Canon printer PIXMA iP3600 User Manual

  9
6
1 2 354
5
Install the Software
To use the printer by connecting it to a computer, software including 
the drivers needs to be copied (installed) to the computer's hard disk.
The screens below are based on  Windows Vista operating system 
Ultimate Edition  (hereafter referred to as " Windows Vista ") and  Mac 
OS X v.10.5.x .
 Macintosh  (P.17)  Windows  (P.10)
Quit all running applications before installation.
You need to log on as the administrator (or a member of the Administrators...

0
(A)
(B)
1
5
If the Found New Hardware or Found 
New Hardware Wizard screen appears:
Windows
Press the  ON button (A) to TURN OFF THE PRINTER and turn on the computer, then insert the  Setup 
CD-ROM  into the CD-ROM drive.
The setup program should run automatically.
Operating noise continues for about 30 
seconds until the printer turns off. Make sure 
that the POWER lamp (B) stops flashing.
• Windows Vista
Windows XP/2000
Go to Step 
.
Go to Step 
.
1
2
3
If the program does not start...

  
6
1 2 354
32Windows Vista Windows Vista
 AutoPlay   screen appears, click   Run Msetup4.exe . User Account Control   screen appears, click  Continue .
If the same screen reappears in subsequent steps, click   Continue . 

2
654
5
Click Install .
Move the cursor over items to display 
explanations. Installation starts.
Follow any on-screen instructions to install the software.
•
Read the  License Agreement  screen carefully and 
click  Yes.
Click 
Easy Install .
The drivers, application software, and on-screen 
manuals are installed automatically.
If you want to select particular items to install, 
click Custom Install and follow the on-screen 
instructions to proceed with the installation.
•
Windows 

  3
6
1 2 354
USB
87
The  USB port  is located on the right side at the back of the printer.
• It takes about 20 seconds for the  
POWER   lamp  to light green.
When the printer is recognized by the computer, a message appears on the screen.
If you cannot go to the next procedure after 10 minutes, click   Help  and confi rm the 
message.
•
•
•
When the  
Printer Connection   screen appears, connect one end of the USB 
cable to the computer, the other to the printer, then TURN THE PRINTER ON. Click...


10
5
9
For details, refer to "6 Loading Paper" on page 22.
•
When the  Load plain paper into the cassette  screen appears, load 
plain paper in the Cassette and click  Next. Click 
Next.
It may take a while for the next screen to appear. Click  Next only once.
Windows 

  5
6
1 2 354
Serial Number
* * * * * * * 
11
Click   Next .
If connected to the Internet, the user registration page appears. Follow the on-screen instructions to register your product. You will need your product 
serial number, which is located on the inside of the printer.
To register later, click   Cancel .  User Registration  can be started from the  Solution Menu  icon. For details, refer to " Solution Menu " on page 26.
• Internet connection is required. (Connection fees apply.)
• 

  
1213
5
Click Exit.
If Restart is displayed, make sure that the  Restart the system now 
(recommended)  check box is selected, then click  Restart. After restarting the 
computer, remove the  Setup CD-ROM and keep it in a safe place.
Next, read "6 Loading Paper" on page 22!
When the Extended Survey Program  screen appears, confirm the 
message. 
If you can agree, click  Agree.
If you click  Do not agree , the Extended Survey Program  will not be installed. 
(This has no effect on the...

  7
6
1 2 354
USB
231
Connect one end of the USB cable to the computer 
and the other to the printer, then turn on the 
computer and insert the   Setup CD-ROM  into the 
CD-ROM drive. Double-click the  
Setup  icon.
If the CD-ROM folder does not open 
automatically, double-click the   CANON_IJ  icon 
on the  desktop .
The  USB port  is located on the right side at the back of 
the printer.
•
Enter your administrator name 
and password. Click  
OK .
If you do not know your 
administrator name or...

8
54
5
Click  Easy Install  .
The drivers, application software, and on-screen manuals are installed automatically.
Click  Install  .
Move the cursor over items to display explanations.
If you want to select particular items to install, click   Custom Install  and follow the on-
screen instructions to proceed with the installation.
•
Macintosh