Canon printer imageCLASS MF6180dw User Manual

							FT6-0759   (000)
Getting StartedEn
Mise en route Fr
Introducción Es
Introdução Pt 
						

							X 13
Limited Warranty Notice (US Only)
X 2X 1
X 1 
						

							X 5X 1
X 2
X 1
X 1 
						

							Attach the Optional Cassette to the 
Machine
Option
18 5/8
(473 mm)
17 3/8
(441 mm)
15 3/8
(390 mm)
2 3/4 
(68 mm)
10 3/8 
(264 mm)
17
(431 mm)
5 1/2
(138 mm)
★ = 4″ (100 mm) 
						

							EnglishTake the cassette from the carton, and remove 
all packing materials, including shipping 
tape before attaching the optional cassette 
to the machine. Make sure the machine and 
the optional cassette are facing in the same 
direction when being attached. NOTE
When moving the main unit, be sure to carry 
it from front side by using the provided hand 
grips on the left and right sides, as seen in the 
illustration.
Français Sortez la cassette de son carton et retirez 
tous les matériaux d’emballage, y compris la 
bande adhésive d’expédition, avant de 
fi xer 
la cassette en option sur l’unité principale. 
Vérifi  ez que l’unité principale et la cassette en 
option font face à la même direction lorsque 
vous les  fi xez. REMARQUE
Lorsque vous déplacez l’unité principale, veillez 
à la transporter depuis l’avant en la tenant par 
les poignées de transport à gauche et à droite, 
comme dans l’illustration.
Español
Extraiga el casete de la caja y retire todo el 
envoltorio, incluyendo la cinta adhesiva para 
el transporte, antes de conectar el casete 
opcional a la máquina. Asegúrese de que la 
máquina y el casete opcional estén orientados 
en la misma dirección cuando los conecte. NOTA
A la hora de mover la unidad principal, 
asegúrese de sujetarla por la parte delantera, 
utilizando las asas situadas en los lados 
derecho e izquierdo, tal y como se indica en la 
ilustración.
Português Antes de prender a gaveta opcional na 
máquina, retire-a da caixa e remova todos 
os material de embalagem, incluindo a 
fi ta 
de proteção de transporte. Certifi  que-se de 
que a máquina e a gaveta opcional estejam 
voltadas para a mesma direção ao prendê-la 
na máquina. NOTA
Ao mover a unidade principal, transporte-a 
pela parte da frente usando as alças de 
apoio dos lados direito e esquerdo, conforme 
mostrado na ilustração.  
						

							6
Índice Contenido Table des matières Contents
About the Supplied Manuals .....................................8
Navigating the Menu and Text Input Method .............8
Connecting the Power Cord and Turning ON 
the Power ..................................................................9
Specifying the Initial Settings ....................................9
Choosing the Method to Connect the Machine to 
the Computer ............................................................9
Choosing the Method to Connect: 
Via Wireless LAN or Other Method ...........................9
Connecting via a Wired LAN ...................................10Connecting via a USB Cable...................................10
Connecting via a Wireless LAN ...............................10
Setting Wireless LAN ..............................................11
Setting a Paper Size and Type ................................13
Specifying Initial Fax Settings and Connecting 
a Telephone Cable  .................................................13
Installing the Driver/Software ..................................13
Perform Useful Tasks ..............................................14
Clearing Paper Jams...............................................15
Replacing Toner Cartridge ......................................16
A propos des manuels fournis .................................22
Navigation dans le menu et méthode de saisie du 
texte ....................................................................\
....22
Branchement du cordon d’alimentation et mise 
sous tension............................................................23
Confi  guration des réglages initiaux .........................23
Choix de la méthode de connexion de la machine 
à l’ordinateur ...........................................................23
Choix de la méthode de connexion : 
par réseau sans  fi l ou via une autre méthode ..........23
Connexion via un réseau  fi laire ...............................24 Connexion via un câble USB ..................................24
Connexion via un réseau sans 
fi l.............................24
Confi  guration du réseau sans  fi l ..............................25
Réglage du format et du type de papier ..................27
Confi  guration des réglages de fax initiaux et 
connexion d’un câble téléphonique  ........................27
Installation du pilote et/ou du logiciel ......................27
Procédures utiles ....................................................28
Résolution des bourrages papier ............................29
Remplacement de la cartouche d’encre .................30
Acerca de los manuales suministrados ...................36
Navegación por el menú y método de introducción 
de texto ...................................................................36
Conexión del cable de alimentación y encendido 
del interruptor de alimentación ................................37
Especifi  cación de la con fi guración inicial ................37
Selección del método para conectar la máquina 
al ordenador ...........................................................37
Selección del método de conexión: 
a través de red LAN inalámbrica u otro método ......37
Conexión mediante una red LAN cableada ............38 Conexión con un cable USB ...................................38
Conexión mediante una red LAN inalámbrica .........38
Confi
 guración de LAN inalámbrica .........................39
Ajuste del tamaño y el tipo del papel .......................41
Especifi  cación de la con fi guración inicial de fax y 
conexión del cable del teléfono  ..............................41
Instalación del controlador/el software ....................41
Tareas útiles ............................................................42
Eliminación de atascos de papel ............................43
Sustitución del cartucho de tóner ............................44
Sobre os manuais fornecidos .................................50
Navegação pelo menu e pelo método de entrada 
de texto ...................................................................50
Como conectar o cabo de alimentação e ligar 
a máquina ...............................................................51
Especifi  cação das con fi gurações iniciais ................51
Escolha do método de conexão da máquina ao 
computador ............................................................51
Escolha do método de conexão: 
por LAN sem fi  o ou outro método ...........................51
Conexão via LAN com  fi o........................................52 Conexão via cabo USB ...........................................52
Conexão via LAN sem 
fi o ........................................52
Confi  guração da LAN sem  fi o 
 .................................53
Confi  guração do tamanho e do tipo de papel .........55
Especifi  cação das con fi gurações iniciais do fax e 
conexão do cabo telefônico  ...................................55
Instalação do driver/software ..................................55
Tarefas úteis ............................................................56
Eliminação de obstruções de papel ........................57
Substituição do cartucho de toner ..........................58 
						

							7 
						

							8
En
 Navigating the Menu and Text Input Method
▲▼◀▶OK
Menu Back#CNumeric keys
About the Supplied Manuals

Getting Started (This manual):
Read this manual  fi rst. This manual 
describes the installation of the 
machine, the settings, and a caution. 
Be sure to read this manual before 
using the machine.
  MF Driver Installation Guide 
(User Software and Manuals CD-
ROM):
Read this manual next. This manual 
describes software installation.
  Send Setting Guide
(User Software and Manuals CD-
ROM):
Read this section for how to set Send 
features.
  e-Manual 
(User Software and Manuals CD-
ROM):
Read the desired chapter to suit your 
needs. The e-Manual is categorized by 
subject to fi  nd desired information easily.
Viewing the e-Manual from the CD-ROM
1  Insert the User Software and Manuals CD-ROM in your computer.
2 Click [Manuals].
3 Click [e-Manual].
  Depending on the operating system you are using, a security protection message appears. 
   If the User Software and Manuals CD-ROM has been already inserted in your computer 
and [Manuals] is not displayed, remove the CD-ROM and insert it again.
Navigating the Menu
Item selection or moving the 
cursor among the menu items
Select an item with [ ▲] or [▼]. 
Proceed to the next hierarchy with 
[OK] or [ ▶]. Return to the previous 
hierarchy with [ 
 ] (Back) or [◀].
Setting con fi rmation
Press [OK]. However, when  
appears on the display, select 
, and then press [OK].
Text Input Method
Changing entry mode
Press [▼] to select , 
and then press [OK]. You can also 
press [ 
 ] (Tone) to change the 
entry mode.
Entering text, symbols, and 
numbers
Enter with the numeric keys or 
[ 
 ] (SYMBOLS).
Moving the cursor (Entering a 
space)
Move with [◀] or [▶]. Move the cursor 
to the end of the text and press [▶] to 
enter a space.
Deleting characters
Delete with [ 
 ] (Clear). Pressing 
and holding [  ] (Clear) deletes all 
characters.
Entering text, symbols, and 
numbers
Entry mode: 
 Entry mode: 
 Entry mode: 

@ . - _ / 1
ABC abc 2
DEF def3
GHI ghi4
JKL jkl5
MNO mno 6
PQRS pqrs 7
TUV tuv 8
WXYZ wxyz 9
(Not available)0
- . * # ! “ , ; : ^ ` _ = / | ‘ ? $
@ % & +  ˜ ( ) [ ] { } < >  (Not 
available)
Changing entry mode
Entry mode Available text
 Uppercase alphabetic letters 
and symbols
 Lowercase alphabetic letters 
and symbols
 Numbers 
						

							9
En
Connecting the Power Cord and Turning 
ON the Power
(2)
(1)
  Do not connect the USB cable at this time. Connect it when installing software.
Specifying the Initial Settings
Follow the instructions on the screen, set the language and 
time. For details on navigating the menu and how to input 
the numbers, see “Navigating the Menu and Text Input 
Method” (
  P.8).
Language
 English
 French
 Spanish 
 PortugueseCurrent Time Settings
01/01/2011 12:5 2 AM
NOTE
•  About 
The time zone setting indicates the time di ff erence 
between your local time zone and Greenwich Mean 
Time (GMT). The correct time zone setting is required 
for Internet communications.
In the U.S.:
Eastern Standard Time(EST): GMT-5
Central Standard Time(CST): GMT-6
Mountain Standard Time(MST): GMT-7
Paci fi c Standard Time(PST): GMT-8
Choosing the Method to Connect the 
Machine to the Computer
 
●Connecting via a Wired LAN
You can connect the machine to the computer through a 
wired router. Use the LAN cables to connect the machine 
to the wired router (access point).
   Make sure that there is an available port in the router to connect 
the machine and the computer.
   Have a LAN Cable of Category 5 twisted-pair cable or higher ready.  
●
Connecting via a USB cable
You can connect the machine to the computer using a 
USB cable.
   Make sure that the USB cable you use has the following mark.
 
●Connecting via a Wireless LAN
You can connect the machine to the computer through 
a wireless router*. Since it is connected to wireless, no 
LAN cables are needed.
*  A wireless router (access point), which supports IEEE802.11b/
g/n, is required.
Check if your router has a button
Select from the following two methods depending on 
the router (access point) that you are using.
 
●There is a button.
You can easily setup if your router (access point) 
has a button, and if the mark is on the router. 
 
●There is no button.
If there is no button on your router (access point), 
you may manually select SSID and complete the 
settings.
   If you are looking to install your new device via a Wireless 
Network connection, you can  fi nd a video and written guides 
with step-by-step instruction to assist you through the process 
from the following URL:
www.usa.canon.com/WirelessHelp
Viewing these guides will ensure a smooth setup of the device 
into your existing wireless environment.
Choosing the Method to Connect: 
Via Wireless LAN or Other Method
Use wireless LAN to 
connect computer?
(Can config. later.)
No
Yes
Ye s
No
 
●There is a button.  Start from step 4 of “Push Button Mode” (P.11). 
●There is no button.  Start from step 4 of “Setting the Access Point 
Manually” (P.12).
Connect to the computer via a wired LAN
  Proceed to “Connecting via a Wired LAN” (P.10).
Connect to the computer via a USB cable
  “Connecting via a USB Cable” (P.10).
Connect to the computer via a wireless LAN later
  Proceed to “Connecting via a Wireless LAN” (P.10). 
						

							10
En
 Connecting via a Wired LAN
Checking Before the Setup
InternetRouter
or
hub
LAN cable
Is the computer and the router (or hub) properly 
connected using a LAN cable?
For more information, see the instruction manual for the 
network device you are using, or contact the networking 
device manufacturer.
Has the network settings on the computer been 
completed?
If the computer is not properly con fi gured, you may not 
use the wired LAN connection even after completing the 
following settings.
NOTE
•  You cannot connect both the wired LAN and wireless  LAN at the same time. In addition, the machine is set 
to the Wired LAN by default.
•  When you connect to a network environment that  is not security protected, your personal information 
could be disclosed to third parties. Please use 
caution.
•  If you connect through a LAN in the o ffi  ce, contact 
your network administrator.
Connecting via a Wired LAN
1 Connect the LAN cable.
The IP address will be automatically con fi gured in 2 
minutes. If you want to set the IP address manually, see 
the following items.
  e-Manual “Network Settings”  ▶ “Basic Network 
Settings” ▶ “Setting the IP Address”
2 Install the driver and software using the User 
Software and Manuals CD-ROM.
 See “Installing the Driver/Software” (P.13).
 Proceed to “Setting a Paper Size and Type” (P.13).
 Connecting via a USB Cable
Connect the USB cable after installing the MF Drivers and 
the MF Toolbox.
NOTE
•  If you connected the USB cable before installing the  MF drivers, refer to the MF Driver Installation Guide.
1 Install the driver and software using the User 
Software and Manuals CD-ROM.
 See “Installing the Driver/Software” (P.13).
2 Connect the USB cable.
 Proceed to “Setting a Paper Size and Type” (P.13).
 Connecting via a Wireless LAN
Checking Before the Setup
Wireless LAN Router
Internet
Is the computer connected to the router (access 
point) correctly by a LAN cable or wireless LAN?
For more information, see the instruction manual for the 
network device you are using, or contact the networking 
device manufacturer.
Has the network settings on the computer been 
completed?
If the computer is not properly con fi gured, you may not use 
the wireless LAN connection even after completing the 
following settings.