Home > Canon > Printer > Canon printer PIXMA MG5622 User Manual

Canon printer PIXMA MG5622 User Manual

Here you can view all the pages of manual Canon printer PIXMA MG5622 User Manual. The Canon manuals for Printer are available online for free. You can easily download all the documents as PDF.

Page 231

PictBridge print settingsYou can change the print settings when printing from a PictBridge (Wireless LAN) compliant device.
Set the print settings to  Default on the PictBridge (Wireless LAN) compliant device when you want to print
according to the settings on the machine.
To change print settings from the PictBridge (Wireless LAN) compliant device:
Settings on a PictBridge (Wireless LAN) Compliant Device
1.
Page size
Select the paper size when printing directly from a PictBridge (Wireless LAN) compliant...

Page 232

•If No correction  is selected, photos are printed without correction.6.
Red-EyeCorrection
Select  ON to correct red eyes in portraits caused by flash photography.
Depending on the type of the photo, red eyes may not be corrected or parts other than the eyes may be corrected.
232 

Page 233

Language selectionChanges the language for messages and menus on the LCD.233 

Page 234

Firmware updateYou can update the firmware of the machine, check the firmware version, or perform settings of a
notification screen, a DNS server and a proxy server.
Note
•
Only  Check current version  is available when Disable LAN is selected for  Change LAN in LAN
settings .
•
Install update
Performs the firmware update of the machine. If you select  Yes, the firmware update starts. Follow the
on-screen instructions to perform update.
Important
•
When you use this function, make sure that the machine...

Page 235

Cassette settingsBy registering the paper size and the media type loaded in the cassette, you can prevent the machine from
misprinting by displaying the message before printing starts when the paper size or the media type of the
loaded paper differs from the print settings.
For details:
Paper Setting for Printing
•
Register cassette paper info
Registers the paper size and the media type you load in the cassette.
Note
•
When you register the paper size and the media type, the screen to select whether you...

Page 236

Reset settingYou can change the settings back to the default.•
Web service setup only
Reverts the Web service settings back to the default.
•
LAN settings only
Reverts the LAN settings other than the administrator password specified by IJ Network Tool back to the default.
•
Settings only
Reverts the settings such as the paper size or media type back to the default.
•
Device info sending setting only
Reverts only the device information sending settings.
•
Reset all
Reverts all settings you made to the...

Page 237

About ECO settingsThis setting allows you to use automatic duplex printing as a default to save paper and to turn the machine
on/off automatically to save electricity.
Using Duplex Printing
Using Power Saving Function
Using Duplex Printing
Follow the procedure below to use duplex printing.
1.
Make sure that the machine is turned on.
2.
Select   ECO settings  on the HOME screen.
LCD and Operation Panel
3.
Select  Two-sided printing setting , then press the OK button.
4.
Use the  button to change the...

Page 238

1.Make sure that the machine is turned on.2.
Select  ECO settings  on the HOME screen.
LCD and Operation Panel
3.
Select  Energy saving settings , then press the OK button.
4.
Use the  button to change the setting item, use the  button to change the setting,
then use the  OK button to confirm the selection.
1.
Auto power off
Specifies the length of time to turn the machine off automatically when no operation is made or no printing data is sent to the machine.
Note
•
The Auto power off setting is invalid...

Page 239

About Quiet settingEnables this function on the machine if you want to reduce the operating noise, such as when printing at
night.
Follow the procedure below to perform setting.1.
Make sure that the machine is turned on.
2.
Select   Quiet setting  on the HOME screen.
LCD and Operation Panel
3.
Use the  button to select  Use quiet mode , then press the OK button.
The confirmation screen is displayed, then the 
 icon appears as the  Quiet setting menu icon.
Activate this setting to reduce the operating...

Page 240

Using the Machine with the Access Point ModeBy using the machine as an access point in an environment that does not have wireless LAN router or
access point, or by using the machine as an access point temporarily in an environment that has wireless
LAN router or access point, you can connect the machine to an external device such as a computer or a
smartphone and print/scan from them.
This section describes how to enable the access point mode, the access point name of the machine, and the security...
Start reading Canon printer PIXMA MG5622 User Manual

Related Manuals for Canon printer PIXMA MG5622 User Manual

All Canon manuals