Canon printer PIXMA iP4700 User Manual

							
Make sure to read this manual before using the printer. Please keep it in hand for future reference.
Getting Started
Read Me First
series
Photo Printer 
						

							
Model Number: K10341 (iP4700)
Macintosh and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.•
Microsoft is a registered trademark of Microsoft Corporation.•
Windows is a trademark or registered trademark of Microsoft Corporation \
in the U.S. and/or other countries.•
Windows Vista is a trademark or registered trademark of Microsoft Corporation in \
the U.S. and/or other countries.•
S y m b o l s   U s e d   i n   T h i s   D o c u m e n t■
Instructions as notes for operation or additional explanations.
Instructions including important information. Be sure to read these indi\
cations.
Descriptions for operations that take some time to complete.
Indicates operations in Windows.
Indicates operations in Macintosh.
Internet Explorer is a trademark or registered trademark of Microsoft Co\
rporation in the U.S. and/or other countries.• 
						

							

6
After Installing the Printer
Install the Software5
Install the Ink Tanks4
Install the Print Head3
Turn the Power On2
Loading Paper
Preparation1
Contents 
						

							

234561
11
Preparation
5 ink tanksPrint Head
A USB cable (A-B type) is necessary to connect the printer with your co\
mputer.•
Manuals•
Setup CD-ROM (containing the drivers, applications and on-screen manual\
s)•
Matte Photo Paper MP-101 (for Automatic Print Head Alignment)•
C h e c k   t h e   I n c l u d e d   I t e m s■
Choosing a Location□
Do not install the printer where an object may fall on it. The object may fall inside the printer, resulting in malfunction.•
Do not place any object on top of the printer. It may fall into the printer when opening covers, resulting in malfunction.•
power cord
Warranty•
(BK, M, C, PGBK, Y)
Before turning on the printer, remove all orange tapes and protective sheets 
from the inside and outside of the printer. 
						

							

134562
12
B
A
3
2
Turn the Power On
Plug the power cord into the left side at the back of 
the printer, then connect the other end to the wall 
outlet.
Turn on the printer (A).
Do NOT connect the USB cable at this stage.•
Make sure that the POWER lamp (B) lights 
green. 
						

							


3

B
A

12
C
Install the Print Head
Open the Paper Output Tray (A) and the Top Cover 
(B).
Handle the Print Head carefully. Do not drop or apply excessive pressure to it.•
The Print Head Holder makes a noise as it moves. This is normal operation.•
If the Print Head Holder does not move, make sure that the printer is tu\
rned on.•
Make sure that the Print Head Holder (C) moves 
to the installation position. 
						

							


124563

F

43D
E
5
G
Firmly raise the Print Head Lock Lever (D) of the Print Head Holder 
until it stops.
Remove the Print Head from the silver 
package.
There may be some transparent or light blue ink on the inside of the bag\
 the Print Head comes in, or 
the inside of the protective cap - this has no effect on print quality. Be careful not to get ink on yourself when handling these items.
•
Remove the orange protective cap.
Do not touch the inside of the Print Head Holder (E). The printer may not print properly if you touch it.•
Do not touch the inside (F) or metal parts (G) of the Print Head. The printer may not print properly if you touch them.• 
						

							

3
76
124563
Lower the Print Head Lock Lever completely.Tilt the Print Head forward and set it in place as shown.
Do not knock the Print Head against the sides of the holder.•Once you have installed the Print Head, do not remove it unnecessarily.•
Hold the Print Head Lock Lever firmly and lower it gently.• 
						

							

123564
1
2
1
4
2A
B
C
Install the Ink Tanks
Be sure to use the supplied ink tanks.•
Pull the orange tape (1) in the direction of the 
arrow to peel off the protective film and remove 
the film (2) completely.
Handle the ink tanks carefully. Do not drop or apply excessive pressure to them.•
Do not hold the sides of the ink tank; ink may splash.•
If the Top Cover is left open for more than 10 minutes, the Print Head Holder moves to the right. In this case, close and reopen the Top Cover.
•
While pressing down with your left thumb, twist off the 
orange protective cap (A) located on the bottom of the 
ink tank.
Do not touch the electrical contacts (B) or open ink port (C) on the ink tank. The printer may not print properly if you touch them.
• 
						

							


4

435
Tilt the ink tank, then insert it under the label and 
against the back end of the slot.
Make sure that the color of the label matches the ink 
tank.
Press the PUSH mark on the ink tank firmly until it 
clicks.
Once you have installed the ink tanks, do not remove them unnecessarily.•
Install all the other ink tanks in the same way.
When the installation is completed properly, the Ink 
lamp lights red.
Install all the ink tanks.
Make sure all the Ink lamps light red.