Canon printer MAXIFY MB5120 User Manual

PreviewIconShows the settings of the  Tiling/PosterPrinting dialog box.
You can check what the print result will look like.
ImageDivisions Select the number of divisions (vertical x horizontal).
As the number of divisions increases, the number of sheets used for printing increases. If you are pasting pages together to create a poster, increasing the number of divisions allows you to create a
larger poster.
Print"Cut/Paste"inmargins Specifies whether to print the words "Cut" and...

MarginSpecifies the width of the stapling margin.
The specified width becomes the stapling margin from the center of the sheet.
PageBorder Prints a page border line around each document page.Check this check box to print the page border line.
PrintAreaSetupdialogbox When you perform duplex printing, the print area of the document becomes slightly narrower than usual.
Therefore when a document that has small margins is printed, the document may not fit on one page.
This dialog box allows you to set...

Note

Note

PrintsemitransparentstampSets how the stamp is to be printed over the document.
Check the  Stamp check box to enable this.
Check this check box to print a semi-transparent stamp over the printed document page. Uncheck this check box to print the stamp over the document data. The printed data may be hidden
behind the stamp.
Note

Important

OrientationSpecifies the angle of rotation for the stamp. The angle can be set by entering the number of
degrees.
Negative values rotate the stamp clockwise.
Note

IntensityAdjusts the intensity of the bitmap to be used as a background.
Moving the slider to the right increases the intensity, and moving the slider to the left decreases the
intensity. To print the background at the original bitmap intensity, move the slider to the rightmost
position.
Note

MaintenancetabDescriptionThe  Maintenance  tab allows you to perform printer maintenance or change the settings of the printer.
Cleaning
Performs print head cleaning.
Print head cleaning removes any blockage in the print head nozzles.
Perform cleaning when printing becomes faint, or a specific color fails to print, even though all ink levels are sufficiently high.
DeepCleaning
Performs deep cleaning.
Perform deep cleaning when two cleaning attempts do not resolve the print head problem.
Note

PrintHeadAlignment
Print head alignment corrects the installation positions of the print head and improves deviated colors
and lines.
Align the print head immediately after installing the print head. When you click  PrintHeadAlignment , the 
StartPrintHeadAlignment dialog box is displayed.
NozzleCheck
Prints a nozzle check pattern.
Perform this function if printing becomes faint or a specific color fails to print. Print a nozzle check
pattern, and check whether the print head is working...