Canon printer PIXMA MG6821 User Manual

11.When the completion message appears, tap OK.
If the problem is not resolved after cleaning the paper feed roller, contact the service center.
221 

Cleaning the Inside of the Machine (Bottom Plate Cleaning)Remove stains from the inside of the machine. If the inside of the machine becomes dirty, printed paper mayget dirty, so we recommend performing cleaning regularly.
You need to prepare: a sheet of A4 or Letter-sized plain paper* * Be sure to use a new piece of paper.1.
Make sure that the power is turned on.
2.
Flick the HOME screen, then tap   Setup .
Using the Operation Panel
The setup menu screen will appear.
3.
Tap   Maintenance .
The...

9.
Load only this sheet of paper in the cassette with the ridges of the creases facing up and
the edge of the half with no crease facing to the far side.
10.
Open the paper output tray gently, then tap  OK.
The paper cleans the inside of the machine as it feeds through the machine.
Check the folded parts of the ejected paper. If they are smudged with ink, perform Bottom Plate Cleaning
again.
11.
When the completion message appears, tap  OK.
Note

Overview
Safety
Safety Precautions
Regulatory Information
Main Components and Their Use
Main Components
Power Supply
Using the Operation Panel
Changing Settings
Changing Printer Settings from Your Computer (Windows)
Changing Printer Settings from Your Computer (Mac OS)
Changing Settings from Operation Panel
Setting Up Card Slot as Memory Card Drive of Computer
Network Connection
Network Connection Tips
Network Communication (Windows)
Checking and Changing Network Settings
IJ Network Tool (Network...

Canceling a Print Job
Keeping Print Quality High
Transporting Your Printer
Legal Restrictions on Scanning/Copying
Specifications
225 

Safety
Safety Precautions
Regulatory Information
226 

Safety PrecautionsChoosing a location

Regulatory InformationFor models containing lithium battery

Users in Canada
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and
meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be...

vrstom otpada mo