Canon printer PIXMA MG2924 User Manual

Problems with the Machine While Using with Network
The Machine Stopped Working Suddenly
Ink Remaining Level Is Not Displayed on Printer Status Monitor of the Machine
Printing Speed Is Slow
Cannot Use the Machine on Replacing an Access Point or Changing Its settings
581 

The Machine Stopped Working Suddenly
Cannot Communicate with the Machine After the Network Settings Are Changed
Cannot Communicate with the Machine over the Wireless LAN
Cannot Communicate with the Machine Using the Access Point Mode
Cannot Print or Scan from a Computer Connected to the NetworkCannot Communicate with the Machine After the Network Settings AreChanged
It may take a while for the computer to obtain the IP address, or you may need to restart your computer.Search for the machine again after...

The wireless channel to be used may be limited depending on wireless network devices installed in the
computer. Refer to the instruction manual provided with your computer or your wireless network device to
specify the valid wireless channel.
Check9  Make sure that the channel confirmed in Check 8 can communicate with the
computer.
If not, change the channel set to the access point.
Check10  Make sure that the firewall of the security software is disabled.
If the firewall function of your security...

2.Release the Stop button.3.
Press the  Color button.
The  Wi-Fi  lamp lights up.
4.
Press and hold the  Wi-Fi button until the  POWER lamp flashes 3 times.
5.
Release the  Wi-Fi button.
The access point mode is enabled and the machine can be used as an access point.
Check3  Is the machine selected to connect external communication devices (e.g.
computers, smartphones, or tablets)?
Select an access point name (SSID) specified for the machine as a destination for external communication devices.
Check4...

Ink Remaining Level Is Not Displayed on Printer Status Monitor of
the Machine
Use the printer driver with bidirectional communication.Select  Enable bidirectional support  in the Ports sheet of the properties dialog box of the printer driver.
How to Open the Printer Driver Setup Window
585 

Printing Speed Is Slow
Check1 The machine may be printing out a large job issued from another computer.
Check2
 Make sure that the radio status is good and adjust the installation positions
while monitoring the radio status with IJ Network Tool.
Monitoring Wireless Network Status
Make sure that there is no barrier or obstacle between the access point and the machine. Wireless communication between different rooms or floors is generally poor. The metal, concrete, or timber including the
metallic material,...

Cannot Use the Machine on Replacing an Access Point or
Changing Its settings
When you replace an access point, perform network setup of the machine again.Perform network setup again with the Setup CD-ROM or perform it again according to the instructions on
our website.
If the problem is not resolved, see below.
Cannot Communicate with the Machine After Applying MAC/IP Address Filtering or Entering an
Encryption Key to the Access Point
When Encryption Is Enabled, Cannot Communicate With the Machine After...

Cannot Detect a Machine on a Network
Cannot Detect the Machine When Setting up Network Communication
The Machine Cannot Be Detected in the Wireless LAN
588 

Cannot Detect the Machine When Setting up Network
Communication
If the machine could not be detected on the network when setting up the network communication, confirmthe network settings before redetecting the machine.
Cannot Detect the Machine during Wireless LAN Setup: Check 1
Important
•
If the machine cannot be detected while you are setting up the network communication using a USB
cable, the machine may be in the access point mode. In this case, finish the access point mode and enable the wireless...

Cannot Detect the Machine during Wireless LAN Setup: Check 1Are the computer and network device (router, access point, etc.) configured
and can the computer connect to the network?
Make sure that you can view web pages on your computer.
If you cannot view any web pages:
Configure the computer and network device.
For the procedures, refer to the instruction manuals supplied with the computer and network device, or contact their manufacturers.
If you can view web pages after configuring the computer and...