Canon printer MAXIFY MB2120 User Manual

ManagingthePrinterPowerThis function allows you to manage the printer power from the printer driver.
The procedure for managing the printer power is as follows:
PowerOff
The  PowerOff  function turns off the printer. When you use this function, you will not be able to turn the
printer on from the printer driver.
1.
Open the printer driver setup window
2.
Execute power off
Click  PowerOff  on the Maintenance  tab. When the confirmation message appears, click  OK.
The printer power switches off, and...

ReducingthePrinterNoiseThe silent function allows you to reduce the operating noise of this printer. Select when you wish to reduce
the operating noise of the printer at night, etc.
Using this function may lower the print speed.
The procedure for using the quiet mode is as follows:
QuietSettings
1.
Open the printer driver setup window
2.
Click  QuietSettings  on the Maintenance  tab
The  QuietSettings  dialog box opens.
Note

Note

ChangingthePrinterOperationModeIf necessary, switch between various modes of printer operation.
The procedure for configuring  CustomSettings is as follows:
CustomSettings
1.
Open the printer driver setup window
2.
Make sure that the printer is on, and then click  CustomSettings on the Maintenance
tab
The  CustomSettings  dialog box opens.
Note

message display and allows you to continue printing.
To disable detection of paper setting mismatches, select this check box.
InkDryingWaitTime You can set the length of the printer rest time until printing of the next page begins. Moving the
slider to the right increases the pause time, and moving the slider to the left decreases the time. If the paper gets stained because the next page is ejected before the ink on the printed page
dries, increase the ink drying wait time. Reducing the ink drying...

ChangingSettingsfromOperationPanel
ChangingSettingsfromOperationPanel
SettingItemsonOperationPanel
FAXsettings
Printsettings
LANsettings
Deviceusersettings
Languageselection
Firmwareupdate
Cassettesettings
Administratorpasswordsetting
Operationrestrictions
Resetsetting
Webservicesetup
Systeminformation
ECOsettings
Quietsetting
RegisteringFavoriteSettings(Customprofiles)
CheckingtheTotalNumberofUsesofMachine
286 

ChangingSettingsfromOperationPanelThis section describes the procedure to change the settings in the  Devicesettings screen, taking the steps
to specify  Preventpaperabrasion  as an example.1.
Make sure printer is turned on.
2.
Select  Setup  on HOME screen.
LCD and Operation Panel
3.
Select  Devicesettings  and press OK button.
The  Devicesettings  screen appears.
4.
Select setting item and press  OK button.
The setting screen for the selected item is displayed.
5.
Select item and press  OK...

For more on setting items on the operation panel:
Setting Items on Operation Panel
288 

SettingItemsonOperationPanel
Note

FAXsettings
Important