Canon printer imageCLASS MF6595CX User Manual

Copying
3-16

Two-Sided Copy
Two-sided copying enables you to make two-sided copies from one-sided or two-
sided documents, or make one-sided copies from two-sided documents. This feature 
can be used together with “Collate Copy,” on 3-10, “2 on 1 Combination ,” on 3-12, 
“Original Frame Erase,” “Book Frame Erase,” and “Binding Hole Erase.” (See Chapter 
3,“Copying,” in the Reference Guide).
Paper used to make two-sided copies must conform to the following specif\
ications:
Paper size: LGL and LTR (A4...

3-17
Copying

2 to 2-Sided Copying
2 to 1-Sided Copying
●
● 

Copying
3-18

1 to 2-Sided
You can make two-sided copies from one-sided documents.
1 Set documents.
Place the first page on the platen glass if you are not using the ADF.
2 Press [COPY].
3 Press [2-Sided].
4 Press [] or [] to select  2-SIDED>, then press [OK].
5 Press [] or [] to select  or , then press 
[OK].
: The front and back sides of the copy will have the same top-bottom orientation.
: The front and back sides of the copy will have opposite top-bottom orientations.
For the landscape oriented...

3-19
Copying

6 Use the numeric keys to enter the desired copy quantity (1 to 99).
7 Press [Start].
When you set the document on the platen glass, press [Start] for each page. When scanning is 
complete, press [OK].
To cancel all settings, press [Reset].
When you switch the mode by pressing the mode keys such as [FAX], all se\
ttings will be also 
canceled. If you want to keep the settings, store the settings in  in , See “STANDARD SETTINGS,” on p. 12-10.
Instead of performing step 5, you can just press...

Copying
3-20

2 to 2-Sided
You can make two-sided copies from two-sided documents.
1 Set documents.
2 Press [COPY].
3 Press [2-Sided].
4 Press [] or [] to select  2-SIDED>, then press [OK].
5 Press [] or [] to select  or  (for the 
documents), then press [OK].
: The front and back sides of the document have the same top-bottom orientation.
: The front and back sides of the document have opposite top-bottom orientations.
● 

3-21
Copying

6 Press [] or [] to select  or  (for the 
copies), then press [OK].
7 Press [Start].
To cancel all settings, press [Reset].
When you set the document on the platen glass, press [Start] for each document. When scanning is 
complete, press [OK].
You can skip steps 5 and 6. In this case, the machine scans two-sided do\
cuments in the  
orientation and outputs the same way.
If you press [Start] in step 5 after selected , the machine scans two-sided 
documents in the  orientation and outputs...

Copying
3-22

2 to 1-Sided
You can make one-sided copies from two-sided documents.
1 Set documents.
2 Press [COPY].
3 Press [2-Sided].
4 Press [] or [] to select  1-SIDED>, then press [OK].
● 

3-23
Copying

5 Press [] or [] to select  or , then press 
[OK].
: The front and back sides of the document have the same top-bottom orientation.
: The front and back sides of the document have opposite top-bottom orientations.
6 Press [Start].
To cancel all settings, press [Reset].
When you set the document on the platen glass, press [Start] for each document. When scanning is 
complete, press [OK].
You can skip step 5. In this case, the machine scans two-sided documents in the  
orientation to make...

Copying
3-24

Canceling Copy Jobs
Follow the procedures to cancel an ongoing job.
1 Press [Stop].
2 When the  message appears, press [OK].
STOPKEYPRESSED
PRESSOKKEY
Ex.
 When the  message appears, press [] to select .
CANCEL   COPYING?

Ex.
The job is canceled, and the copy quantity is reset.
The  message appears only when the [Stop] key is pressed while the document is 
being scanned. 

3-25
Copying

Checking and Deleting Copy Jobs
System monitor enables you to monitor the status of copy jobs currently being 
processed.
1 Press [System Monitor].
2 Press [] or [] to display , then press [OK].
3 Press [] or [] to scroll through the job list.
When you delete the copy job, press [OK], then press [] to select .
4 Press [Stop] to return to the standby mode.