Canon printer PIXMA iP6600D User Manual

Basic Printing
27
7Print the document.
(1) Click Print.
You can cancel a print job while printing.
See “Canceling Printing
Canceling PrintingCanceling Printing Canceling Printing” on page 27.
Canceling Printing
You can cancel a print job while printing, with the Stop/Reset button on the printer.
1Press the Stop/Reset
Stop/ResetStop/Reset Stop/Reset button while printing.
Printing is canceled and paper is fed out.
Click Cancel Printing on the Canon IJ Status Monitor to stop printing. To 
display the Canon...

Basic Printing
28
1Select Print
PrintPrint Print from the File
FileFile File menu in your application program.
The Print dialog box opens.
2Select Edit Printer List
Edit Printer ListEdit Printer List Edit Printer List from the Printer pop-up menu.
The Printer List opens.
3Double-click the printer name displayed in the Name list
Name listName list Name list.
The iP6600D
iP6600DiP6600D iP6600D dialog box opens.
4Select the desired document, then click Delete
DeleteDelete Delete icon.
To temporality stop a...

Basic Printing
29
Accessing the Printer Driver (Windows)
The printer properties dialog box can be opened from either within an application, or 
directly from the Windows Start menu.
This manual refers to Windows XP SP2 operation.
The operations may vary depending on the version of your Windows operating 
system.

Opening the Printer Properties Dialog Box from Your Application 
Program
Depending on your application program, the command and menu names 
may differ, and there may be more steps involved in...

Basic Printing
30
3Open the File
FileFile File menu and select Printing Preferences
Printing PreferencesPrinting Preferences Printing Preferences (or Properties
PropertiesProperties Properties).
The printer properties dialog box opens.
When opening the printer properties dialog box from Properties, the tabs related to 
the Windows function (e.g., the Ports tab, or the Details tab) are displayed. These 
tabs are not displayed, when the printer properties dialog box is opened from 
Printing Preferences or...

Printing Maintenance
31
Printing Maintenance
Printing MaintenancePrinting Maintenance Printing Maintenance
Replacing an Ink Tank
Replace ink tank(s) if they are out of ink. When replacing them, check the model numbers 
and their installation positions.
With this printer, the ink tanks must be installed in the order (from left to right) indicated 
below:
For details, refer to “Replacing an Ink Tank” in the 
Direct Printing Guide.

To maintain optimal print quality, use an ink tank within six months of...

Printing Maintenance
32
When Printing Becomes Faint or Colors are Incorrect
When printing becomes faint or colors are incorrect, even if ink remains in the ink tanks, the 
print head nozzles are probably clogged. Follow the procedures below to clean the nozzles.
If the ruled lines are shifted after running the print head maintenance, align the print head.
Before printing the nozzle check pattern or cleaning the Print Head, check the 
following;

Open the cover and make sure that all the ink tanks click...

Troubleshooting
33
Troubleshooting
TroubleshootingTroubleshooting Troubleshooting
This section provides troubleshooting tips for the most common printing problems. 
Troubleshooting usually falls into one of the following categories. 
Refer to the 
User’s Guide for additional information on topics not covered in this section.
When an error message is displayed on the LCD, refer to “An Error Message is Displayed on 
the LCD” in the 
Direct Printing Guide. When photos cannot be printed properly from a...

Troubleshooting
34
Cannot Install the Printer Driver
ProblemPossible CauseTr y  Th is
Cannot Install the 
Printer DriverInstallation 
procedure not 
followed correctlyFollow the Easy Setup Instructions packaged with your printer for proper printer 
driver installation.
If the installer was forced to be terminated due to an error, Windows may be 
unstable. Remove the CD-ROM from the CD-ROM drive and restart your computer. 
Reinstall the printer driver. If this problem persists, refer to your Windows...

Troubleshooting
35
Cannot Connect to PC Properly
ProblemPossible CauseTr y  Th is
Printing Speed Is 
Slow/USB 2.0 Hi-
Speed 
Connection Does 
Not Work.Yo u r e n vi ron m en t  is 
not fully compatible 
with USB 2.0.If your environment is not fully compatible with USB 2.0, the printer will operate at 
a lower speed provided under USB 1.1.
Check the following to ensure that your PC environment supports USB 2.0 Hi-
Speed connection.

The USB port on your PC supports USB 2.0 Hi-Speed connection.

Both the...

Troubleshooting
36
Print Results Not Satisfactory or Contains Errors
ProblemPossible CauseTr y Th is
Ink does not eject 
properly/Printing is 
Blurred/Colors are 
Wrong/White 
Streaks appearPrint head nozzles are 
cloggedOpen the cover and check if all ink tanks lamp are lit.
Refer to “
““ “Replacing an Ink Tank
Replacing an Ink TankReplacing an Ink Tank Replacing an Ink Tank” in the Direct Printing Guide.
Print the nozzle check pattern to check for uneven ink output.
Refer to “Printing the Nozzle Check...