Canon printer MAXIFY MB2320 User Manual

Margin for staplingSelect which side should the stapling margin be on when the booklet is completed.
Insert blank page To leave one side of a sheet blank, check the check box, and select the page to be left blank.
Margin Enter the margin width. The specified width from the center of the sheet becomes the margin width
for one page.
Page Border To print a page border around each document page, check the check box.
5.
Complete the setup
Click  OK on the  Page Setup  tab.
When you execute print, the document...

Duplex Printing
The procedure for printing data on both sides of a sheet of paper is as follows:
You can also set duplex printing in  Additional Features on the Quick Setup  tab.
Performing Automatic Duplex Printing You can perform the duplex printing without having to turn over the paper.
1.
Open the printer driver setup window
2.
Set automatic duplex printingCheck the  Duplex Printing  check box on the  Page Setup tab and confirm that  Automatic is checked.
3.
Select the layout
Select  Normal-size ,...

Use normal-size printingPrint without reducing the page.
Use reduced printing Reduce the page slightly during printing.
5.
Specify the side to be stapled
The best  Stapling Side  is selected automatically from the  Orientation and Page Layout  settings. To
change the setting, select another stapling side from the list.
6.
Set the margin width
If necessary, click  Specify Margin... and set the margin width, and then click  OK.
7.
Complete the setup
Click  OK on the  Page Setup  tab.
When you execute...

3.
Select the layoutSelect  Normal-size , Fit-to-Page , Scaled , or Page Layout  from the Page Layout  list.
4.
Specify the side to be stapled
The best  Stapling Side  is selected automatically from the  Orientation and Page Layout  settings. To
change the setting, select another stapling side from the list.
5.
Set the margin width
If necessary, click  Specify Margin... and set the margin width, and then click  OK.
6.
Complete the setup
Click  OK on the  Page Setup  tab.
When you execute print, the...

Related Topic
Changing the Printer Operation Mode
415 

Stamp/Background PrintingStamp  or Background  may be unavailable when certain printer drivers or operating environments are used.
The  Stamp  function allows you to print a stamp text or a bitmap over or behind document data. It also
allows you to print date, time and user name. The  Background function allows you to print a light illustration
behind the document data.
The procedure for performing stamp/background printing is as follows:
Printing a Stamp
"CONFIDENTIAL," "IMPORTANT," and...

3.Select a stamp
Check the  Stamp check box, and select the stamp to be used from the list.
The current settings are displayed in the settings preview on the left side of the  Page Setup tab.4.
Set the stamp details
If necessary, specify the following settings, and then click  OK.
Define Stamp... button To 
change the stamp text, bitmap, or position , click this.
Place stamp over text To print the stamp on the front of the document, check this check box.
Note
•
The stamp is given priority because the...

Select Background... buttonTo 
use another background or change the layout or density of a background , click this.
Background first page only To print the background only on the first page, check this check box.
5.
Complete the setup
Click  OK on the  Page Setup  tab.
When you execute print, the data is printed with the specified background.
Note
•
The stamp and background are not printed on blank sheets inserted with the  Insert blank page
function of booklet printing.
Related Topics
Registering a...

Registering a StampThis feature may be unavailable when certain printer drivers or operating environments are used.
You can create and register a new stamp. You can also change and re-register some of the settings of an
existing stamp. Unnecessary stamps can be deleted at any time.
The procedure for registering a new stamp is as follows:
Registering a New Stamp1.
Open the printer driver setup window
2.
Click  Stamp/Background...  (Stamp... ) on the Page Setup  tab
The Stamp/Background  (Stamp ) dialog...

4.
Configure the stamp while viewing the preview window
•
Stamp tab
Select  Text, Bitmap , or Date/Time/User Name  that matches your purpose for  Stamp Type.
◦
For Text  registration, the characters must already be entered in  Stamp Text. If necessary,
change the  TrueType Font , Style , Size , and  Outline  settings. You can select the color of
the stamp by clicking  Select Color....
◦
For Bitmap , click Select File...  and select the bitmap file (.bmp) to be used. If necessary,
change the settings of...