Canon printer MAXIFY MB5120 User Manual

4.Set the number of image divisions and the pages to be printed
If necessary, click  Specify..., specify the following settings in the  Tiling/PosterPrinting dialog box,
and then click  OK.
ImageDivisions
Select the number of divisions (vertical x horizontal).As the number of divisions increases, the number of sheets used for printing increases. If you are
pasting pages together to create a poster, increasing the number of divisions allows you to create
a larger poster....

In the settings preview on the left of the PageSetup tab, click the pages that do not need to be
printed.
The pages that were clicked are deleted, and only the pages to be printed are displayed.
Note

BookletPrintingThe booklet printing function allows you to print data for a booklet. Data is printed on both sides of the paper.
This type of printing ensures that pages can be collated properly, in page number order, when the printed sheets are folded and stapled at the center.
The procedure for performing booklet printing is as follows:
1.
Open the printer driver setup window
2.
Set booklet printing
Select  Booklet  from the  PageLayout  list on the PageSetup  tab.
The current settings are displayed...

MarginforstaplingSelect which side should the stapling margin be on when the booklet is completed.
Insertblankpage To leave one side of a sheet blank, check the check box, and select the page to be left blank.
Margin Enter the margin width. The specified width from the center of the sheet becomes the margin width
for one page.
PageBorder To print a page border around each document page, check the check box.
5.
Complete the setup
Click  OK on the  PageSetup  tab.
When you execute print, the document...

DuplexPrinting
The procedure for printing data on both sides of a sheet of paper is as follows:
You can also set duplex printing in  AdditionalFeatures on the QuickSetup  tab.
PerformingAutomaticDuplexPrinting You can perform the duplex printing without having to turn over the paper.
1.
Open the printer driver setup window
2.
Set automatic duplex printing
Check the  DuplexPrinting  check box on the  PageSetup tab and confirm that  Automatic is checked.
3.
Select the layout
Select  Normal-size ,...

When you perform duplex printing, the print area of the document becomes slightly narrower thanusual and the document may not fit on one page. Click  PrintAreaSetup... , select one of the following process methods, and then click  OK.
Usenormal-sizeprinting
Print without reducing the page.
Usereducedprinting Reduce the page slightly during printing.
5.
Specify the side to be stapled
The best  StaplingSide  is selected automatically from the  Orientation and PageLayout  settings. To
change the...

3.
Select the layoutSelect  Normal-size , Fit-to-Page , Scaled , or PageLayout  from the PageLayout  list.
4.
Specify the side to be stapled
The best  StaplingSide  is selected automatically from the  Orientation and PageLayout  settings. To
change the setting, select another stapling side from the list.
5.
Set the margin width
If necessary, click  SpecifyMargin... and set the margin width, and then click  OK.
6.
Complete the setup
Click  OK on the  PageSetup  tab.
When you execute print, the...

Stamp/BackgroundPrintingStamp  or Background  may be unavailable when certain printer drivers or operating environments are used.
The  Stamp  function allows you to print a stamp text or a bitmap over or behind document data. It also
allows you to print date, time and user name. The  Background function allows you to print a light illustration
behind the document data.
The procedure for performing stamp/background printing is as follows:
PrintingaStamp
"CONFIDENTIAL," "IMPORTANT," and...

Note