Home > Canon > Printer > Canon printer PIXMA MG5722 User Manual

Canon printer PIXMA MG5722 User Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Canon printer PIXMA MG5722 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 1026
    Add page 891 to Favourites
    image text
    Enable zoom 
    							Please check and try again.
Click [Scanner Selection] if you want to select another
scanner.
Scanner driver will be closed.
152Running out of memory.
Increase available memory.
Scanner driver will be closed.
    Add page 892 to Favourites
    Enable zoom
    Add page 893 to Favourites
    image text
    Enable zoom 
    							Mechanical Problems
Power Does Not Come On
Power Shuts Off By Itself
USB Connection Problems
Cannot Communicate with Machine via USB
LCD Is Off
LCD Shows Wrong Language
Print Head Holder Does Not Move to Replacement Position
Printer Status Monitor Not Displayed (Windows)
893
    Add page 894 to Favourites
    image text
    Enable zoom 
    							Power Does Not Come On
Check1 Press ON button.
Check2
 Make sure power plug is securely connected to machine, and then turn it back
on.
Check3  Unplug machine, leave it for at least 3 minutes, and then plug it back in and
turn it on again.
If this does not solve the problem, contact your nearest Canon service center to request a repair.
894
    Add page 895 to Favourites
    image text
    Enable zoom 
    							Power Shuts Off By Itself
Check If machine is set to turn off automatically after a certain time, disable this setting.
If you have set the machine to turn off automatically after a specified time, the power will shut off by itself once
that time has elapsed.
    Add page 896 to Favourites
    image text
    Enable zoom 
    							USB Connection Problems
Printing or Scanning Is Slow/Hi-Speed USB Connection Does Not
Work/"This device can perform faster" Message Appears (Windows)
If your system environment does not support Hi-Speed USB, the machine operates at the slower speed of USB 1.1. In this case, the machine works properly but printing or scanning speed may slow down due to
the communication speed.
Check  Check following to make sure your system environment supports Hi-Speed
USB connection.
    Add page 897 to Favourites
    image text
    Enable zoom 
    							Cannot Communicate with Machine via USB
Check1 Make sure machine is turned on.
Check2 Connect USB cable properly.
As the illustration below, the USB port is at the back of the machine.
Check3  Do not start IJ Network Tool while printing.
Check4 Do not print while IJ Network Tool is running.
Check5 Make sure  Enable bidirectional support  is selected in Ports sheet of
properties dialog box of printer driver. (Windows)
How to Open the Printer Driver Setup Window
897
    Add page 898 to Favourites
    image text
    Enable zoom 
    							LCD Is Off
    Add page 899 to Favourites
    image text
    Enable zoom 
    							LCD Shows Wrong Language
Follow the instructions below to select your language.
1.
Press HOME  button and wait for about 5 seconds.
2.
Select  Setup  on HOME screen.
LCD and Operation Panel
3.
Select  Device settings  and press OK button.
4.
Press  button 4 times and press  OK button.
5.
Use  button to select a language for LCD and press  OK button.
899
    Add page 900 to Favourites
    image text
    Enable zoom 
    							Print Head Holder Does Not Move to Replacement Position
Check1 Is POWER  lamp off?
Check if the  POWER lamp is lit.
The print head holder will not move unless the power is on. If the  POWER lamp is off, close the operation panel
and turn the machine on.
The  POWER  lamp flashes while the machine is initializing. Wait until the  POWER lamp stops flashing and
remains lit, and then open the operation panel again.
Check2  Is an error message displayed on LCD?
Close the operation panel, follow the support code (error number) displayed in the error message to resolve the error, and then reopen it. For details on resolving the error, see 
List of Support Code for Error .
Check3
 Has operation panel been left open for 10 minutes or longer?
If the operation panel is left open for more than 10 minutes, the print head holder moves to the position to protect it to prevent the print head from drying out. Close and reopen the operation panel to return the print head holder
to the position for replacing.
Check4  Has machine been printing continuously for a long period?
Close the operation panel, wait a while, and then reopen it.
If the machine has been printing continuously for a long time, the print head holder may not move to the position
for replacing since the print head may overheat.
Note
    All Canon manuals Comments (0)

    Related Manuals for Canon printer PIXMA MG5722 User Manual