is Web print software that is installed on the 
computer when installing the supplied software. Internet Explorer 7 or 
later is required to use this software. An Internet connection is required 
for installation.
I n s t a l l   t h e   S o f t w a r e
Install the Software (Network Connection)
Quit all running applications before installation.
Log on as the administrator (or a member of the Administrators 
group).
Do not switch users during the installation process.
Internet connection may be required during the installation. 
Connection fees may apply. Consult the internet service provider.
It may be necessary to restart your computer during the 
installation process. Follow the on-screen instructions and do not 
remove the Setup CD-ROM during restarting.  
The installation resumes once your computer has restarted.
If	the	firewall	function	of	your	security	software	is	turned	on,	a	
warning message may appear that Canon software is attempting 
to access the network. If such a warning message appears, set 
the security software to always allow access.
For	the	system	requirements,	refer	to	“13	Specifications”.
•
•
•
•
•
•
•
To use the machine by connecting it to a computer, software including the 
drivers needs to be copied (installed) to the computer’s hard disk. The 
installation process takes about 20 minutes. (The installation time var\
ies 
depending on the computer environment or the number of application 
software to be installed.)
•
Turn on the computer, then insert the Setup CD-
ROM into the CD-ROM drive.
If you are using Windows, the setup program starts 
automatically.
If the program does not start automatically, 
double-click the CD-ROM icon in Computer 
or My Computer. When the CD-ROM 
contents appear, double-click MSETUP4.
EXE.
•
For Windows 
						

							
2
2
3
10  Install the Software (Network Connection)
Click Run Msetup4.exe on the AutoPlay screen, then click Yes or Continue on the 
User Account Control dialog box.
If the User Account Control dialog box reappears in following steps, click Yes or Continue.
Double-click the Setup icon of the CD-ROM folder to proceed to the following 
screen. Enter your administrator name and password, then click OK.
If the CD-ROM folder does not open automatically, double-click the CD-ROM icon on the 
desktop.
If you do not know your administrator name or password, click the help b\
utton, then 
follow the on-screen instructions.
Windows 7/Windows Vista
Windows XP
Click Easy Install.
The drivers, application software, and 
on-screen manuals are installed.
If you want to select particular 
items to install, click Custom 
Install.
• 
						

							
456
10  Install the Software (Network Connection)
Click Install.Select Use the printer on network, then click 
Next.
Follow any on-screen instructions to proceed with the 
software installation.
When the Printer Detection screen appears, 
click Next.
For Windows 
Click Cancel and start again from , 
then be sure to select Use the printer on 
network in .
For Macintosh 
Follow on-screen instructions and 
proceed with the installation. Click Exit on 
the installation complete screen, then start 
again from  and be sure to select Use 
the printer on network in .
−
−
If the Printer Connection screen appears 
instead of the screen above, the connection 
method is not correctly selected in .
• 
						

							
7
7
10  Install the Software (Network Connection)
When the Detected Printers List dialog box appears, select 
Canon MG8100 series, then click Next.
Next, read “Information” on page 42!
Next, read “Registration (Macintosh)” on page 39!
On the Canon IJ Network Tool screen, select MG8100 
series in Printers, then click Next.
If the machine is not detected, Check Printer Settings 
dialog box is displayed. Refer to the printed manual: 
Network Setup Troubleshooting. Make sure there is no 
problem, then click Next again on the screen in .
•
If the machine is not detected, refer to the printed manual: 
Network Setup Troubleshooting. Make sure there is no 
problem, then click Update.
•
When the Setup Completion dialog box appears, click 
Complete.