Canon printer PIXMA MG2922 User Manual
Have a look at the manual Canon printer PIXMA MG2922 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
(8) operation panelUse to change the settings of the machine or to operate it. Operation Panel (9) platen glass Load an original here. 91
Rear View (1) power cord connectorPlug in the supplied power cord. (2) USB port Plug in the USB cable to connect the machine with a computer. Important • Do not touch the metal casing. • Do not plug in or unplug the USB cable while the machine is printing or scanning originals with thecomputer. 92
Inside View (1) FINE cartridge (ink cartridges)A replaceable cartridge that integrates print head and ink tank. (2) FINE cartridge holder Install the FINE cartridge. The color FINE cartridge should be installed into the left slot and the black FINE cartridge should be installed into the right slot. Note • For details on replacing a FINE cartridge, see Replacing a FINE Cartridge . Important • The area around the parts (A) may be splattered with ink. This does not affect the performance of the machine. • Do not touch the parts (A). The machine may not print properly if you touch them. 93
Operation Panel* All lamps on the operation panel are shown lit in the figure below for explanatory purposes. (1) ON button Turns the power on or off. Before turning on the power, make sure that the document cover is closed. Turning the Machine On and Off (2) ON lamp Lights after flashing when the power is turned on. Note • You can check the status of the machine by the ON and Alarm lamps. • ON lamp is off: The power is off. • ON lamp lights: The machine is ready to print. • ON lamp flashes: The machine is getting ready to print, or printing is in progress. • Alarm lamp flashes: An error has occurred and the machine is not ready to print. • ON lamp flashes and Alarm lamp flashes alternately: An error that requires contacting the service center may have occurred. If an Error Occurs (3) Wi-Fi button Hold down to automatically set up the wireless LAN connection. (4) Wi-Fi lamp Lights or flashes to indicate the wireless LAN status. Lights: Wireless LAN connection is enabled. Flashes: Printing or scanning over wireless LAN. Also flashes while configuring the wireless LANconnection. 94
(5) Alarm lampLights or flashes when an error occurs. When performing machine maintenance or machine settings, options can be selected according to the number of flashes. (6) ink lamps Light or flash when ink runs out, etc. The upper lamp indicates the black FINE cartridge status, the lower lamp the color FINE cartridge status. (7) Stop button Cancels operations. You can press this button to cancel a print, copy, or scan job in progress. Holding this button down lets you select maintenance options or machine settings. (8) Black button* Starts black & white copying. You can also press this button to finalize your selection for the setting item. (9) Color button* Starts color copying. You can also press this button to finalize your selection for the setting item. * In the software applications or manuals, the Color and Black buttons are collectively called the "Start" or "OK" button. 95
About the Power Supply of the Machine Confirming that the Power Is On Turning the Machine On and Off Notice for the Power Plug/Power Cord Notice for Unplugging the Power Cord 96
Confirming that the Power Is OnThe ON lamp is lit when the machine is turned on. Note • It may take a while for the machine to start printing immediately after you turn on the machine. 97
Turning the Machine On and OffTurning on the machine1. Press the ON button to turn on the machine. The ON lamp flashes and then remains lit. Confirming that the Power Is On Note • It may take a while for the machine to start printing immediately after you turn on the machine. • If the Alarm lamp lights up or flashes, see If an Error Occurs . • You can set the machine to automatically turn on when a print or scan operation is performed from a computer connected by USB cable or wireless network. This feature is set to off by default. For details on the auto power on feature, see below. From the machine Turning on/off the Machine Automatically From the computer Managing the Printer Power Turning off the machine 1. Press the ON button to turn off the machine. When the ON lamp stops flashing, the machine is turned off. Important • When you unplug the power cord after turning off the machine, be sure to confirm that the ON lamp is off. 98
Note• You can set the machine to automatically turn off when no operations are performed or no print jobs are sent to the machine for a certain interval. This is the default setting. For details on the auto power off feature, see below. From the machine Turning on/off the Machine Automatically From the computer Managing the Printer Power 99
Notice for the Power Plug/Power CordUnplug the power cord once a month to confirm that the power plug/power cord does not have anythingunusual described below.• The power plug/power cord is hot. • The power plug/power cord is rusty. • The power plug/power cord is bent. • The power plug/power cord is worn. • The power plug/power cord is split. Caution • If you find anything unusual with the power plug/power cord described above, unplug the power cord and call for service. Using the machine with one of the unusual conditions above may cause a fire or an electric shock. 100