Canon printer PIXMA MG2922 User Manual
Have a look at the manual Canon printer PIXMA MG2922 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Changing the Machine Settings Using the Operation Panel About Quiet setting Turning on/off the Machine Automatically Using the Machine with the Access Point Mode 171
About Quiet settingEnables this function on the machine if you want to reduce the operating noise, such as when printing at night. Follow the procedure below to perform setting.1. Make sure that the machine is turned on. 2. Press and hold the Stop button until the Alarm lamp flashes 9 times. 3. Release the Stop button. 4. Press the Color button. To disable the function, press the Black button in step 4. Important • Operating speed may be reduced compared to when the quiet mode is not selected. Note • You can set the quiet mode from the operation panel of the machine, the printer driver, or ScanGear (scanner driver). No matter how you set the quiet mode, the mode is applied when you perform operations from the operation panel of the machine or printing and scanning from the computer. 172
Turning on/off the Machine AutomaticallyYou can enable the machine to turn on/off automatically considering the environment Turning on the Machine Automatically Turning off the Machine Automatically Turning on the Machine AutomaticallyYou can enable the machine to turn on automatically when you perform printing or scanning operationsfrom the computer. 1. Make sure that the machine is turned on. 2. Press and hold the Stop button until the Alarm lamp flashes 14 times. 3. Release the Stop button. 4. Press the Color button. To disable the function, press the Black button in step 4. Note • You can select whether you turn the machine on automatically from the operation panel of the machine, the printer driver, or ScanGear (scanner driver). No matter how you set the quiet mode, the mode is applied when you perform printing or scanning operations from the computer. Turning off the Machine Automatically You can enable the machine to turn off automatically when no operation is made or no printing data is sent to the machine for a specified period of time. 1. Make sure that the machine is turned on. 2. Press and hold the Stop button until the Alarm lamp flashes 13 times. 3. Release the Stop button. 4. Press the Color button. To disable the function, press the Black button in step 4. Note • You can select whether you turn off the machine automatically from the operation panel of the machine, the printer driver, or ScanGear (scanner driver). From the printer driver or ScanGear (scanner driver), you can specify the time before turning off the machine. 173
Using the Machine with the Access Point ModeBy using the machine as an access point in an environment that does not have wireless LAN router or access point, or by using the machine as an access point temporarily in an environment that has wireless LAN router or access point, you can connect the machine to an external device such as a computer or a smartphone and print/scan from them. This section describes how to enable the access point mode, the access point name of the machine, and the security setting. How to enable the Access Point Mode Printing/Scanning with the Access Point Mode How to terminate the Access Point Mode Setting of the Access Point Mode Important • Before using the machine with the access point mode, confirm the usage restrictions then switch the machine to the access point mode. Restrictions • If you use the machine with the access point mode for a long time, we recommend you change the default password to the combination of numbers and letters from the point of view of security. How to enable the Access Point Mode Enable the access point mode following the procedure below. 1. Make sure that the machine is turned on. 2. Press and hold the Wi-Fi button until the Alarm lamp flashes 3 times. 3. Release the Wi-Fi button. When the ON lamp changed from flashing to lit, the access point mode is enabled. Note • To confirm the current access point mode setting of the machine, print out the network setting information. Printing Out Network Setting Information • You can specify the security setting optionally. Setting of the Access Point Mode Printing/Scanning with the Access Point Mode Print/Scan with the access point mode following the procedure below. 1. Connect an external device such as a computer or a smartphone to the machine via wireless LAN. 174
Perform wireless LAN settings with your external device, then assign the access point name specified for the machine as a destination. Note • For details on how to perform wireless LAN settings with an external device, refer to the device's instruction manual. • When a WPA2-PSK (AES) password is valid on the machine, entering the password is required to connect an external device to the machine via wireless LAN. Enter the password specified for the machine. 2. Start printing or scanning from an external device such as a computer or a smartphone. Note • For details on how to print or scan from an external device such as a computer or a smartphone via wireless LAN, refer to the device's or application's instruction manual. How to terminate the Access Point Mode In environments that the machine is connected with the computer over the wireless LAN usually, set the machine to the wireless LAN connection following the procedure below when you finish using the machine with the access point mode temporarily. 1. Press and hold the Wi-Fi button until the Alarm lamp flashes 4 times. 2. Release the Wi-Fi button. When the ON lamp changed from flashing to lit, the wireless LAN mode is enabled. Note • If you do not use the machine with the access point mode or over the wireless LAN: Follow the procedure below to disable the access point mode and the wireless LAN. 1. Press and hold the Stop button until the Alarm lamp flashes 18 times. 2. Release the Stop button. 3. Press the Black button. The Wi-Fi lamp goes off. Setting of the Access Point Mode The initial value of the access point mode is set as follows. SSID (access point name)XXXXXX-MG2900series * "XXXXXX" is the last six digits of MAC address of the machine.Security settingWPA2-PSK (AES)PasswordSerial number of the machine 175
Note• To confirm the MAC address of the machine, print out the network setting information. Printing Out Network Setting Information • You can change the security setting and the password using IJ Network Tool. If you change the access point mode setting of the machine, also change the access point setting of the external device such as a computer or a smartphone. 176
Initializing the Machine SettingsYou can initialize the machine settings. Important • When using the machine over wireless LAN, note that initialization erases all network settings on themachine, and printing operation from a computer over network may become impossible. To use the machine over network, perform setup with the Setup CD-ROM or perform it according to the instructions on our website. Follow the procedure below to initialize the machine settings. 1. Make sure that the machine is turned on. 2. Press and hold the Stop button until the Alarm lamp flashes 21 times. 3. Release the Stop button. All the machine settings are initialized. The administrator password specified by IJ Network Tool reverts to the default setting. Note • You cannot initialize the current position of the print head. 177
Disabling the Wireless LAN Function of the MachineFollow the procedure below to disable the wireless LAN.1. Make sure that the machine is turned on. 2. Press and hold the Stop button until the Alarm lamp flashes 18 times. 3. Release the Stop button. 4. Press the Black button. The Wi-Fi lamp goes off. Note • When you enable the wireless LAN, press the Color button in step 4. 178
Information about Network Connection Useful Information about Network Connection 179
Useful Information about Network Connection Default Values Set at Factory (Network) Connecting the Machine to the Computer Using a USB Cable When Detecting the Printers Have the Same Name during Setup Connecting to Other Computer with LAN/Changing the Connection Method from USB to LAN Printing Out Network Setting Information 180