Canon printer PIXMA MG7520 User Manual

Device user settings•
Date display format
Changes the display format of dates when printed.
Note
•
When  ON is selected for  Print date on the print settings screen in printing from a memory card, the
date is printed in the date display format you selected.
Setting Items for Photo Printing Using the Operation Panel of the Machine
•
Read/write attribute
Selects whether to allow data to be written onto memory cards from a computer.
Important
•
Remove the memory card before changing this setting.
Setting Up...

PictBridge print settingsYou can change the print settings when printing from a PictBridge (Wireless LAN) compliant device.
Set the print settings to  Default on the PictBridge (Wireless LAN) compliant device when you want to print
according to the settings on the machine.
PictBridge print settings Screen
Disc label print setting Screen
To change print settings from the PictBridge (Wireless LAN) compliant device:
Settings on a PictBridge (Wireless LAN) Compliant Device
PictBridge print settings Screen...

brighter to print. It also analyzes a scene such as scenery, night scene, person, etc. and corrects eachscene with the most suitable color, brightness, or contrasts automatically to print.
Note
•
As a default, photos on a PictBridge (Wireless LAN) compliant device are printed with auto
correction applied.
•
If  No correction  is selected, photos are printed without correction.
6.
Red-EyeCorrection
Select  ON to correct red eyes in portraits caused by flash photography.
Depending on the type of the photo,...

Note•
If your printable disc is the recommended disc, tap Recommended disc for the suitable density
printing. If not, tap  Other disc.274 

Language selectionChanges the language for the messages and menus on the touch screen.275 

Home screen background colorSelects the background color of the HOME screen. You can select black or white.276 

Firmware updateYou can update the firmware of the machine, check the firmware version, or perform settings of a
notification screen, a DNS server and a proxy server.
Note
•
Only  Check current version  is available when Disable LAN is selected for  Change LAN in LAN
settings .
•
Install update
Performs the firmware update of the machine. If you select  Yes, the firmware update starts. Follow the
on-screen instructions to perform update.
Important
•
When you use this function, make sure that the machine...

Cassette settingsBy registering the paper size and the media type loaded in the cassette, you can prevent the machine from
misprinting by displaying the message before printing starts when the paper size or the media type of the
loaded paper differs from the print settings.
For details:
Paper Setting for Printing
•
Register cassette paper info
Registers the paper size and the media type you load in the cassette.
Note
•
When you register the paper size and the media type, the screen to select whether you...

Reset settingYou can change the settings back to the default.•
Web service setup only
Reverts the Web service settings back to the default.
•
LAN settings only
Reverts the LAN settings other than the administrator password specified by IJ Network Tool back to the default.
•
Settings only
Reverts the settings such as the paper size or media type back to the default.
•
Device info sending setting only
Reverts only the device information sending settings.
•
Reset all
Reverts all settings you made to the...

About ECO settingsThis setting allows you to use automatic duplex printing as a default to save paper and to turn the machine
on/off automatically to save electricity.
Using Duplex Printing
Using Power Saving Function
Using Duplex Printing
Follow the procedure below to use duplex printing.
1.
Make sure that the machine is turned on.
2.
Flick the HOME screen, then tap   ECO settings .
Using the Operation Panel
3.
Tap Two-sided printing setting .
4.
Specify the settings as necessary.
A.
Tap to select...