Canon printer PIXMA MG2920 white User Manual

Aligning the Print Head Position Automatically from Your
Computer
Print head alignment corrects the installation positions of the print head and improves deviated colors and
lines.
This printer supports two head alignment methods: automatic head alignment and manual head alignment.
Normally, the printer is set for automatic head alignment. If the printing results of automatic print head
alignment are not satisfactory, 
perform manual head alignment .
The procedure for performing automatic print head...

Use Your Computer to Print a Nozzle Check PatternThe nozzle check function allows you to check whether the print head is working properly by printing a
nozzle check pattern. Print the pattern if printing becomes faint, or if a specific color fails to print.
The procedure for printing a nozzle check pattern is as follows:
 Nozzle Check
1.
Open the printer driver setup window
2.
Click  Nozzle Check  on the Maintenance  tab
The  Nozzle Check  dialog box opens.
Click  Initial Check Items  to display the...

Cleaning Inside the PrinterPerform bottom plate cleaning before you execute duplex printing to prevent smudges on the back side of
the paper.
Also perform bottom plate cleaning if ink smudges caused by something other than print data appear on the
printed page.
The procedure for performing bottom plate cleaning is as follows:
 Bottom Plate Cleaning
1.
Open the printer driver setup window
2.
Click  Bottom Plate Cleaning  on the Maintenance  tab
The  Bottom Plate Cleaning  dialog box opens.
3.
Load paper...

Cleaning the Machine
Cleaning the Exterior of the Machine
Cleaning the Platen Glass and Document Cover
Cleaning the Paper Feed Roller
Cleaning the Inside of the Machine (Bottom Plate Cleaning)
154 

Cleaning the Exterior of the MachineBe sure to use a soft and dry cloth such as eyeglasses cleaning cloth and wipe off dirt on the surface gently.Smooth out wrinkles on the cloth if necessary before cleaning.
Important
•
Be sure to turn off the power and unplug the power cord before cleaning the machine.
•
Do not use tissue paper, paper towels, rough-textured cloth, or similar materials for cleaning so as notto scratch the surface.
•
Never use volatile liquids such as thinners, benzene, acetone, or any...

Cleaning the Platen Glass and Document Cover
Important
•
Be sure to turn off the power and unplug the power cord before cleaning the machine.
•
Do not use tissue paper, paper towels, rough-textured cloth, or similar materials for cleaning so as notto scratch the surface.
•
Never use volatile liquids such as thinners, benzene, acetone, or any other chemical cleaner to cleanthe machine, as this may cause a malfunction or damage the surface of the machine.
With a soft, clean, lint-free and dry cloth, wipe...

Cleaning the Paper Feed RollerIf the paper feed rollers are dirty or paper powder is attached to it, paper may not be fed properly.
In this case, clean the paper feed rollers. Cleaning will wear out the paper feed rollers, so perform this only
when necessary.
You need to prepare: a sheet of A4 or Letter-sized plain paper or cleaning sheet available on the
market1.
Make sure that the power is turned on and remove any paper from the rear tray.
2.
Clean the paper feed rollers without paper.
1.
Hold down the...

Cleaning the Inside of the Machine (Bottom Plate Cleaning)Remove stains from the inside of the machine. If the inside of the machine becomes dirty, printed paper mayget dirty, so we recommend performing cleaning regularly.
You need to prepare: a sheet of A4 or Letter-sized plain paper* * Be sure to use a new piece of paper.1.
Make sure that the power is turned on and remove any paper from the rear tray.
2.
Prepare paper.
1.
Fold a single sheet of A4 or Letter-sized plain paper in half widthwise, then...

Important•
Be sure to turn off the power and unplug the power cord before cleaning the machine.159 

Changing the Machine Settings
Changing Machine Settings from Your Computer
Initializing the Machine Settings
Disabling the Wireless LAN Function of the Machine
160