Canon printer imageCLASS MF6595CX User Manual

Copying
3-6

Adjusting Manually
1 Press [COPY].
2 Press [Density] twice to select the manual mode.
3 Press [] or [] to adjust the copy density, then press [OK].
[]: to make dark documents lighter
[]: to make light documents darker
To cancel all settings, press [Reset].
When you switch the mode by pressing the mode keys such as [FAX], all se\
ttings will be also 
canceled. If you want to keep the settings, set the density as follows: 
[Additional Functions] →  →  →  →  
(See “STANDARD SETTINGS,” on p....

3-7
Copying

Zoom Ratio
The default setting is .
Preset Zoom
You can enlarge or reduce documents from one standard paper size to another.
1 Press [COPY].
2 Press [Enlarge/Reduce].
● 

Copying
3-8

3 Press [] or [] to select the copy ratio, then press [OK].
200% MAX.
129% STMT → LTR
100%
78% LGL → LTR
64% LTR → STMT
50% MIN.
When  in the  menu is set to  or , the preset copy 
ratios change as follows:
A: 50%, 70%, 100%, 141%, 200%
AB: 50%, 70%, 81%, 86%, 100%, 115%, 122%, 141%, 200%
–
–
–
–
–
– 

3-9
Copying

Zoom Designation
You can reduce or enlarge images by any copy ratio, in 1% increments. The available copy 
ratios are from 50% to 200%.
1 Press [COPY].
2 Press [Enlarge/Reduce] twice.
3 Enter the copy ratio with the numeric keys, then press [OK].
ZOOM50-200%
-80%+
Ex.
You can also use [] or [] to adjust the zoom ratio. To increase the zoom ratio, press []. To 
decrease the zoom ratio, press [].
To return the copy ratio to 100%, press [Enlarge/Reduce] repeatedly to display , then 
press...

Copying
3-10

Collate Copy
You can copy documents collated into sets arranged in page order. This feature can 
be used together with “Two-Sided Copy,” on p. 3-16, “2 on 1 Combination ,” on p. 3-12, 
“Original Frame Erase,” “Book Frame Erase,” and “Binding Hole Erase.”(See Chapter 3, 
“Copying,” in the Reference Guide).
1 Set documents.
Place the first page on the platen glass if you are not using the ADF.
2 Press [COPY].
If  is set to  in  in , skip to step 
5.
3 Press [Collate].
 appears in the LCD.
4...

3-11
Copying

5 Use the numeric keys to enter the desired copy quantity (1 to 99).
6 Press [Start].
When the documents are loaded in the ADF, collate copying starts and no further operation is required.
7 Place the next page of the document on the platen glass, then press [Start].
Repeat this step to scan all pages.
8 Press [OK].
The machine prints the remaining sets of copies.
To cancel all settings, press [Reset].
When you switch the mode by pressing the mode keys such as [FAX], all se\
ttings will be...

Copying
3-12

2 on 1 Combination
2 on 1 combination automatically reduces two-page document to fit on the selected 
paper size. This feature can be used together with “Collate Copy,” on p. 3-10, “Two-
Sided Copy,” on p. 3-16, and “Binding Hole Erase.”(See Chapter 3“Copying,” in the 
Reference Guide).
NOTE
“2 on 1 Combination” cannot be used together with “Original Fra\
me Erase” or “Book Frame Erase.” 

3-13
Copying

1 Set documents.
Place the first page on the platen glass if you are not using the ADF.
2 Press [COPY].
3 Press [2 on 1]. 

Copying
3-14

4 Press [] or [] to select , then press [OK].
5 Press [] or [] to select the size of the document, then press [OK].
6 Press [] or [] to select the paper size, then press [OK].
7 Use the numeric keys to enter the desired copy quantity (1 to 99). 

3-15
Copying

8 Press [Start].
When you set the document on the platen glass, press [Start] for each page. When scanning is 
complete, press [OK].
A maximum of 1/8" (2 to 3 mm) margin will be produced between the two reduced documents in 2 
on 1 combination copying.
To cancel all settings, press [Reset].
When you switch the mode by pressing the mode keys such as [FAX], all se\
ttings will be also 
canceled. If you want to keep the settings, store the settings in  in , See “STANDARD SETTINGS,” on p....