Canon printer PIXMA MG2922 User Manual

Changing the Machine Settings Using the Operation Panel
About Quiet setting
Turning on/off the Machine Automatically
Using the Machine with the Access Point Mode
171 

About Quiet settingEnables this function on the machine if you want to reduce the operating noise, such as when printing at
night.
Follow the procedure below to perform setting.1.
Make sure that the machine is turned on.
2.
Press and hold the  Stop button until the  Alarm lamp flashes 9 times.
3.
Release the  Stop button.
4.
Press the  Color button.
To disable the function, press the  Black button in step 4.
Important
•
Operating speed may be reduced compared to when the quiet mode is not selected.
Note...

Turning on/off the Machine AutomaticallyYou can enable the machine to turn on/off automatically considering the environment
Turning on the Machine Automatically
Turning off the Machine Automatically
Turning on the Machine AutomaticallyYou can enable the machine to turn on automatically when you perform printing or scanning operationsfrom the computer.
1.
Make sure that the machine is turned on.
2.
Press and hold the  Stop button until the  Alarm lamp flashes 14 times.
3.
Release the  Stop button.
4....

Using the Machine with the Access Point ModeBy using the machine as an access point in an environment that does not have wireless LAN router or
access point, or by using the machine as an access point temporarily in an environment that has wireless
LAN router or access point, you can connect the machine to an external device such as a computer or a
smartphone and print/scan from them.
This section describes how to enable the access point mode, the access point name of the machine, and the security...

Perform wireless LAN settings with your external device, then assign the access point name specified
for the machine as a destination.
Note
•
For details on how to perform wireless LAN settings with an external device, refer to the device's instruction manual.
•
When a WPA2-PSK (AES) password is valid on the machine, entering the password is required
to connect an external device to the machine via wireless LAN. Enter the password specified for
the machine.
2.
Start printing or scanning from an...

Note•
To confirm the MAC address of the machine, print out the network setting information.
Printing Out Network Setting Information
•
You can change the security setting and the password using IJ Network Tool.
If you change the access point mode setting of the machine, also change the access point setting of
the external device such as a computer or a smartphone.
176 

Initializing the Machine SettingsYou can initialize the machine settings.
Important
•
When using the machine over wireless LAN, note that initialization erases all network settings on themachine, and printing operation from a computer over network may become impossible. To use the
machine over network, perform setup with the Setup CD-ROM or perform it according to the instructions
on our website.
Follow the procedure below to initialize the machine settings.
1.
Make sure that the machine is turned on....

Disabling the Wireless LAN Function of the MachineFollow the procedure below to disable the wireless LAN.1.
Make sure that the machine is turned on.
2.
Press and hold the  Stop button until the  Alarm lamp flashes 18 times.
3.
Release the  Stop button.
4.
Press the  Black button.
The  Wi-Fi  lamp goes off.
Note
•
When you enable the wireless LAN, press the  Color button in step 4.
178 

Information about Network Connection
Useful Information about Network Connection
179 

Useful Information about Network Connection
Default Values Set at Factory (Network)
Connecting the Machine to the Computer Using a USB Cable
When Detecting the Printers Have the Same Name during Setup
Connecting to Other Computer with LAN/Changing the Connection Method
from USB to LAN
Printing Out Network Setting Information
180