Canon printer MAXIFY MB2020 User Manual

Remove the original on the platen glass or from the document output slot after copying is complete.
Important
•
If you load the original on the platen glass, do not open the document cover or remove the originalwhile  Scanning document...  is displayed on the LCD.
•
If you load the original in the ADF, do not move the original until copying is complete.
Note
•
To cancel copying, press the  Stop button.
•
If you load the original on the platen glass, you can add the copying job while printing.
Adding the...

•If you set a document of too many pages to add the copying job, Cannot add more copy jobs.
Please wait a while and redo the operation.  may appear on the LCD. Press the OK button and wait
a while, then try copying again.•
If  Failed to reserve the copy job. Start over from the beginning.  appears on the LCD when
scanning, press the  OK button, then press the  Stop button to cancel copying. After that, copy the
documents that have not been finished copying.
532 

Displaying the Preview ScreenPressing the center  Function button allows you to preview an image of the printout on the preview screen.
Important
•
The preview screen is not available when you load the original in the ADF.
•
In the following conditions, you cannot use the left  Function button when the Copy standby screen is
displayed.
•
2-sided  is selected for  2-sidedPrintSetting .
•
2-on-1 copy or 4-on-1 copy  is selected for  Layout.
•
ON is selected for  Collate.
When either of the conditions above...

Setting Items for CopyingThe following screen is displayed by pressing the right  Function button on the Copy standby screen.
Use the 
 button to change the setting item and use the  button to change the setting.
Note
•
Some settings cannot be specified in combination with the setting of other setting item or the copy menu. If the setting which cannot be specified in combination is selected,  Error details is displayed on
the LCD. In this case, press the left  Function button to confirm the message, then...

5.Print qlty (Print quality)
Adjust print quality according to the original.
Important
•
If you use  Standard with Type set to  Plain paper  and the quality is not as good as expected,
select  High for Print qlty  and try copying again.
•
Select High for Print qlty  to copy in grayscale. Grayscale renders tones in a range of grays
instead of black or white.
6.
Layout
Select the layout.
Copying Two Pages to Fit onto a Single Page
Copying Four Pages to Fit onto a Single Page
7.
2-sidedPrintSetting
Select...

Reducing or Enlarging a CopyYou can specify the magnification optionally or select the preset-ratio copying or fit-to-page copying.
The LCD below is displayed when you press the right  Function button in the Copy standby screen. Select
the reduction/enlargement method from  Magnif..
Note
•
Some of the reduction/enlargement methods are not available depending on the copy menu.
•
Fit to page
The machine automatically reduces or enlarges the image to fit the page size.
The setting in  Magnif.: Fit to page...

If you select other than Fit to page and press the right  Function button, Magnification  screen is
displayed. Use the 
 button to specify the magnification.
Note
•
400% MAX  (maximum copy ratio) and  25% MIN (minimum copy ratio) are selectable.
•
If you make a copy at the same size as the original, select  Same size.
537 

Two-Sided CopyingWhen you select  2-sided for 2-sidedPrintSetting  in Standard copy , you can copy two original pages onto
the both sides of a single sheet of paper.
Press the right  Function button to select the orientation and the stapling side.
•
When you select  Portrait for Orientation  and Long-side stapling  for Stapling side of print paper :
•
When you select Portrait for Orientation  and Short-side stapling  for Stapling side of print paper :
•
When you select Landscp. for Orientation  and...

When Loading the Original on the platen glass:•
Before scanning:
When you select  2-sided for 2-sidedPrintSetting  and the preview function is activated, the machine
starts pre-scanning before scanning the original. When pre-scanning is finished, the screen below
(preview screen) is displayed on the LCD.
1.
Rotate
If you press the right  Function button, the original rotates by 180 degrees.
2.
Rescan
If you press the left  Function button, the original is rescanned.
Press the  OK button to start...

About Special Copy Menu
Copying Thick Originals Such as Books
540