Canon printer MAXIFY MB5120 User Manual

Check the Background  check box, and select the background to be used from the list.
The current settings are displayed in the settings preview on the left side of the  PageSetup tab.4.
Set the background details
If necessary, complete the following settings, and then click  OK.
SelectBackground...button To 
use another background or change the layout or density of a background , click this.
Backgroundfirstpageonly To print the background only on the first page, check this check box.
5.
Complete...

RegisteringaStampThis feature may be unavailable when certain printer drivers or operating environments are used.
You can create and register a new stamp. You can also change and re-register some of the settings of an
existing stamp. Unnecessary stamps can be deleted at any time.
The procedure for registering a new stamp is as follows:
RegisteringaNewStamp1.
Open the printer driver setup window
2.
Click  Stamp/Background...  (Stamp... ) on the PageSetup  tab
The Stamp/Background  (Stamp ) dialog...

3.Click DefineStamp...
The  StampSettings  dialog box opens.4.
Configure the stamp while viewing the preview window

Click the Savesettings  tab and enter a title in the  Title box, and then click  Save.
Click  OK when the confirmation message appears.
Note

RegisteringImageDatatobeUsedasaBackgroundThis feature may be unavailable when certain printer drivers or operating environments are used.
You can select a bitmap file (.bmp) and register it as a new background. You can also change and register some of the settings of an existing background. An unnecessary background can be deleted.
The procedure for registering image data to be used as a background is as follows:
RegisteringNewBackground1.
Open the printer driver setup window
2.
Click...

3.Click SelectBackground...
The  BackgroundSettings  dialog box opens.4.
Select the image data to be registered to the background
Click  SelectFile... . Select the target bitmap file (.bmp), and then click  Open.
5.
Specify the following settings while viewing the preview window
LayoutMethod Select how the background image data is to be placed.When  Custom  is selected, you can set coordinates for  X-Position and Y-Position .
You can also change the background position by dragging the image in the...

Select the Background  check box in the  Stamp/Background  dialog box. Then from the list, select
the title of the background you want to change.2.
Click  SelectBackground...
The  BackgroundSettings  dialog box opens.
3.
Specify each item on the  Background tab while viewing the preview window
4.
Save the background
Click  Saveoverwrite  on the Savesettings  tab. When you want to save the background with a
different title, enter a new title in the  Title box and click  Save.
Click  OK when the...

SettingUpEnvelopePrintingThe procedure for performing envelope printing is as follows:1.
Load envelope  on the printer
2.
Open the printer driver setup window
3.
Select the media type
Select  Envelope  from CommonlyUsedSettings  on the QuickSetup  tab.
4.
Select the paper size
When the  EnvelopeSizeSetting  dialog box is displayed, select  EnvelopeCom10, EnvelopeDL ,
Yougata44.13"x9.25" , Yougata63.86"x7.48" , EnvelopeC5 , or EnvelopeMonarch3.88"x7.5"...

printer rotates the paper 90 degrees to the left to print, regardless of the Rotate90degreesleft
whenorientationis[Landscape@  setting for CustomSettings  on the Maintenance  tab.6.
Select the print quality
Select  High or Standard  that matches your purpose for  PrintQuality.
7.
Complete the setup
Click  OK.
When you execute print, the information is printed on the envelope.
Important

PrintingonPostcardsThis section describes the procedure for postcard printing.1.
Load postcard  on the printer
2.
Open the printer driver setup window
3.
Select commonly used settings
Display the  QuickSetup  tab, and for CommonlyUsedSettings , select Standard .
4.
Select the media type
For  MediaType , select InkJetHagaki(A) , InkJetHagaki , HagakiK(A) , HagakiK , Hagaki(A) , or
Hagaki .
Important