Canon printer PIXMA iP2000 User Manual

Basic Printing
17
3Specify the required settings.
(1)Select PPrint from the application software's FFile menu. 
(3)Select the MMedia Type
from the pop-up menu.
(4)Select the print mode 
appropriate to your 
document from the P
Print 
Mode.
(2)Select QQuality & Media
from the pop-up menu.
(5) Click PPrint. Ensure that P
Paper Feed Switch
is selected from P
Paper Source.
QSG_Basic.fm  Page 17  Wednesday, May 19, 2004  5:30 PM 

Basic Printing
18
Note• Usually, select PPaper Feed Switch from PPaper Source. For detailed 
description of the P
Paper Source settings, refer to "UUsing the Auto 
Sheet Feeder and the Front Sheet Feeder" in the 
User’s Guide.
• When you select the print mode appropriate to your document from 
the P
Print Mode, the document will be printed in color and print 
quality suited to the characteristics of the M
Media Type you have 
selected. 
Printing a top-quality photo: Select when printing documents...

Basic Printing
19
Canceling Printing
You can cancel a print job while printing with the RRESUME/CANCEL button on the printer.
1Press the RESUME/CANCEL button while printing.
Printing is canceled and paper is fed out.
QSG_Basic.fm  Page 19  Wednesday, May 19, 2004  5:30 PM 

Advanced Printing
20
Advanced Printing
Printing Photographs Directly from a Digital Camera
Connecting a digital camera or camcorder to printer allows you to print 
recorded images directly without using a computer. This printer supports 
both PictBridge and Canon Bubble Jet Direct.
„Connecting to a Digital Camera
To connect a digital camera to this printer, use the USB cable supplied with the digital 
camera (for connection to a computer).Note• PictBridge is an Industry standard enabling a range of...

Advanced Printing
21
1Turn on the printer.
2Load the paper into the Auto Sheet Feeder.
Note• When printing with the digital camera connected to the printer, only the 
Auto Sheet Feeder can be used. The Front Sheet Feeder cannot be used.
• When printing photos with the digital camera connected to the printer, 
it is advisable to use the AC adapter supplied with the camera. If you 
use the camera battery, be sure to charge it fully.
• Depending on the model or brand of your camera, you may have to 
select...

Advanced Printing
22
3Connect the digital camera to the printer.
(1)Make sure the camera is turned off.
(3)Turn on and set up the camera for direct printing.
When the connection between the camera and printer has been established, the 
POWER lamp on the printer flashes once.
Either of the following icons will display on the LCD display of the digital camera 
when the printer is correctly connected. 
A PictBridge-compatible digital camera
A Canon Bubble Jet Direct compatible digital camera
„Direct...

Advanced Printing
23
„Default Camera Settings
When a PictBridge-compatible camera is connected and printing is started with no 
setting changes, this printer operates based on the following default settings:
- Paper size................... 4"×6"
- Paper type .................. Photo (Photo Paper Plus Glossy)
- Layout ........................ Borderless
- Trimming .................... Off (No trimming)
- Image optimize ........... On (Exif Print)
- Date print ................... Off (No printing)...

Advanced Printing
24
„About “Layout” and “Trimming”
By default, “Borderless” is selected in “Layout” and “Off (No trimming)” is selected 
in “Trimming” for this printer.
„About “Image optimize”
By default, “On (Exif Print)” is selected for this printer.
„About “Date print”
By default, “Off” is selected for this printer.
“Date Print” depends on the settings using the controls of the camera.
„Printing Photographs Directly from a Canon Bubble Jet Direct 
compatible Digital Cameras
Let’s take a look at the...

Advanced Printing
25
Note• For the digital camera operation method and troubleshooting, refer 
to your digital camera’s manual.
For print error messages, refer to "C
Cannot Print Properly from the 
Digital Camera" in the 
User’s Guide.
• By operating the digital camera, you can make the following prints:
- You can make a standard print from the image displayed in the 
single display mode or in the index display mode.
- You can print specified numbers of images, or make an index print 
by editing...

Advanced Printing
26
Accessing Printer Driver
The PPrinter Properties dialog box can be opened from either within an 
application, or directly from the Windows S
Start menu.
„Opening the Printer Properties Dialog Box from Your Application 
Program
1In your application, select the command to print a document.
The PPrint dialog box can usually be opened by selecting PPrint from the FFile menu.
2Ensure that the Canon PIXMA iP2000 is selected. Then click Preferences (or 
Properties).
The PPrinter Properties...