Canon printer PIXMA iP110 User Manual

TroubleshootingFrequently Asked Questions
Connecting Computer or Smartphone to Printer Directly via Wireless LAN
(Access Point Mode)
Changing Printer Setting to Use Wireless LAN via Wireless LAN Router
The Printer Cannot Be Powered On
Printing Does Not Start
Paper Does Not Feed Properly/"No Paper" Error Occurs
Print Results Not Satisfactory
Ink Is Not Ejected
Paper Jams
If an Error Occurs
Search Each Function
Problems with Network Communication
Problems with Printing
Problems with Printing...

Problems with Network Communication
Problems with the Printer While Using with Network
Cannot Detect a Printer on a Network
Other Problems with Network
412 

Problems with the Printer While Using with Network
The Printer Stopped Working Suddenly
Ink Remaining Level Is Not Displayed on Printer Status Monitor of the Printer
Printing Speed Is Slow
Cannot Use the Printer on Replacing an Access Point or Changing Its settings
413 

The Printer Stopped Working Suddenly
Cannot Communicate with the Printer After the Network Settings Are Changed
Cannot Communicate with the Printer over the Wireless LAN
Cannot Communicate with the Printer Using the Access Point Mode
Cannot Print from a Computer Connected to the NetworkCannot Communicate with the Printer After the Network Settings AreChanged
It may take a while for the computer to obtain the IP address, or you may need to restart your computer.
Search for the printer again after...

The wireless channel to be used may be limited depending on wireless network devices installed in the
computer. Refer to the instruction manual provided with your computer or your wireless network device to
specify the valid wireless channel.
Check9  Make sure that the channel confirmed in Check 8 can communicate with the
computer.
If not, change the channel set to the access point.
Check10  Make sure that the firewall of the security software is disabled.
If the firewall function of your security...

2.Press and hold the Wi-Fi button, then release the button when the  POWER lamp flashes 3 times.
When the  POWER lamp changed from flashing to lit, the access point mode is enabled.
Check3
 Is the printer selected to connect external communication devices (e.g.
computers, smartphones, or tablets)?
Select an access point name (SSID) specified for the printer as a destination for external communication devices.
Check4  Enter a password if you specify it for the printer.
Check5 Make sure that external...

Ink Remaining Level Is Not Displayed on Printer Status Monitor of
the Printer
Use the printer driver with bidirectional communication.Select  Enable bidirectional support  in the Ports sheet of the properties dialog box of the printer driver.
How to Open the Printer Driver Setup Window
417 

Printing Speed Is Slow
Check1 The printer may be printing out a large job issued from another computer.
Check2
 Make sure that the radio status is good and adjust the installation positions
while monitoring the radio status with IJ Network Tool.
Monitoring Wireless Network Status
Make sure that there is no barrier or obstacle between the access point and the printer. Wireless communication
between different rooms or floors is generally poor. The metal, concrete, or timber including the metallic...

Cannot Use the Printer on Replacing an Access Point or Changing
Its settings
When you replace an access point, perform network setup of the printer again.
Perform network setup again with the Setup CD-ROM or perform it again according to the instructions on
our website.
If the problem is not resolved, see below.
Cannot Communicate with the Printer After Applying MAC/IP Address Filtering or Entering an Encryption
Key to the Access Point
When Encryption Is Enabled, Cannot Communicate With the Printer After...

Cannot Detect a Printer on a Network
Cannot Detect the Printer When Setting up Network Communication
The Printer Cannot Be Detected in the Wireless LAN
420